mgetz Posted October 10, 2023 Posted October 10, 2023 Should I order two of the 6 packs of the minifgure series ? or am I better off ordering one then pickingnup individual packs?
JohnTPT17 Posted October 10, 2023 Posted October 10, 2023 17 minutes ago, mgetz said: Should I order two of the 6 packs of the minifgure series ? or am I better off ordering one then pickingnup individual packs? If you want all of them, I would just get them on Bricklink. The cheapest set in the US that I can find, including shipping, is $62.50, not including sales tax. Then, there's no risk involved, and you don't have to worry about paying for duplicates/putting in the mental effort to hunt them down.
Thwip Posted October 10, 2023 Posted October 10, 2023 51 minutes ago, Murdoch17 said: Just a thought: The curled squirrel tail used by Marshal in set 77048 from the Animal Crossing theme is just begging to be recolored for the Unbeatable Squirrel Girl. If not used in an outright official figure, at least recolor it so it's usable for building custom figs of her, Lego! Yeah that piece would work great! I made a custom squirrel girl using the rocket raccoon tail but it is just too small
Legocentrico Posted October 10, 2023 Posted October 10, 2023 In addition to my complete box I bought more than 30 single cmf and I still haven't found Moonknight >___< I have a doubt: Hoopty is lego exclusive? How long before I find it on sale on Amazon? :-p
squiz18 Posted October 10, 2023 Posted October 10, 2023 1 hour ago, Legocentrico said: I have a doubt: Hoopty is lego exclusive? How long before I find it on sale on Amazon? :-p It will be discounted on lego.com at some point. There are quite a few deals on at the moment (quinjet is 25% off and some black panther sets are reduced too). At least in the UK.
Lego Nostalgia Posted October 11, 2023 Posted October 11, 2023 Could Lego 76283 be the X-Mansion ? Falconfan posted a picture of wolverine with a caption of Lego 76283 a month or so ago so could that be a hint ?
LegendaryArticuno Posted October 11, 2023 Posted October 11, 2023 On 10/9/2023 at 11:26 AM, Legocentrico said: Those are the damages reported in the final battle of Iron Man 2 (there are also statues with those exact dents). It'll be a huge disappointment if LEGO doesn't include a damaged print on the helmet/mask to go with the damaged chest.
Legocentrico Posted October 11, 2023 Posted October 11, 2023 11 minuti fa, LegendaryArticuno ha detto: Sarà una grande delusione se LEGO non include una stampa danneggiata sul casco/maschera per andare con il petto danneggiato. oh my god, I don't even want to think that I don't have it :-0
cosmic Posted October 11, 2023 Posted October 11, 2023 On 10/7/2023 at 1:04 AM, THELEGOBATMAN said: This set will truly be incredible. They aren't holding back with it in any way. Can't wait to see it. It will probably end up as one of the most packed LEGO sets ever. Eh, I’d say they held back on arm printing for Falcon, Iron Man and Wasp based on the leaks. Considering we just got a $100 Avengers Quinjet, I wonder what design of jet we’ll get in the tower. I personally hope they opt for a smaller build like the AoU or Civil War Quinjets. I also hope the Tower has a landing pad that can hold the Quinjet. I get that the Levithan and the Quinjet sound like fun side builds, but a good leviathan could easily be $150 of a set on its own and we just got a Quinjet worth $100, so for both of these to be side builds is cool and all, but I hope it does not detract from the bulk of the actual tower. I just hope the landing pad is there, because with side builds so large there is a chance we see a compromise on the building itself which I hope is not the case.
LegendaryArticuno Posted October 11, 2023 Posted October 11, 2023 (edited) Rather than have a subpar Quinjet as a sidebuild, I'd rather they spend the parts budget on transparent technic beams (new piece) so you can integrate the recent Quinjet with Avenger's Tower. The Leviathan, I would want to see more before commenting but I wouldn't mind seeing built-in dmg, i.e. Ultron bursting out ala Green Goblin on one floor and Leviathan side swiping broken windows on another LOL Edited October 11, 2023 by LegendaryArticuno
CodFather1 Posted October 12, 2023 Posted October 12, 2023 8 hours ago, LegendaryArticuno said: Rather than have a subpar Quinjet as a sidebuild, I'd rather they spend the parts budget on transparent technic beams (new piece) so you can integrate the recent Quinjet with Avenger's Tower. The Leviathan, I would want to see more before commenting but I wouldn't mind seeing built-in dmg, i.e. Ultron bursting out ala Green Goblin on one floor and Leviathan side swiping broken windows on another LOL If they did this, I would want to see something where the explosion includes all of the parts necessary to build it intact, like with the Bugle.
Frizzlefry25 Posted October 12, 2023 Posted October 12, 2023 13 hours ago, cosmic said: Eh, I’d say they held back on arm printing for Falcon, Iron Man and Wasp based on the leaks. Considering we just got a $100 Avengers Quinjet, I wonder what design of jet we’ll get in the tower. I personally hope they opt for a smaller build like the AoU or Civil War Quinjets. I also hope the Tower has a landing pad that can hold the Quinjet. I get that the Levithan and the Quinjet sound like fun side builds, but a good leviathan could easily be $150 of a set on its own and we just got a Quinjet worth $100, so for both of these to be side builds is cool and all, but I hope it does not detract from the bulk of the actual tower. I just hope the landing pad is there, because with side builds so large there is a chance we see a compromise on the building itself which I hope is not the case. If the bulk really going to be the tower (which I hope) I would think the side builds for the quinjet and Leviathan would be something in the size of the cloud city cloud cars and slave I.
