February 7, 20232 yr 1 hour ago, MEJ said: Hope I don't need more parts for the wheel arches mod In fact I used a lot of different parts, in order to rebuild the aspects of the current bodywork that conflict with the wheel arches.
February 7, 20232 yr On 1/14/2023 at 6:40 PM, LvdH said: Mindblowing build. This is on a whole another level compared to anything else in the market. The looks and functions go perfectly hand in hand. I would like to thank Tlego for allowing me to build this in advance, testing the instructions and the amazing build experience, some of the help along the way and the countless of hours that went into designing, redesigning and even improving the design months after it was finished. Haven't bought this yet but how do u change the colours on the bonnet to an italian flag colours?
February 7, 20232 yr 36 minutes ago, Ahbao1983 said: Haven't bought this yet but how do u change the colours on the bonnet to an italian flag colours? Using three of these which are black on the red model. One green, one white and one red.
February 8, 20232 yr On 2/7/2023 at 3:59 AM, LvdH said: What QA issues? They are intentional features. CaDA (hopefully) seems to be fixing them. At least the wheels. This car deserves (and needs) better wheels, and definitely not something chrome. Is that the wheels need to get licence from Ferrari also?
February 8, 20232 yr 22 hours ago, LvdH said: Using three of these which are black on the red model. One green, one white and one red. cheers mate
February 8, 20232 yr 1 hour ago, Island said: Is that the wheels need to get licence from Ferrari also? The whole model doesn't even have a license.
February 15, 20232 yr While build Cada's products, we have identified a problem in which the gearbox only operates up to 4 stages. First of all, I reorganized the gearbox based on the picture you released due to an urgent situation. Do you have any plans to disclose how to modify the gearbox? Edited February 15, 20232 yr by Seo-onDaddy
February 15, 20232 yr Author @Seo-onDaddy Yes there is a gearbox error in the building instructions. The gearbox on the right shown the picture is an old prototype and outdated. The left gearbox is super easy to fix and requires only a few extra basic parts. The set will be updated once we elliminate the errors and for those who bought a set from the first batch , I will share a tutorial on how to fix the car. Edited February 16, 20232 yr by T Lego
February 16, 20232 yr On 1/22/2023 at 2:18 AM, T Lego said: @YYin Hope this helps.: @T Lego - this is a beautiful example of engineering and design. I can't wait to build this MOC. I've been a little confused with all of the discussion in this thread, but where can I find the LEGO version of the instructions to purchase? Edited February 16, 20232 yr by zeropsi
February 17, 20232 yr Hello everyone. Hello Thijs. A sheet of stickers is included in the CADA kit. The original Ferrari logo has been changed. There is an "F" on the logo and no horse. Is there an alternative sticker set for the la Ferrari with the original Ferrari logo and the original lettering. As you can see in the photos of the la Ferrari prototype.
February 18, 20232 yr On 2/7/2023 at 11:02 AM, astyanax said: In fact I used a lot of different parts, in order to rebuild the aspects of the current bodywork that conflict with the wheel arches. Will you release some instructions on how to build it?
February 18, 20232 yr 9 minutes ago, KKO said: Will you release some instructions on how to build it? But my mods were done on a prototype nearly 1.5 years ago. I don't know what T-Lego or CaDA changed in the mean time -- the base model could differ arbitrarily for all I know. And I disassembled my LaFerrari months ago. So at this point, your modding efforts will be as good as mine...
February 19, 20232 yr If someone can share or ship me the instruction book I'll recreate the model in Studio.
February 20, 20232 yr Hello Thijs de Boer has added a link to his YouTube video. https://www.bricksafe.com/files/T_Antonie/cada-c61505-laferrari-fixesimprovements/Fixes C61505 V2.pdf Fixes for the Cada set. Do you have to replace these parts? Or can I build the model exactly according to the original instructions and kit from Cada. I ordered a kit from Afobrick last week. Does anyone of you have an exact list of the parts to be exchanged, including the article number (Lego). I am grateful for your help. Edited February 20, 20232 yr by Silverbird
February 20, 20232 yr 5 hours ago, Silverbird said: Hello Thijs de Boer has added a link to his YouTube video. https://www.bricksafe.com/files/T_Antonie/cada-c61505-laferrari-fixesimprovements/Fixes C61505 V2.pdf Fixes for the Cada set. Do you have to replace these parts? Or can I build the model exactly according to the original instructions and kit from Cada. I ordered a kit from Afobrick last week. Does anyone of you have an exact list of the parts to be exchanged, including the article number (Lego). I am grateful for your help. Nice find! I'm in the middle of building mine. Maybe I should hit pause until we learn more about these modifications and the parts needed.
