Jim Posted June 15, 2024 Posted June 15, 2024 TECHNIC 49.5 x 20 TIRE VEHICLE CONTEST - ENTRY TOPIC CONTEST INFORMATION More information about the contest can be found in the general discussion topic. WHAT DO I NEED TO ENTER? Please take a careful look at the rules before posting in this topic. Each participant is obliged to create a post in this entry topic. Posts need to follow the rules stated below. Posts not following the rules will be disqualified so please read them carefully. ENTRY POST The entry post in this topic needs to contain: Entry name Short summary of the functions. One or more images (max 4). You can have combined pictures (4 in 1) as long as the picture isn't bigger than 1024x1024. Embedded Youtube video (not mandatory) Link to the discussion topic IMPORTANT This topic should be used for entries only, so commenting is prohibited. Please use the general discussion topic for...well, general discussion on the contest, and individual discussion topics to comment on the individual entries.
Arioh Posted August 24, 2024 Posted August 24, 2024 Dune Basher Retro Functons: Front ndependent suspension, rear trailing arm suspension. I4 micro-styled engine with differential driven by rear wheels. HOG steering with working steering wheel. Opening trunk and hood. Bold retro see-thru design with simple but accurate detailing and color coding. Photos: Link to topic
2GodBDGlory Posted August 24, 2024 Posted August 24, 2024 Truck-Mounted Forklift Functions: HOG Rear-wheel steering Knob-operated front wheel 90 degree turning (Sideways drive mode) Knob-operated mast sliding (Forward and backward) Knob-operated mast lift Knob-operated mast tilt Knob-operated scissor-fork-extend mechanism Manual fork side-to-side sliding
Seasider Posted August 25, 2024 Posted August 25, 2024 (edited) 90’s Kei Truck Functions: HoG steering with moving wheel in the Cabin Opening Doors Switchable 4WD - switch in Cabin to select RWD or 4WD just like the real vehicles Fake 3 cylinder engine Front and Rear Differentials Tipping rear bed - controls on both side of the vehicle under bed Folding sides to the bed Edited August 25, 2024 by Seasider
msk6003 Posted August 25, 2024 Posted August 25, 2024 (edited) Concrete pump truck GBC Function Drive using spike medium / RI angular motor Steering using C+ L motor GBC using PF L motor Openable door Openable both side component door Extending outrigger and arm Edited August 25, 2024 by msk6003
paave Posted August 27, 2024 Posted August 27, 2024 Airport Stair Truck- Boom raise- Opening tailgate- Platform extension- Platform levering- Scissors stairs (always 90°)- Working outriggers- 4l-engine- Working steering wheel + HOG- Opening doors- Opening engine bay
steph77 Posted August 29, 2024 Posted August 29, 2024 Fire department all road / off road truck - 6-wheel drive- 2 front-wheel steering- Suspension on each axle via floating axles and panhardt bar- Opening hood and doors- Steering via HOH, rack-and-pinion transmission- Pneumatic function for unloading arm lifting- Pneumatic function for lifting mode selection. Choice between hooklift and dumper- Pneumatic locking function for container-gripping hook- Container with wheels and opening doors vid: Link to the Topic
NV Lego technic Posted August 29, 2024 Posted August 29, 2024 4 hours ago, steph77 said: Fire department all road / off road truck - 6-wheel drive- 2 front-wheel steering- Suspension on each axle via floating axles and panhardt bar- Opening hood and doors- Steering via HOH, rack-and-pinion transmission- Pneumatic function for unloading arm lifting- Pneumatic function for lifting mode selection. Choice between hooklift and dumper- Pneumatic locking function for container-gripping hook- Container with wheels and opening doors vid: Link to the Topic That is really impressive, a lot of functions and good looks, too!
Jim Posted August 29, 2024 Author Posted August 29, 2024 1 hour ago, NV Lego technic said: That is really impressive, a lot of functions and good looks, too! Please don’t post replies in the entry topic.
Lixander Posted August 29, 2024 Posted August 29, 2024 (edited) Vintage baja buggy Features: steering through 1x PF servo; it can be replaced with a Geekservo; 1x PF L motor geared up to 1.67 for the rear-wheel drive; it can reach around 8-9 km/h / 5-6 mph with 1x MK 4.0 hub and 1x MK black L motor; a front assembly with positive caster angle; a suspension with a fairly long travel trough 4x hard 6.5L shocks with independent type in front and solid-axle type at rear; for a more realistic suspension behavior, soft shocks should also work; a detachable bodywork. Edited August 29, 2024 by Lixander
Timewhatistime Posted August 30, 2024 Posted August 30, 2024 (edited) Purple hook-lift truck The functions are operated manually: There are four black gears on the top of the cabin: 20 tooth gear, steering of front axle + rear axle (if not lifted; if the rear axle is liftes it is locked in middle posistion) + steering wheel) 12 tooth gear, left: liftable rear axle 12 tooth gear, right: extractable rear bumper 12 tooth gear, middle: long Linear Actuator for hook-lift function and dumping The red lever on the left side is for mode switching (hook-lift or dumping). The black 12 tooth gear at the front of the container controls the opening tailgate. Driving functions: The three beacons (two on top of the cabin and at one the rear) rotate while driving (generally, this is my favourite function which I do ever since I built MOCs within the last 35 years. Almost every MOC of mine has rotating warning lights :-) The fake engine (V 6) works while driving. Front PTO (right above the licence plate) Link to the discussion topic: [TC 27] Purple hook-lift truck - LEGO Technic, Mindstorms, Model Team and Scale Modeling - Eurobricks Forums Edited September 1, 2024 by Timewhatistime
