Posted August 3, 2024Aug 3 Hi eurobrickers, This is my Ferrari 12Cilindri, which is a B-model alternate build of the 42143 Ferrari Daytona set. The model is built exclusively with the parts from the Daytona set, so no additional parts are needed, and it is in 1:8 scale. Features: -suspension -steering -opening doors and hood -working steering wheel -V12 engine -8 speeds paddle sequential gearbox This model uses 3200 parts, and besides the car, I built a display stand which allows the model to be displayed without the wheels touching the ground. Weight: 2505 gr/88.4 Oz Length: 54 cm/20.5 in Width (with mirrors): 26 cm/10.23 in Height: 15 cm/5.9 in Talking about the design process, I have started as I usually do, nowadays, in studio. I imported photos of the car, as it was a new release at the time of building it, and no actual blueprints were released. I started with the front axle, and with the gearbox. It all went straight forward, as it isn't something that hard to build. Then I continued with the rear axle, which is joined to the front one with the help of a strong center tunnel. Using the 3x19 frames helped to make the middle as rigid as possible. The shifter is very similar to the one found in the Daytona. I then built the dash (the #3 connectors in blue came in handy in order to make the dash look authentic next to the real thing) and the seats. After making sure everything works properly it was only a matter of trial and error in order to make the bodywork as accurate as possible. Is it 100% accurate? Well, of course not. But I am very pleased with the end result. I am proudly displaying it in my cabinet, next to my Porsche GT3 RS 42156 B-model and Toyota Supra MK4 -42154 B Model I have made a display stand for it, just for fun from the remaining parts: The wheels of the car are off the ground, so there will be no sagging in the future if displayed on the stand. A massive photo library with the model ->here Building instructions -> Here Please follow my Instagram for more about future projects and builds -> here Thanks everyone!
August 3, 2024Aug 3 I think a lot of B-models at this scale can suffer from the limited part selection, most of the time I think it’s obvious the designer had to make sacrifices in certain areas due to part availability. But this doesn’t give that vibe at all. Looks super clean and doesn’t look like you used a limited selection of parts at all. Even the interior looks quite nicely done. You somehow managed to keep the bodywork free of heaps of blue pins as well which is no easy feat and adds a lot to the look. If I had the SP3 I would definitely be giving this a build. After looking at the photos the only major improvement I would try to include is a way to keep the hood open. Did you try anything in that regard?
August 4, 2024Aug 4 Author 5 hours ago, langko said: I think a lot of B-models at this scale can suffer from the limited part selection, most of the time I think it’s obvious the designer had to make sacrifices in certain areas due to part availability. But this doesn’t give that vibe at all. Looks super clean and doesn’t look like you used a limited selection of parts at all. Even the interior looks quite nicely done. You somehow managed to keep the bodywork free of heaps of blue pins as well which is no easy feat and adds a lot to the look. If I had the SP3 I would definitely be giving this a build. After looking at the photos the only major improvement I would try to include is a way to keep the hood open. Did you try anything in that regard? That is indeed a big challenge every time. I also hate blue pins sticking out, they just ruin builds. I have learned that there is (most of the time) an alternate solution to avoid keeping them exposed. I wanted to add a manual hood prop shaft, but it kind of feels cheap. As an alternate, I wanted to make an autoblocking mechanism for "hood open position", but didn't manage to get anything relieable in. Thanks for the feedback langko!
August 4, 2024Aug 4 Phenomenal model, it looks very recognizable from most angles. I especially like how you mimicked the flow of lines on the bodywork in the rear and on the roof. The only part that could be improved in my opinion is the hood. The fenders of the original are a bit taller than the middle section of the hood, the vents are missing in your model and it would be nice if the hood was hinged in the front, as in the original. But of course this is a b-model, and there is always a little bit of compromise to be made. Overall great job!
August 4, 2024Aug 4 Author 12 hours ago, Paul B Technic said: Amazing, this really stands out. 8 hours ago, burak said: Phenomenal model, it looks very recognizable from most angles. I especially like how you mimicked the flow of lines on the bodywork in the rear and on the roof. The only part that could be improved in my opinion is the hood. The fenders of the original are a bit taller than the middle section of the hood, the vents are missing in your model and it would be nice if the hood was hinged in the front, as in the original. But of course this is a b-model, and there is always a little bit of compromise to be made. Overall great job! Thanks guys! Yeah, the front lacks those bulging arches, it makes it look a little flat, and the vent were loosely represented. I appreciate your feedback!
August 5, 2024Aug 5 Wonderful model perfectly recognizable! In the massive photo archive I finally saw the 12 cylinder engine!
August 6, 2024Aug 6 Hi all! It is, indeed a great MOC considering the limitations of being a B-model. Congrats, Alex! Cheers, Daniel
August 6, 2024Aug 6 Author 17 hours ago, LEGO Train 12 Volts said: Wonderful model perfectly recognizable! In the massive photo archive I finally saw the 12 cylinder engine! 2 hours ago, danieldf said: Hi all! It is, indeed a great MOC considering the limitations of being a B-model. Congrats, Alex! Cheers, Daniel Thanks guys! I quite like building with these part limitations. It forces you to be creative and innovative in different places.
August 12, 2024Aug 12 I have the 42143 sitting waiting to be built but I think I'll look out for another one so I can build your brilliant model. Thank you for posting and for making the instructions available 👍
August 12, 2024Aug 12 Author 9 hours ago, grum64 said: I have the 42143 sitting waiting to be built but I think I'll look out for another one so I can build your brilliant model. Thank you for posting and for making the instructions available 👍 Really appreciate that, have fun!
August 21, 2024Aug 21 On 8/4/2024 at 12:23 AM, Alex Ilea said: That is indeed a big challenge every time. I also hate blue pins sticking out, they just ruin builds. I have learned that there is (most of the time) an alternate solution to avoid keeping them exposed. I wanted to add a manual hood prop shaft, but it kind of feels cheap. As an alternate, I wanted to make an autoblocking mechanism for "hood open position", but didn't manage to get anything relieable in. Thanks for the feedback langko! Really liked the look and lines of this car. Have a spare set so I will be making this. Thanks for your hard work creating this car!
August 21, 2024Aug 21 Author 1 hour ago, AFOLegofan66 said: Really liked the look and lines of this car. Have a spare set so I will be making this. Thanks for your hard work creating this car! I also want to buy a spare set to keep this myself ;) Thanks!
August 22, 2024Aug 22 That's a real beauty, don't know if somebody already mate the statement but otherwise i will do so.. better looking than the original set...
August 23, 2024Aug 23 On 8/22/2024 at 6:21 PM, CK28 said: That's a real beauty, don't know if somebody already mate the statement but otherwise i will do so.. better looking than the original set... I agree, and have added a 2nd 82143 to my wishlist for this reason.... Ian...
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.