February 20, 20232 yr They mostly seem to be very and common standard parts and some of them might even be extras included in the set. But here is a short list of parts I spotted: 1x black 6 long axle 1x LBG technic bush 1x black 2x4 L-shaped liftarm 2x red pin connector with axle 2x tan frictionless axle pin 2x black pin with pin hole 2x black 1x3 perpendicular connector 2x black round 1x1 plate with bar hole 1x red non-CaDA branded #13 panel 1x red non-CaDA branded #14 panel 2x red connector with 2 pins I may have missed something, but like I said most of these parts could be included as extras in the set. Edited February 20, 20232 yr by LvdH
February 20, 20232 yr 4 hours ago, LvdH said: They mostly seem to be very and common standard parts and some of them might even be extras included in the set. But here is a short list of parts I spotted: 1x black 6 long axle 1x LBG technic bush 1x black 2x4 L-shaped liftarm 2x red pin connector with axle 2x tan frictionless axle pin 2x black pin with pin hole 2x black 1x3 perpendicular connector 2x black round 1x1 plate with bar hole 1x red non-CaDA branded #13 panel 1x red non-CaDA branded #14 panel 2x red connector with 2 pins I may have missed something, but like I said most of these parts could be included as extras in the set. Just finished the MODs to the transmission. You also need a "T-liftarm" https://www.bricklink.com/v2/catalog/catalogitem.page?P=60484#T=C
February 21, 20232 yr Hope cada fixes this issue on their set, otherwise ain't gonna buy this one. Edited February 21, 20232 yr by Polarlicht
February 21, 20232 yr On 1/22/2023 at 1:18 AM, T Lego said: @YYin Hope this helps.: Am I the only one getting my butt kicked by this step? Even with the original designers input (above) my rear spoiler is bound up. Especially when I add the "side modules" to the rear bumper. I also can't get the spoiler to sit low enough when I add these parts. I've rebuilt this about 3 times thinking it was an issue on my end. I've scoured the internet for all the videos and pictures and can't find anything wrong with how I've built things... Any help would be greatly appreciated!
February 21, 20232 yr Author @blbills Sorry to hear about your struggles, however I have insufficient information to draw any conclusions. Most likely you have made a mistake anyway. For clarity, picture you quoted was not to fix anything related to the spoiler itself, but it was to simply show how it was built in my original design. With the subassembly in the CaDa set the engine cover is pushed up by one stud meaning it can't close nicely. Edited February 21, 20232 yr by T Lego
February 21, 20232 yr The problem is probably because of the differences between Cada (right) and Lego (left) Parts. The Cada part has an additional pinhole which takes to much space for T Lego's fix.
February 21, 20232 yr 28 minutes ago, Seph78 said: The problem is probably because of the differences between Cada (right) and Lego (left) Parts. The Cada part has an additional pinhole which takes to much space for T Lego's fix. Bingo!!! The second I removed these parts (labeled R5 and L6) @T Lego's fix worked like a charm. I guess now the question is to either replace these with TLG parts or try to come up with a separate fix using the CADA parts that addresses the original need of the rear hatch not closing fully... It seem like either way this is something I can address after the build is complete. I'm tempted to move on for now. Let me know if anyone else solves this in a creative way. Thanks!
February 21, 20232 yr Author 5 minutes ago, blbills said: Bingo!!! Nice, good to know! That perfectly explains why the R&D team changed that part of the build in the first place, too bad it created a new problem with the engine cover.... Back to the drawingboard to find new assembly fixing both issues. Any help is appreciated because, again, I don't have the cada model. Apologies for the inconvenience..
February 21, 20232 yr 3 hours ago, T Lego said: Nice, good to know! That perfectly explains why the R&D team changed that part of the build in the first place, too bad it created a new problem with the engine cover.... Back to the drawingboard to find new assembly fixing both issues. Any help is appreciated because, again, I don't have the cada model. Apologies for the inconvenience.. I'm going to focus on completing the build to see if there are any other glaring issues but I'm happy to give it a go after that!
February 22, 20232 yr On 2/15/2023 at 6:55 PM, T Lego said: @Seo-onDaddy Yes there is a gearbox error in the building instructions. The gearbox on the right shown the picture is an old prototype and outdated. The left gearbox is super easy to fix and requires only a few extra basic parts. The set will be updated once we elliminate the errors and for those who bought a set from the first batch , I will share a tutorial on how to fix the car. Thankyou!!!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.