MaximillianRebo Posted September 21, 2022 Posted September 21, 2022 (edited) Inspired by other builders on Eurobricks, I've created my own set of Kenner Mini-rigs. These were non-canon toys from the 1980s that were designed to fit into the Star Wars universe but never appeared on screen (although a few have made their way into various media since then). INT-4 Interceptor A figure can fit inside through a hatch in the roof and the wings do fold out. The INT-4 was a repulsorlift scouting vehcile used by the Empire. The short range flyer is operated by a single pilot and can be carried inside the body of an AT-AT. CAP-2 Captivator This was my first attempt at 'upside down' building. Bossk (or any other fig) can fit fully inside the cockpit, I just have it open to avoid reflections in the photo. The CAP-2 is a model of walker used by the Empire and bounty hunters. Two mechanical arms extend from the front of the vehicle with a blaster cannon mounted between them and a large mechanism on the back hold prisoners for transport. MLC-3 Mobile Laser Cannon I managed to fit wheels underneath the build to allow for easy movement and the cannons have a limited range of motion. The MLC-3 light thank is a type of self-propelled artillery mounted on a motorized, tracked chassis, used by the Rebels on Hoth. Desert Sail Skiff A small, open-air, repulsorlift utility vehicle. The sail skiffs are smaller in size than the regular skiffs seen in ROTJ and were designed to be used as one-man personal fliers. Endor Forest Ranger This build is based on a design by @jamie75, I made a recolour of his cockpit design and changed the wing design. The wings are capable of rotating through a full 360 degrees and the landing gear folds up. Unfortunately I don't have an Endor trooper to use to show scale, so here's Jedi Luke. This is a repulsorlift vehicle used by the Rebels on Endor. With its unique gravity-controlled cockpit capable of supporting a single pilot, the vehicle was designed for manoeuvring through the forests of Endor. The vehicle had two gyroscopic wings and a large blaster cannon on each side MTV-7 Mobile Terrain Vehicle This model is largely a rebuild of an existing MOC by @jere7my with minor adjustments. I really like how he used the technic rubber axle connectors to allow for the wheels to pivot from the body. The MTV-7 is a single tracked, double wheeled ground car used by the Empire to scout planetary terrain, in particular on Hoth. Family photo And finally a bonus round... Imperial Sniper This wasn't produced as part of the Mini-Rig line, but rather from Kenner's line of Body-rigs - similar non-canon toys on a built on a smaller scale to the mini-rigs. The Imperial Sniper is a repulsorlift craft piloted by one person. It features a large open seat, two blaster cannons, and a grappling claw. Edited April 19, 2024 by MaximillianRebo Quote
TeddytheSpoon Posted September 21, 2022 Posted September 21, 2022 These are great, a bit like oversized microfighters. I'm not overly familiar with the Kenner toys but you've captured their 'Kenner-iness' perfectly! Quote
jamie75 Posted September 21, 2022 Posted September 21, 2022 Wow, talk about taking me back. I designed these years ago with the intent of building them in real brick and never got around to it. Thanks for the nod! Glad my design inspired you! Thank again! Quote
Mandalorianknight Posted September 21, 2022 Posted September 21, 2022 Love them! You've really captured how goofy they look while still making them feel star wars. The difference between the proportions of a minifigure and action figure gets in the way a little bit (The MTV-7 feels a bit oversized, for example), but in general you've done a good job negating that. The INT-4 has to be my favorite, you've recreated the design so well. I made an MLC-3 as I think the first MOC I ever posted here (albiet based on the "canon" force arena design), and this really takes me back. Quote
Feuer Zug Posted September 22, 2022 Posted September 22, 2022 Wicked collection. The small size makes them perfect for filling out scenes or playing with. Quote
Yperio_Bricks Posted September 22, 2022 Posted September 22, 2022 I never heared about the Kenner Mini-Rigs, so i had to look them up. The vehicles look weird but they have something that makes them very catchy imo. You captured the look very well! I like all your vehicle mocs but the INT-4 and MLC-3 are my favorites Quote
obijon Posted September 23, 2022 Posted September 23, 2022 Excellent work. Ah memories, I had the INT-4 toy as a kid and you have nailed it. I also had the ISP-6 (Imperial Shuttle Pod) which seems to be missing from your collection.................... Quote
The Stud Posted September 23, 2022 Posted September 23, 2022 I love these, great job! I'd love it if we could get some versions of these vehicles in battle packs over whatever random, generic vehicles they make for those. Quote
MaximillianRebo Posted October 9, 2022 Author Posted October 9, 2022 Thanks everyone for your comments! @TeddytheSpoon These were kind of the microfighters of their day - something from the Star Wars universe at a lower price point than the bigger, more detailed ships (although sadly with figures not included). @jamie75 I should have mentioned how great your cabin design for the Forest Ranger is; it works so well and perfectly captures in Lego the roundness of that section. @Mandalorianknight I agree the MTV-7 is a bit tall. I tried to make the wheel struts shorter but that would have meant using much smaller tires. Thinning down the top section and putting it on a regular 2x2 turntable makes the vehicle a brick shorter; still not to scale, but not as tall as before. @obijon I had a look at the Imperial shuttle Pod but didn't get around to designing one. There's a few other mini-rigs I haven't attempted so hopefully one day. Quote
MaximillianRebo Posted April 19, 2024 Author Posted April 19, 2024 (edited) I recently added to my collection of Kenner Mini-rigs with two Body-rig MOCS. The body-rigs were a sub-line of the mini-rig collection; smaller vehicles with space for a pilot and not much else. As with the mini-rigs they are all non-canon, although several have appeared in Star Wars EU media. Security Scout A one person vehicle with tan and green camouflage, the Security Scout was designed to soar above the forests of Endor as a companion vehicle to the Forest Ranger mini-rig. Sand Skimmer Another small one person hovercraft, similar in design to the Desert Sail Skiff mini-rig, presumably used by Jabba's minions to travel the sands of Tatooine and elsewhere. Here's a photo with the Imperial Sniper from a while back, rounding out the range of body rigs. Instructions: https://rebrickable.com/users/MaximillianBricks/mocs/?tag=46593 Edited April 19, 2024 by MaximillianRebo Quote
Yperio_Bricks Posted April 22, 2024 Posted April 22, 2024 Nice additions to the series Love the sand skimmer with the red sail! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.