Stereo Posted August 30, 2024 Posted August 30, 2024 Heavy Duty Forklift Features: - raise and lower forks by 20 studs with knob - tilt mast with knob - steering with knob as well as steering wheel, with Ackermann correction - 3 cylinder fake engine driving front wheels, located behind the cab - opening engine hatch and rear compartment - forks manually slide sideways to suit varying loads
Thirdwigg Posted August 31, 2024 Posted August 31, 2024 Crane Tipper Features: Steering RWD with I5 engine Three way tipper bed Three stage crane with grabber claws Dual outriggers
MangaNOID Posted September 1, 2024 Posted September 1, 2024 (edited) Multi Purpose Vehicle - Futuristic Vision Features Steering Suspension Extending chassis for loading 'stuff' 2 cylinder engine 4 wheel drive Adjustable steering wheel Rear crane Storage bins manual tipping tray Topic Link: Edited September 1, 2024 by MangaNOID
CrazyKreations Posted September 1, 2024 Posted September 1, 2024 (edited) Aussie Overlander Pickup Truck with Hybrid Camper Trailer Features of the Pickup Truck: Torsion bar suspension 4WD/AWD with (full-time locked differentials) Full RC, 1x L motor for drive and 1x M motor for steering Custom Tradie tray (Removable canopy + flatbed) Trundle drawer for Tradie tray 2 Large compartments in the Canopy 2 Small compartments for the flatbed A foldable tabletop is stored in the canopy. Many cosmetic features and interchangeable items to improve and change the look! Features of the Camper Trailer: Draw out table + Opening door, front chest and other compartments Interior. Space for an elevated bed and seats on the bottom floor. The camper has a 2 output gearbox that controls synchronized outtriggers + the pop-top roof Camper Tailgate doubles as steps into the trailer Spare wheels for both the Pickup truck and camper Slide out Awning Solid axle suspension with springs in the trailer Some Photos Edited September 3, 2024 by CrazyKreations Changed some words and photos
Wiseman_2 Posted September 1, 2024 Posted September 1, 2024 3-Axle Mobile Crane Functions: Steering on 1st and 3rd axle with proportional angle on 3rd axle, and working steering wheel in cab I6 engine driven by differential on 2nd axle, with 4 speed gearbox (gear shift stick located in cab) Full suspension on all 3 axles Simultaneous outrigger horizontal extension Simultaneous outrigger vertical deployment (capable of lifting crane off the ground when not horizontally extended, and stabilizing the crane for lifting when fully extended) Boom raising via XL LA 3-stage telescopic boom, with ratchet mechanism for locking, extending to a maximum reach of 108 studs/86.4cm, with vertical reach of 93cm Winch with ratchet lock 360 degree superstructure rotation Opening doors
Alex Ilea Posted September 1, 2024 Posted September 1, 2024 Crane Dump Truck Truck mode - 1st gearbox position -Working steering -Drive (rear 4 wheels) -Tipping bed Switching changes between the two modes and also deploys the stabilizing outriggers. Crane mode - 2nd gearbox position -Rotating turntable of the crane -Main crane elevation -Secondary crane elevation Extra functions:-Rear suspension on the 4 wheels-Working steering wheel-Working fake engine-Tilting cabin-Opening bed sides-Winch mounted to the crane-Opening doors YouTube Presentation: Discussion topic here:
CK28 Posted September 1, 2024 Posted September 1, 2024 (edited) Rotating telehandler 4 wheel steering Outriggers Rotating upperstructure Extending boom Tilting cabin Photos: Topic: Edited September 1, 2024 by CK28
Zerobricks Posted September 2, 2024 Posted September 2, 2024 (edited) Motorized lowrider Manual functions: Working steering actuated by the steering wheel Fake Inline 4 engine driven by rear axle Foldable roof (making it a convertible) Openable hood, suicidal doors and bonnet Motorized functions: 4x Independent spring - assisted motorized suspension on all wheels powered by 2x PU and 2x PF L motors All motors are controlled by a single BuWizz 3.0 located in the boot. Other features: Proper, clean and spacious interior Detailed exterior featuring winglets, exhausts, wheel covers mirrors and more Specifications: Built out of 912 pieces Weighs around 850 grams 40 x 14,5 x 11 cm when totally raised Edited September 2, 2024 by Zerobricks
Erik Leppen Posted September 2, 2024 Posted September 2, 2024 City bus Functions Front steering, via HOG on roof. Driver's steering wheel turns along. Rear wheels drives a 4-cylinder fake engine. 2-speed gearbox. Via HOG on roof. The gearstick by the driver's seat moves along. Opening/closing side doors, both connected, via HOG above the doors. Rolling destination panel with tiles on a chain, to allow choosing destinations. Via HOG on sides. Uses Architecture 1x8 tiles to visit monuments worldwide ;) Opening/closing rooftop windows. Both connected, via HOG on rear. Images Discussion topic
lmdesigner42 Posted September 2, 2024 Posted September 2, 2024 Aircraft Simulator Truck Functions: Remote-controlled drive and steering Remote-controlled aircraft pitch and roll with 2-way joystick Opening doors, tilting cab, storage compartment Various details such as seats, steering wheel, wipers, fuel tank, fire extinguisher, spare tire, etc. Video: Discussion topic:
JoKo Posted September 2, 2024 Posted September 2, 2024 Drift Kart and Driver RC Kart: Steering with exaggerated Ackermann geometry and 22° caster angle (PF servo) Rear wheels drive with two PF M motors geared up and no differential IR receiver disguised as a two-stroke liquid-cooled engine Driver: Uses battery box as body Articulated arms for steering and counter-steering Articulated head looking into corners /!\ No toggle joint piece has been harmed during final model assembly
Recommended Posts