Bundalings Posted August 22, 2008 Posted August 22, 2008 Nobody saved them to their computer? There were some on Flickr a couple pages back. I'll go see if I can find them. ~Bunda
Bfahome Posted August 22, 2008 Posted August 22, 2008 (edited) I did, but I'm afraid to upload them anywhere. o_o K nvm listen to the bunneh. Edited August 22, 2008 by Bfahome
S-N Posted August 22, 2008 Posted August 22, 2008 Lolz, Bfahome joined too. My favorite Glatorian has to be Strakk, love the ice axe and sleekness.
Bfahome Posted August 22, 2008 Posted August 22, 2008 (edited) Honesty, I'm conflicted between Strakk and Vorox. Strakk: • ICCCEEEEE • Crystal-ish design • Axe • Body design :wub: Vorox: • COLOR <3 • FEETS <3 • Mask has JAWS?! 8D • Weapons And I absolutely LOVE the new hands… :wub: :wub: :wub: WAAAAAAAATE I SEE A GAME PIECE ON STRAKKY'S BACK :O :O :O :O Edited August 22, 2008 by Bfahome
Bundalings Posted August 22, 2008 Posted August 22, 2008 Lolz, Bfahome joined too. My favorite Glatorian has to be Strakk, love the ice axe and sleekness. Ditto. Even though I built the body and the chest flaps around... it's no good. I stuck one of those little pins with a stud in the hips and it was fine then. Easy fix, I guess. I love how these guys look so elemental, reminds me of the Slizers. Skrall: Well... he's short at least. XP Gresh: All the spikes give the appearance of jungle vines and such. Tarix: He's got a tube on his mouth... which is unfortunatly silver. But his weapons which are sweet and detailed have some trans on them. =D Strakk: Well, that's obvious. <3 Vorox: Scorpian>Desert>Stone. Malum: Little fire bunny ears. XD Bfa: Yah, gamepiece on Skrall and Vorox's feet as well. I guess it's on the others' backs. GAAAAAAAMES It seems we share the love for Strakk and Vorox. ~Bunda
Bfahome Posted August 22, 2008 Posted August 22, 2008 Ditto. Even though I built the body and the chest flaps around... it's no good. I stuck one of those little pins with a stud in the hips and it was fine then. Easy fix, I guess. I'm trying to do that too. Can you tell if it's a Piraka or Inika torso? I'm thinking Piraka, but I wanna be sure. Oh and yeah he looks like a total bad guy. ^__^
Bundalings Posted August 22, 2008 Posted August 22, 2008 (edited) I'm trying to do that too. Can you tell if it's a Piraka or Inika torso? I'm thinking Piraka, but I wanna be sure.Oh and yeah he looks like a total bad guy. ^__^ It's Inika. What is usually the back is facing towards the inside of the chest. And thank goodness, the only one that uses Piraka is Skrall, it's it's used uniquely. ^_^ ~Bunda Edit: Skrall's body is the only one I can't figure out. =/ Edited August 22, 2008 by Bundalings
Bfahome Posted August 22, 2008 Posted August 22, 2008 (edited) It's Inika. What is usually the back is facing towards the inside of the chest.And thank goodness, the only one that uses Piraka is Skrall, it's it's used uniquely. ^_^ ~Bunda Edit: Skrall's body is the only one I can't figure out. =/ Aha. Built it. :D Skrall looks like he's the same design but backwards, but it's too blurry to tell. :/ Wait, I think Strakk's armor is held in place by his head connector… :\ Edited August 22, 2008 by Bfahome
Bundalings Posted August 22, 2008 Posted August 22, 2008 Aha. Built it. :DSkrall looks like he's the same design but backwards, but it's too blurry to tell. :/ Wait, I think Strakk's armor is held in place by his head connector… :\ Ah! I think you're right. ~Bunda
The Alchemyst Posted August 23, 2008 Posted August 23, 2008 Aha. Built it. :DSkrall looks like he's the same design but backwards, but it's too blurry to tell. :/ Wait, I think Strakk's armor is held in place by his head connector… :\ Nope. It's held because of the little tab on the bottom of the Inika armor. The little tab hits the Metru hip and doesn't allow it do fully click onto the little bent beam .>_< Anyway, Vorox is so awesome. <3 [-The Alchemyst-]
Bfahome Posted August 23, 2008 Posted August 23, 2008 Nope. It's held because of the little tab on the bottom of the Inika armor. The little tab hits the Metru hip and doesn't allow it do fully click onto the little bent beam .>_< ur doin it wrong The little tab keeps it from fully opening, but if properly constructed it flops around some. The head connector would keep it from doing this.
