Kage Goomba Posted April 25, 2022 Posted April 25, 2022 I keep forgetting to mention - the sticker should say "Cloaking Device" It is the reason why this TIE is a Phantom TIE after all. :) Quote
Monkeyulize Posted May 16, 2022 Author Posted May 16, 2022 I guess it's true what they say about a MOC never being done... I wanted to try and extend the rear portion of each wing into the body more smoothly. As you can see above that is probably the most glaring difference in overall shaping. I'm pretty happy with the result: It required some internal changes which I'm hoping will be as strong as before. Quote
Kage Goomba Posted May 16, 2022 Posted May 16, 2022 42 minutes ago, Monkeyulize said: I guess it's true what they say about a MOC never being done... I wanted to try and extend the rear portion of each wing into the body more smoothly. As you can see above that is probably the most glaring difference in overall shaping. I'm pretty happy with the result: It required some internal changes which I'm hoping will be as strong as before. Just when you think you can't perfect it anymore - you go and do it again lol. I'm facing a similar challenge with my TIE Defender 3.0 variant - the TIE panels need some improvements. I may have to take the approach you did with your TIE Phantom in terms of the leading edge. But I need to build the bloody thing first so it will sit for now. :) Quote
Monkeyulize Posted June 20, 2022 Author Posted June 20, 2022 (edited) A few more improvements I felt were worth mentioning/posting. I finally removed the pentagonal tiles at the tips of each wing in favor of a full rail. This came with some more internal reconfiguring to have the same amount of clamping force but fully hidden. Also messed with the rear section some more, adding some shaping and even more details. I love how smooth that rear angle looks now: Edited July 11, 2022 by Monkeyulize Quote
Kage Goomba Posted June 20, 2022 Posted June 20, 2022 Starting to think I want to build one of these....it's so very sexy. Quote
Monkeyulize Posted June 24, 2022 Author Posted June 24, 2022 I'm pretty excited, I think I finally found a way to fit two minifigs in a mostly correct way while also retaining some details. I'm pretty sure this will work with bricks but won't know until I order a few pieces I don't have to build it and test but I don't see any collisions in studio. Quote
Monkeyulize Posted July 7, 2022 Author Posted July 7, 2022 (edited) I've tested the design and with a couple tweaks it works in bricks with no issues! It is a tight fit but nothing is being strained and with the right angles for the legs/arms the figs will fit. I have updated the instructions and parts list on Rebrickable. Also, I guess my MOC has finally "made it" -- a copy has shown up on AliExpress (NEW Star Plan Tie Phantom Fighter Interceptor Space Wars MOC Building Blocks DIY Toys Kids Gifts| | - AliExpress) Sucks for those who will buy it that it won't be the much more refined version that is currently available for free but eh. Edited July 7, 2022 by Monkeyulize Quote
Kage Goomba Posted July 7, 2022 Posted July 7, 2022 3 hours ago, Monkeyulize said: I've tested the design and with a couple tweaks it works in bricks with no issues! It is a tight fit but nothing is being strained and with the right angles for the legs/arms the figs will fit. I have updated the instructions and parts list on Rebrickable. Also, I guess my MOC has finally "made it" -- a copy has shown up on AliExpress (NEW Star Plan Tie Phantom Fighter Interceptor Space Wars MOC Building Blocks DIY Toys Kids Gifts| | - AliExpress) Sucks for those who will buy it that it won't be the much more refined version that is currently available for free but eh. Nice work Monkey. Looks great as ever. I just may go and build one. I forgot to ask - does yours sit on a stand or is it safe on its TIE panels? Quote
Monkeyulize Posted July 7, 2022 Author Posted July 7, 2022 1 minute ago, Kage Goomba said: Nice work Monkey. Looks great as ever. I just may go and build one. I forgot to ask - does yours sit on a stand or is it safe on its TIE panels? It sits on a stand although it could sit on the panels for a short while if you wanted -- they're pretty sturdy. There's instructions on the rebrickable page for the stand. Quote
Kage Goomba Posted July 7, 2022 Posted July 7, 2022 3 minutes ago, Monkeyulize said: It sits on a stand although it could sit on the panels for a short while if you wanted -- they're pretty sturdy. There's instructions on the rebrickable page for the stand. I'll have to look into that...still need to clean up my TIE/d - got a co-worker building one out so I'm eager to learn how it works out - although he may take a long time to get there - was hopping more would show up to help test the thing out lol. Quote
Monkeyulize Posted September 12, 2022 Author Posted September 12, 2022 Just a little update, I think I finally figured out what was bugging me about the proportions of the cockpit. It needed just a touch more length and I was able to reincorporate the macaroni pieces which look way better than the slope pieces I was using. This is also going to afford me some additional space in the cockpit to add detailing but I haven't figured out what I want to do there yet. Quote
Monkeyulize Posted January 5, 2023 Author Posted January 5, 2023 (edited) Back again with an update. I started off with trying a different technique for the engine heat spreaders which led me down a path of tweaking many things including the wing proportions, the wing-tip blasters, the entire rear section, the whole engine 'pod', and the greebling. Also a look at a landing pad I'm working on. Edited March 14, 2023 by Monkeyulize Quote
Shiva Posted January 7, 2023 Posted January 7, 2023 I, think that I like your version more, than the source materials that is available. Nice work :) Quote
Monkeyulize Posted May 30, 2023 Author Posted May 30, 2023 Reworked the rear section significantly. Also some internal stuff in the wings and some updated instructions that should hopefully result in a smoother build process. Quote
Veynom Posted May 30, 2023 Posted May 30, 2023 Very nice and your continuous improvements only make it better after each iteration. Thank you for sharing the instructions of this one. It is becoming higher and higher on my ToDo list. Quote
Monkeyulize Posted July 26, 2023 Author Posted July 26, 2023 (edited) Major update to the wings and some internal stuff for stronger connections. I can extremely confidently swoosh this thing around by holding on the rear or from the wings. The instructions also got an overhaul. I opened it as a new project on Rebrickable in case anyone wanted to purchase the version with all the improvements, otherwise the old version is still available for free. Edited July 27, 2023 by Monkeyulize Quote
Kage Goomba Posted July 27, 2023 Posted July 27, 2023 stop tempting me to add this to my collection dammit lmao. Quote
rde Posted August 3, 2023 Posted August 3, 2023 Holy cow, this is seriously amazing! Need to visit rebrickable.. , Good job!!! Quote
Monkeyulize Posted October 1, 2023 Author Posted October 1, 2023 I made a video overview of this model showing handling and highlighting some of my favorite bits. Give it a like if you wouldn't mind, I'm dipping my toes into the youtube space. Also my camera kinda of just crapped the bed after I filmed this so that's fun. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.