BrickBob Studpants Posted October 12, 2023 Posted October 12, 2023 (edited) 10 hours ago, LegendaryArticuno said: Rather than have a subpar Quinjet as a sidebuild, I'd rather they spend the parts budget on transparent technic beams (new piece) so you can integrate the recent Quinjet with Avenger's Tower. …do you have any idea how many parts it would require to hold a set like that without the support collapsing on the spot? I don‘t even know if this was feasible AT ALL, no matter how many parts you’d use Unless I have the wrong image in my head. You mean like the mini Tantive IV in the UCS Star Destroyer, just way larger, right? Edited October 12, 2023 by BrickBob Studpants
cosmic Posted October 12, 2023 Posted October 12, 2023 (edited) 35 minutes ago, BrickBob Studpants said: …do you have any idea how many parts it would require to hold a set like that without the support collapsing on the spot? I don‘t even know if this was feasible AT ALL, no matter how many parts you’d use Unless I have the wrong image in my head. You mean like the mini Tantive IV in the UCS Star Destroyer, just way larger, right? It’s gotta be physically possible! I mean they got it to work in the movies!! 🤣 So I wanted to revise the figure lineup for the upcoming X Men sets. This is how I think it should have gone. CMF Series 2 - Wolverine, Beast, Storm XJet - Magneto, Cyclops, Jean grey with red 2012 Black Widow hair, smiling/angry expression, Gambit X Mansion - Professor X in green suit and “concentrated” facial expression, Wolverine in biker gear/tank top, Beast in lab coat, Storm with no leg printing and the tussled hair in white, Cyclops, Jean in red ponytail and calm/shocked double sides expressions, Morph, Jubilee (with one of the BTS hair pieces), Magneto, Toad, Mystique with the jewel printed on her head and using Bo Katans newest hair piece, and Sabertooth. Edited October 12, 2023 by cosmic
Classic_Spaceman Posted October 12, 2023 Posted October 12, 2023 21 minutes ago, cosmic said: Jean grey with red 2012 Black Widow hair I think that Autumn’s hair (from Friends) would actually work for Jean.
Huigberts Builds Posted October 12, 2023 Posted October 12, 2023 I for one would love to see a mini quinjet. The Civil War airport battle was always my favourite version. Although it will have to be A LOT smaller to be able to fit nicely. The Slave-1 from cloud city comes to mind. As long as it can fit in at least 1 figure I'm happy. Although I hope the Leviathan is a bit bigger than in the Hulk Helicopter Rescue, that one really didn't look like it would destroy half New York.
Legocentrico Posted October 12, 2023 Posted October 12, 2023 In my opinion, the quinjet will be small enough to land on the terrace, and all the alien vehicles are designed to give life to the tower (like the Goblin in the Bugle), so they will have to remain "hanging" somehow... so I doubt that the Leviathan is very big. I would definitely have preferred a standalone set with the missing avengers and a huge leviathan. Maybe sooner or later… ooohhh but these images are coming??????? :-)))
Huigberts Builds Posted October 12, 2023 Posted October 12, 2023 52 minutes ago, Legocentrico said: In my opinion, the quinjet will be small enough to land on the terrace, and all the alien vehicles are designed to give life to the tower (like the Goblin in the Bugle), so they will have to remain "hanging" somehow... so I doubt that the Leviathan is very big. I would definitely have preferred a standalone set with the missing avengers and a huge leviathan. Maybe sooner or later… ooohhh but these images are coming??????? :-))) I don't want the Leviathan to be very big either, just a bit bigger than the previous one, which was laughably small next to a regular helicopter. Preferably just big enough so you can cram a single figure inside rather than on top. But still small enough so you can hang it on the side of the building like the glider/debris and buggy. Like you said, designed to give life to the tower. We'll still get plenty of opportunities in the future for big, highly detailed versions of these vehicles, but this is the only chance to get the ones that will fit on and around the tower.
Legocentrico Posted October 12, 2023 Posted October 12, 2023 1 hour ago, Huigberts Builds said: I don't want the Leviathan to be very big either, just a bit bigger than the previous one, which was laughably small next to a regular helicopter. Preferably just big enough so you can cram a single figure inside rather than on top. But still small enough so you can hang it on the side of the building like the glider/debris and buggy. Like you said, designed to give life to the tower. We'll still get plenty of opportunities in the future for big, highly detailed versions of these vehicles, but this is the only chance to get the ones that will fit on and around the tower. Maybe they place him on the ground, to recreate the "I'm always angry" scene with Hulk. in that case he could be bigger
Lego_ofme Posted October 12, 2023 Posted October 12, 2023 Holy moly!! It’s huge. Love the building. Excited to see more detailed and the minifigs up close.
Chris10 Posted October 12, 2023 Posted October 12, 2023 (edited) I’m definitely not seeing 31 figures in that picture though, so assume there’s a fair few not shown also?! Edit: looking again, I’m pretty sure that’s Nick Fury in the Quinjet too. The best part is that it has an antenna so I should be able to remove it and make it fit on my shelf after all 😂 the leaked 90cm height is 2cm taller than I can fit! Edited October 12, 2023 by Chris10
psqidexslizer Posted October 12, 2023 Posted October 12, 2023 Are those curved transparent poles new or am I just oblivious? Either way, they lol great!
josh_a_123 Posted October 12, 2023 Posted October 12, 2023 (edited) is it just me or does Hulk's head look like it's turned slightly?? Cos he may have the new bigfig mold if my eyes don't deceive me Vision's head also looks to be printed on a green head Edited October 12, 2023 by josh_a_123
Recommended Posts