SNIPE Posted December 28, 2023 Posted December 28, 2023 Hey all, Since we have a thread already regarding the unofficial conversions of C+ sets to PF, I thought I would create the opposite, - a thread to convert PF to the newer C+. The reason for doing this is because while PF will always have a big place in my heart, most of my PF components have seen better days, so I thought it woudl be useful for "modernize" the old sets such as 42043, 42042,42054, 52055, 42082, etc etc, and there's a lpt to do but thats OK. I will start by listing the PF sets from 2007 all the way to 2019 but first a little bit of executive info: The goal is to keep the sets as simular to the original as possible, incorperating these conversions into a MOD is probably best left for the sets dedicated "MODs thread". The use of WeDo, NXT, EV3, BOOST, Powered Up Spike Prime, Robot Inventor is OK as long as it has demonstrated exaustion , where there is no possible analogue to a given PF component. There must be a balance between keeping the set as original as possible, but where needed, certain PF parts will need to have "creative" solutions to get the same behaviour, and I think those should be mechanism oriented rather than software oriented as long as it does not change the set too much, but software based solutions can be used in more extreme circumstances. This thread is only for Technic sets that contain power functions, no other themes. This thread also covers technic sets with optional motorization. This thread also coveres B models that had official motorization Some examples of such parts may be IR recievers and remotes, the PF switch, the PF battery boxes where the switch is conneceted to technic beams to create an external on/off switch, etc. Now onto the set list: 8292 A model8292 B model8294 (with '8293 - PF addon kit') A model8295 (with '8293 - PF addon kit') A model8297 A model8297 B model8258 A model8258 B model8264 (with '8293 - PF addon kit') A model8264 (with '8293 - PF addon kit') B model8265 A model8264 A model8043 A model8043 B model8049 (with '8293 - PF addon kit') A model8052 (with '8293 - PF addon kit') A model8052 (with '8293 - PF addon kit') B model8053 (with '8293 - PF addon kit') A model8070 A model8109 A model8110 A model8110 B model9395 (with '8293 - PF addon kit') A model9396 A model9397 A model9397 B model9398 A model9398 B model41999 A model42000 (with '8293 - PF addon kit') A model42006 (with '8293 - PF addon kit') A model42008 A model42008 B model42009 A model42009 B model42024 (with '8293 - PF addon kit') A model42025 A model42025 B model42029 (with '8293 - PF addon kit') A model42030 A model42030 B model42038 (with '8293 - PF addon kit') A model42039 (with '8293- PF addon kit') A model42042 A model42042 B model42043 A model42043 B model42050 A model42052 A model42052 B model42053 (with '8293 - PF addon kit') A model42054 A model42054 B model42055 A model42055 B model42065 A model42065 B model42066 A model42066 B model42068 (with '8293 - PF addon kit') A model42070 A model42070 B model42080 (with '8293 - PF addon kit') A model42080 (with '8293- PF addon kit') B model42082 A model42082 B model42095 A model42095 B model Links to the replies which contain a digital model can be accessed by clicking 'A model' or 'B model' Replies can also just be to discuss stuff related to this threads topic. I'll start working on some of the models soon, when the LDRAW OMR is back online. I also need testers to build some of the real converted models to make sure they work. Quote
Ngoc Nguyen Posted December 28, 2023 Posted December 28, 2023 Putting PU components into PF sets is gonna be a huge task. The first difficulty that came to my mind is size. PU L motors are 8 studs long, while PF L motors are 7, and PF M motors are 6. The fact that PU motors are longer means when I put PF motors in, there is usually some space left for gearing down and clutch mechanisms without drastic changes to the surrounding structures. But putting PU motors in the space reserved for PF motors might require redesigns of surround structures, though. Quote
SNIPE Posted December 28, 2023 Author Posted December 28, 2023 25 minutes ago, Ngoc Nguyen said: Putting PU components into PF sets is gonna be a huge task. The first difficulty that came to my mind is size. PU L motors are 8 studs long, while PF L motors are 7, and PF M motors are 6. The fact that PU motors are longer means when I put PF motors in, there is usually some space left for gearing down and clutch mechanisms without drastic changes to the surrounding structures. But putting PU motors in the space reserved for PF motors might require redesigns of surround structures, though. Yeah, I agree but I'm gonna give it a shot Quote
