February 15, 20241 yr 1 hour ago, 1gor said: Yes, because W14 had a pullrod suspension at the rear Yeah, and Lego released the W14 - so what is your point here?
February 15, 20241 yr 58 minutes ago, Bensch55 said: Yeah, and Lego released the W14 - so what is your point here? Point is that at least TLC is trying to replicate main features in this set
February 26, 20241 yr 3 minutes ago, 1gor said: Hm...this air intake above cockpit looks like fat botox lips Or the Orange mobile network commercials. :))
February 27, 20241 yr 7 hours ago, R0Sch said: Or the Orange mobile network commercials. :)) Actually I had old Buggs Bunny cartoons in mind, but you probably know better than me... I use compettitor mobile services...
February 27, 20241 yr 19 hours ago, R0Sch said: The new Batmobile :)) Source: techlug.fr Just wait until i get rid of the color vomit with black parts! (including rare/lagacy black parts)
February 27, 20241 yr 2 hours ago, SNIPE said: Just wait until i get rid of the color vomit with black parts! (including rare/lagacy black parts) Sure, I'll wait. Here's everything you need to replace. *grabs popcorn*
February 27, 2024Feb 27 So, I was just watching this RacingBrick video on this car: In it, he's talking about the way in which the steering wheel is misaligned, and uses this example to show that it can't be fixed naturally: I guess what I want to point out is that it is correct that the wheel can't ever be properly aligned, but at the same time, there is a way to build it that allows it to be significantly closer to center. Built like in that picture, the result is an offset of 22.5 degrees, but by misaligning the 12T gear by one tooth, we can make the axle offset by 30 degrees, and then counter-offset it with the 8T gears' -22.5 degrees, for a net offset of 7.5 degrees, like this: Does this check out? (Also, note that if the model was using a 16T pinion gear, it would be possible to offset it exactly 22.5 degrees to perfectly counteract the 8Ts 22.5 degrees. That's not possible here, though)
February 28, 2024Feb 28 @2GodBDGlory it is certainly possible and makes it slightly better, but it won't fix the issue in the first place, and the instructions never tell you to do this, so it's not a solution for an average builder. If you saw my previous video, the manual of 42171 actually shows the steering wheel being rotated while the wheels are centered.
February 28, 2024Feb 28 6 hours ago, kbalage said: @2GodBDGlory it is certainly possible and makes it slightly better, but it won't fix the issue in the first place, and the instructions never tell you to do this, so it's not a solution for an average builder. If you saw my previous video, the manual of 42171 actually shows the steering wheel being rotated while the wheels are centered. Yeah definitely! It could be an easy mod for any Eurobricks users who care about that sort of thing, though
March 3, 2024Mar 3 I have just ordered this and ulimately I am looking forward to trying the wheels and tyres on my 42141.If successful I will order some more.
March 20, 2024Mar 20 Almost 100% blacked out. I've been saving old black parts for years just for something like this. Only a few grey axles and half bushes are left along with a few grey parts that can't be seen or are not made in black.
March 20, 2024Mar 20 2 minutes ago, WR3KL3SS said: Almost 100% blacked out. I've been saving old black parts for years just for something like this. Only a few grey axles and half bushes are left along with a few grey parts that can't be seen or are not made in black. I notice the grey parts that are visible when the model is on 4 wheels more.
March 20, 2024Mar 20 15 minutes ago, williamyzfr1 said: I notice the grey parts that are visible when the model is on 4 wheels more. Yeah, I got as many as possible swapped. I'm ok with it like it is. Maybe some day in the future I'll take the time to find more black parts and rebuild it. Edited March 20, 2024Mar 20 by WR3KL3SS
March 21, 2024Mar 21 10 hours ago, mla2 said: Looks better Where did you get the printed tires from? I believe those are from the CADA F1, but I may be wrong
March 22, 2024Mar 22 15 hours ago, mla2 said: Looks better Where did you get the printed tires from? It's permanent vinyl decals cut with a cricut machine. The Pirelli logo letters are too small to peel and line up đŸ˜‚ so it's just the P. Same for the 44.
March 28, 2024Mar 28 On 3/20/2024 at 10:56 PM, WR3KL3SS said: Yeah, I got as many as possible swapped. I'm ok with it like it is. Maybe some day in the future I'll take the time to find more black parts and rebuild it. Like you I got rid of some but not all to avoid a complete rebuild. I now have a sizeable collection of Light Grey & DBG Lego pieces that were removed & replaced.
April 4, 2024Apr 4 On 2/27/2024 at 6:03 PM, R0Sch said: Sure, I'll wait. Here's everything you need to replace. *grabs popcorn* I think I burnt my F1 carđŸ™„ Larger phtos here    WIP photos here Now to put some disc brake wheel hubs on, which requires using the 42110/42125 wheels to counteract the 1L extra width that the disc brakes add However this does mean that the wheel hub caps stick out further...oh well. I also bought some black minifig microphones so I might be able to replace the LBG axle-ball joints with those, if not then I would need to use the belville microphones, which fit into a ball joint just fine I could also make it look better by using: Black 12 tooth tan gears Black 8 tooth gears (the old, non reinforced version) Black 3L axle with stud( but the DBG ones i used are not visible anyhow Black half bushes instead of black 2L thin beams More 5.5 black axles (I only had 3 or 5) More black 7L axles (I only had 3) but those are bloody expensive But I would have to do a bricklink parts order and I've already spent a lot on lego so.. Hope yall like it!   Edited April 4, 2024Apr 4 by SNIPE
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.