Sentinel Posted April 5, 2023 Posted April 5, 2023 I have a v2 receiver that only works half the time, the light turns on sometimes when I wiggle the cord but doesn’t stay on. I opened it up but I didn’t see anything not connected. I have the same problem with some of the motors too. anybody know what might be wrong? Quote
dr_spock Posted April 5, 2023 Posted April 5, 2023 Sounds like broken wires if it works wiggle one way and not the other. Quote
2GodBDGlory Posted April 5, 2023 Posted April 5, 2023 10 hours ago, dr_spock said: Sounds like broken wires if it works wiggle one way and not the other. Yeah, that's happened to me with lots and lots of PF components. I've usually fixed it by opening it up, cutting out the part of the wire where it enters the device, and resoldering the shortened wire back up. It's harder with receivers, though, because they need 4 wires soldered to a PCB. Quote
Sentinel Posted April 7, 2023 Author Posted April 7, 2023 On 4/5/2023 at 7:00 AM, 2GodBDGlory said: Yeah, that's happened to me with lots and lots of PF components. I've usually fixed it by opening it up, cutting out the part of the wire where it enters the device, and resoldering the shortened wire back up. It's harder with receivers, though, because they need 4 wires soldered to a PCB. Yeah thanks I might try that Quote
Jude Posted April 7, 2023 Posted April 7, 2023 Do you use multiple IRs with same battery? I had this very strange problem, 3 IRs (1 with extension cable) connected to same AA battery box, only one IR was working. In this setup the V2 was bottom plug, V1 centre and extension top. I changed plug of the IR with extension wire to the bottom and then all IRs started to work. Quote
doug72 Posted April 7, 2023 Posted April 7, 2023 (edited) Before cutting wires, check out the contacts on the cable plug and PF rx are making contact with each other. Just ease out the contacts on the plug & PF Rx. and test. Its worked for me. Edited April 7, 2023 by doug72 Quote
Sentinel Posted April 9, 2023 Author Posted April 9, 2023 On 4/7/2023 at 12:45 AM, Jude said: Do you use multiple IRs with same battery? Not yet, I only have one On 4/7/2023 at 1:03 AM, doug72 said: Before cutting wires, check out the contacts on the cable plug and PF rx are making contact with each other. Just ease out the contacts on the plug & PF Rx. and test. Its worked for me. I will try this Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.