SNIPE Posted January 5, 2024 Author Posted January 5, 2024 (edited) Took a break from building the Orient express and decided to start with 42070 chassis, I tried converting 8275 first but that one will be much harder. This chassis is almost done, will upload the digital file soon, not sure how I will make instructions. I used a C+ M motor (white) and a C+ XL motor. The only major change was that the steering rack is now in front of the wheels rather than behind. you'll need aound 10 common parts extra like axles and axle jointers. I'll use a C+ dumb batttery box in place of the PF battery box. I could upload the entire converted ldr model but it is based on @Philo's model, so idk if i'm allowed to share it or not. I'll leave the file author as philo since he did the hard work of making the model (I don't have anywhere near that much parience!) so as long as its OK with philo, Ill share the LDR file. Update 8/1/2024 Model amost finished, all functions working fine, This model can be driven via a phone running a suitable app, or via a powered up remote. The code for the powered up app I will need to make and then upload. Edited January 8, 2024 by SNIPE Quote
SNIPE Posted January 11, 2024 Author Posted January 11, 2024 (edited) 72070 DONE, access to the hub button is done thru the gap in the seats Here is the LDRAW model, since @Philo did most of it, I'll leave his name as the author as per the CCBY2 licence code PU app Controls are here, I still need to program it. It uses one C+ XL motor, one PU M motor, And one C+ smart hub You can use a PU remote, or a smart device to control it Not sure how the instructions will be made, perhaps someone else can help with that as it sounds too tedious for me. For my next set conversion I chose one of the smaller technic sets, So therefore I chose Big Red 🙂 Edited January 11, 2024 by SNIPE Quote
mdemerchant Posted January 12, 2024 Posted January 12, 2024 15 hours ago, SNIPE said: For my next set conversion I chose one of the smaller technic sets, So therefore I chose Big Red 🙂 Great choice but that's the one PU set I own so I don't need a conversion Although I did convert it to C+ full RC after I was done playing with my 42100. Unfortunately I don't have a complete design file for it or I would post it. Doing the conversion of the original set should be pretty straightforward, only one motor to deal with and it's got space. Now I feel like building Big Red again... such a good set. Quote
SNIPE Posted January 12, 2024 Author Posted January 12, 2024 9 hours ago, mdemerchant said: Great choice but that's the one PU set I own so I don't need a conversion Although I did convert it to C+ full RC after I was done playing with my 42100. Unfortunately I don't have a complete design file for it or I would post it. Doing the conversion of the original set should be pretty straightforward, only one motor to deal with and it's got space. Now I feel like building Big Red again... such a good set. Yeah, I've seen a couple of C+ full RC mods on rebrickable but oh well, its only single motor and theres 1L extra space behind it, which means that the C+ motor (which is 1L loner) should fit in fine. Trouble is I don't want to start building big red until ive made the 42070 instructions first so that I can dismantle 42070. I could just use the 42070 C+ LDR file which is already competed, as the guide for the instructions. Quote
howitzer Posted January 12, 2024 Posted January 12, 2024 On 12/28/2023 at 7:20 PM, Ngoc Nguyen said: Putting PU components into PF sets is gonna be a huge task. The first difficulty that came to my mind is size. PU L motors are 8 studs long, while PF L motors are 7, and PF M motors are 6. The fact that PU motors are longer means when I put PF motors in, there is usually some space left for gearing down and clutch mechanisms without drastic changes to the surrounding structures. But putting PU motors in the space reserved for PF motors might require redesigns of surround structures, though. Varies a lot depending on the set though. With something like 42055 you can just swap the motor and battery box with minimal modifications, though it might require two motors as PU XL motor isn't as powerful as PF XL. I believe many other single motor sets would be similarly easy, while sets with multiple motors (like 8285 or 9398) would be significantly harder. Full RC mod to non-RC sets is of course going to make things quite a bit harder, but that's not in the spirit of keeping them as close to original as possible. Quote
Philo Posted January 25, 2024 Posted January 25, 2024 On 1/5/2024 at 6:38 PM, SNIPE said: I could upload the entire converted ldr model but it is based on @Philo's model, so idk if i'm allowed to share it or not. I'll leave the file author as philo since he did the hard work of making the model (I don't have anywhere near that much parience!) so as long as its OK with philo, Ill share the LDR file. Better late answer than never ;) Feel free to share it or any similar work I did! Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.