March 20, 20213 yr I guess we will see a new evolution of C+ here, the new 6-port hub like the Spike one where it is possible to store programs and scripts to run without smart device.
March 20, 20213 yr 2 hours ago, Timorzelorzworz said: I guess we will see a new evolution of C+ here, the new 6-port hub like the Spike one where it is possible to store programs and scripts to run without smart device. Is this based off a rumour or just pure speculation? Edited March 20, 20213 yr by Bartybum
March 20, 20213 yr Author 2 hours ago, Timorzelorzworz said: I guess we will see a new evolution of C+ here, the new 6-port hub like the Spike one where it is possible to store programs and scripts to run without smart device. I'd wager it's the same setup as 8275. Two big motors for drive and two medium motors for blade and ripper. Plus the usual mix of achievements and game modes.
March 20, 20213 yr 6-port hub would be great, it could have the same form factor as the RI/Spike hub, eliminating the need for new moulds for casing and including a rechargeable battery. But that would make the existing C+ hub essentially pointless so I very much doubt anything like this will happen. So either it'll be like 8275, or maybe two hubs like in 42100 with some extra features.
March 20, 20213 yr 8 hours ago, Timorzelorzworz said: I guess we will see a new evolution of C+ here, the new 6-port hub like the Spike one where it is possible to store programs and scripts to run without smart device. Don't think so. That hub is reserved for Spike Prime and Mindstorms with a different coding approach.Â
March 21, 20213 yr 14 hours ago, I_Igor said: So probably 2 (smart?) hubs like on Liebherr 9800 In my opinion, there will be one HUB C + and four engines. Two driving motors. One engine controls the 4 step gearbox, the other drives functions. Transfer case similar to set 42114. Will drive four functions. Blade (lift and tilt) and ripper (lift and tilt). TLG has a deviation at the point of gear boxes...
March 21, 20213 yr 1 minute ago, eric trax said: In my opinion, there will be one HUB C + and four engines. Two driving motors. One engine controls the 4 step gearbox, the other drives functions. Transfer case similar to set 42114. Will drive four functions. Blade (lift and tilt) and ripper (lift and tilt). TLG has a deviation at the point of gear boxes... you could be right also, imho there is a space for 2 hubs, but lets see...as you know I'm out of date and still use PFÂ
March 21, 20213 yr Unless the price changed away from 42100-level recently, I'm still betting that it's gonna have two hubs and six motors Edited March 21, 20213 yr by Bartybum
March 21, 20213 yr If I could have total wish fulfillment... Drive. Single XL-motor connected to purely mechanical 2-speed automatic, connected to differential with L motor for steering two tracks. Functions. 4-step gearbox for 4 functions; 1 motor driving, 1 motor controlling. If they could come up with some mechanical magic for more than 4 functions I'd be even more delighted. Size - as small as possible to fit in above mechanisms. new parts? Honestly not too fussed, although new parts to allow better gear boxes / transmissions would always get thumbs up! other fancy features? Really neat solutions to caterpillar track tensioning & suspension. TLDR: find a balance between motorization and mechanical complexity. I can dream... Edited March 21, 20213 yr by J159753
March 22, 20213 yr In the image of the Zetros, a slight glimpse of the CAT cabin can be spotted showing a yellow 9L liftarm as the roll cage. Using Sariel's scaler and a rather poor blueprint, the whole model should have a length of about 50 studs and a overall width of about 24 studs, tread-to-tread width is 17, with bigger treads maybe 19. The treads in the real model should be 4 studs, but will rather be 5 studs, using the bigger tread pieces.
March 25, 20213 yr @ace_klimax I have hidden your reply. Posting one picture here for referencing is okay, but let's not use this thread for showcasing our mocs/bricksafe/YT/rebricable links. Please make a new [MOC] topic in the Technic forum and show us your (indeed cool looking) bulldozer. Let's keep this thread primarily for the CAT. Thanks
March 25, 20213 yr Author I wonder if there'll be a mode like in 42114 with which you can set the tonnage, but this time being pushed by the blade.
March 25, 20213 yr Author 1 minute ago, Ngoc Nguyen said: I saw new responses so I expected candies. But no... Cheer up, old shoe. We've seen the roof!
March 25, 20213 yr 14 minutes ago, Ngoc Nguyen said: I saw new responses so I expected candies. But no... Candies are not good for your blood sugar levelÂ
March 27, 20213 yr Photo leaked. Very similar size to 8275. Completely yellow, black cage, bright light orange tracks. No pneumatics visible and no details on PU. Â
March 27, 20213 yr 1 minute ago, LvdH said: Photo leaked. Very similar size to 8275. Completely yellow, black cage, bright light orange tracks. No pneumatics visible and no details on PU.  This set is a frickin joke. I look at this photo and I do not believe it. I'm going to suffocate with laughter in a momentÂ
March 27, 20213 yr 20 minutes ago, eric trax said: This set is a frickin joke. I look at this photo and I do not believe it. I'm going to suffocate with laughter in a moment Your Liebherr is 1000 times more accurate and good lookingÂ
March 27, 20213 yr 25 minutes ago, eric trax said: This set is a frickin joke. I look at this photo and I do not believe it. I'm going to suffocate with laughter in a moment this looks like a first half flagship, not more. 2500 parts or less. hopefully this is a fake to confuse the copyguys
March 27, 20213 yr 1 minute ago, Akbalder said: The leaked price may be wrong for a set like this. It must be!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.