Bundalings Posted August 23, 2008 Posted August 23, 2008 (edited) Yeah... you built it wrong, TA. ~Bunda EDIT: Actually, Bfa, I just built it the way you said and it strained the pieces. I don't think that's right either. So either it's loose or they include one of those pin/stud pieces to fix it. Edited August 23, 2008 by Bundalings
The Alchemyst Posted August 23, 2008 Posted August 23, 2008 (edited) ur doin it wrongThe little tab keeps it from fully opening, but if properly constructed it flops around some. The head connector would keep it from doing this. If you put it so that the top hole and the third from top for the Metru Hip are connected to the beam and so that the other side is attached to the middle of the Inika body, so that the head holding side is forward, either the Metru hip or the Inika body will not go all the way. But yes, the ball socket does stop it from moving one way, my mistake, I thought of it as opening out, not the obvious going into the body. XD But that doesn't mean there's the Metru hip won't connect all the way. No matter what I do, I can't get both the Inika and Metru hip to go in fully and cleanly, there's still some peg visible. Oh, and Strakk's side is now ugly. There's going to be an angle and the gray bent thing sticking out like a sore thumb. EDIT: I think you guys are misunderstanding me. =/ The Metru hip does go in, but it doesn't click in place all the way. There''s a small gap the width of a sheet of paper. [-The Alchemyst-] Edited August 23, 2008 by The Alchemyst
iLego94 Posted August 23, 2008 Posted August 23, 2008 Hey guys, I just got an answer from Greg about how mata nui could control the universe while in a coma. 2) Same way you can breathe and your heart can beat without you consciously causing it to happen -- there are aspects of the universe that are controlled automatically by Mata Nui Since your heart beating is just your body, this could make the Teridax takes over MN's body theory correct. ~iLego
Bfahome Posted August 23, 2008 Posted August 23, 2008 If you put it so that the top hole and the third from top for the Metru Hip are connected to the beam and so that the other side is attached to the middle of the Inika body, so that the head holding side is forward, either the Metru hip or the Inika body will not go all the way. But yes, the ball socket does stop it from moving one way, my mistake, I thought of it as opening out, not the obvious going into the body. XD But that doesn't mean there's the Metru hip won't connect all the way. No matter what I do, I can't get both the Inika and Metru hip to go in fully and cleanly, there's still some peg visible. Oh, and Strakk's side is now ugly. There's going to be an angle and the gray bent thing sticking out like a sore thumb. EDIT: I think you guys are misunderstanding me. =/ The Metru hip does go in, but it doesn't click in place all the way. There''s a small gap the width of a sheet of paper. [-The Alchemyst-] UR DOIN IT WRONG
Bundalings Posted August 23, 2008 Posted August 23, 2008 UR DOIN IT WRONG If you're saying that's right you're wrong. >_< Or maybe you're saying it's wrong? I'm lost. ~Bunda
Bfahome Posted August 23, 2008 Posted August 23, 2008 (edited) If you're saying that's right you're wrong. >_<Or maybe you're saying it's wrong? I'm lost. ~Bunda Whoops. I kept taking it apart and putting it back together to take out and put back in the little pin to hold the armor. Must've misbuilt it. fixed Edited August 23, 2008 by Bfahome
The Alchemyst Posted August 23, 2008 Posted August 23, 2008 UR DOIN IT WRONG NO U. The Inika chest is supposed to go all the way down, not the Metru Hip: Ta Da! I thought the head holder was supposed to face the front. That way both the head and chest don't wobble. Cause if we do it so that the INika chest is all the way down, but the head holder is facing back, then the head wobbles... And the Metru hip pin hole closest to the Inika armor doesn't go in all the way, still... If I ever get Skrall, I'm going to fix up the body using those pieces and get the best, whatever it may be. [-The Alchemyst-]
Bundalings Posted August 23, 2008 Posted August 23, 2008 (edited) Whoops. I kept taking it apart and putting it back together to take out and put back in the little pin to hold the armor. Must've misbuilt it. The back should slide down, so that the bottom stud is covering-ish the end of the hip. You have their placements backwards. Did you see my edit a few posts up? ~Bunda Edit: TA's got it. Well, the body. I dunno about the head. One way it wobbles, the other it strains, and Lego doesn't strain parts in their sets. Edited August 23, 2008 by Bundalings
Bfahome Posted August 23, 2008 Posted August 23, 2008 (edited) READ POSTS YOU N00B >:P @ Alchemyst >.> The back should slide down, so that the bottom stud is covering-ish the end of the hip. You have their placements backwards.Did you see my edit a few posts up? ~Bunda Edit: TA's got it. Well, the body. I dunno about the head. One way it wobbles, the other it strains, and Lego doesn't strain parts in their sets. I'm just guessing. :/ Edited August 23, 2008 by Bfahome
The Alchemyst Posted August 23, 2008 Posted August 23, 2008 I knew you'd do that. So I took a screen shot! >8D Anyway, Ball Socket/head hodler, facing forward seems the best thing to do. Then both the head and armor wouldn't move. [-The Alchemyst-]
Bundalings Posted August 23, 2008 Posted August 23, 2008 I knew you'd do that. So I took a screen shot! >8D Anyway, Ball Socket/head hodler, facing forward seems the best thing to do. Then both the head and armor wouldn't move. [-The Alchemyst-] Pic? I'm not getting what you mean. ~Bunda
Recommended Posts