1 hour ago, Michael217 said:

New information.  42205 "Chevrolet Corvette Stingray" 732 parts, 59.99 - I think the scale 42173

Hm, selling a Supra that needs two licenses (from Toyota and Universal Pictures) plus Inflation for 60 Money seems to be okay, if you're not living in a tent. But why is the Stingray that expensive too?

3 hours ago, Ngoc Nguyen said:

Omg this is really cute looking hopefully this will come to finland:) 

I really like these little Technic sets, polybags and magazine builds alike. They are great sparks for kids.

Another vette? It's probably the c8. Hope it looks better than the old one.

6 hours ago, Ngoc Nguyen said:

[picture of Pollybag]

I don't know, seems a lot like the Volvo loader ti me. I'll stil probably get it though 

 

6 hours ago, Ngoc Nguyen said:

And also i like this years space orange color on this model and the new color bucket piece

I like that TLG is keeping to the JCB/Volvo-style one-arm design.

That's reddish orange? I'm getting this 101%!

I don't have the tyres and shovel at hand.
I could not yet identify the lime part.

(build with bright orange. reddish orange for comparison)

 

 

51 minutes ago, anyUser said:

I could not yet identify the lime part.

Looks like a #1 connector (32013) and also the black 3x5 L is alternating holes kind, so a blue or tan axle-pin can connect them (and also the worm can go into it).  How close are you to the 52 pieces?

[edit] I thought it was 15100, but now I see it's 27940 pinhole with axles on both sides at the bottom rear of the cab, so it can connect to the alternating L with a regular 3L technic pin (2 pin, 1 axle)

Edited October 12, 2024Oct 12 by Stereo

1 hour ago, Stereo said:

Looks like a #1 connector (32013) and also the black 3x5 L is alternating holes kind

Thanks, that is very reasonable:

It'll allow for a brown axle with stop for the worm gear drive.

1 hour ago, Stereo said:

it).  How close are you to the 52 pieces?

from 1st and 3rd counting: I am at 47 parts.
+ 4 tyres
+ 1 shovel

= 52

Edited October 12, 2024Oct 12 by anyUser
3rd count

Nice selection of parts for a polybag.

The lime part is correct I believe. It's a 1 L liftarm in dbg.

 

What are the two grey axle parts going through the rear 5 L thin liftarms?

If they were simple grey 3 L axles, the colour choice would be a little bit weird. The other 3 L axles in this set are obviously yellow. (...which isn't a good decision in an orange vehicle...)

 

Edit: Ah, I see! These parts are the 3 L pinhole with axles in dbg!

Edited October 12, 2024Oct 12 by Timewhatistime

The completed model in stud io file is below.

https://bricksafe.com/files/kostq/wip/30710-2025-polybag-technic.io

Spent some time building it before seeing the thread - I was off only on the 5x3 L alternating beam.
48 out of 52 were visible/logical. The alternating beams are still new to me.

The 1 L liftarm (lime /  dbg) is a weird choice by TLG.

A 2 L liftarm could have connected the base (3 L orange liftarms) with the cabin for much more stabilty. One can feel how flimsy the cabin is by simply looking at it.

Edited October 12, 2024Oct 12 by Timewhatistime

5 minutes ago, Timewhatistime said:

The 1 L liftarm (lime /  dbg) is a weird choice by TLG.

 

3 hours ago, Stereo said:

Looks like a #1 connector (32013)

I have change the draft build from first picture to this. There is now a #1 connector 

23 hours ago, Oh_Hi_Mao said:

March wawe looks absurd, Technic went Racers 

And according to the latest information, 42203 is a dump truck =)

That skid-steer loader will come in paper (based) packaging, not a polybag. At least it still has some nice artwork. Hopefully not in the same shitty quality as the Blue Ocean paper bag prints.

5 hours ago, anyUser said:

 

I have change the draft build from first picture to this. There is now a #1 connector 

This makes sense and increases rigidity with the # 1 connector being attached to the 3x5 flip-flop beam.

42203 Tipping dump truck (462 pcs | $49.99)

Siurce: itavix_bricks on Instagram

 

I suppose it will be in the scale of the Mack garbage truck, but more expensive and with less functions.

Edited October 15, 2024Oct 15 by mpj

That seems a bit harsh for what it is.

31 minutes ago, mpj said:

42203 Tipping dump truck (462 pcs | $49.99)

Siurce: itavix_bricks on Instagram

 

I suppose it will be in the scale of the Mack garbage truck, but more expensive and with less functions.

Well im kind of exited of this set because the 8052 had 686 pieces so i have hope that this new dump truck is just small scale 8052

16 minutes ago, Auroralampinen said:

Ну, я немного расстроился из-за этого набора, потому что в 8052 было 686 деталей, так что я надеюсь, что этот новый самосвал будет просто уменьшенной версией 8052.

Hmm, it will probably be something like garbage truck 42167

Edited October 15, 2024Oct 15 by Ksen48

The new reddish orange recolors will be good for marcadees benz g500 mods (42177)

I can imagine this dump truck in the scale of 8415 and look of 42043. Of course without the crane 

Edited October 16, 2024Oct 16 by Jockos