natelite Posted February 23, 2009 Posted February 23, 2009 Here's an unfortunate misprint... It was included in the X-wing set 6212. hmm, i dont see any misprint. what's wrong with it? Quote
Legoman Posted February 23, 2009 Posted February 23, 2009 I beleive the character with the most misprints in all of SW has been 1999-2000?(3?) stormtrooper. Yeah, the thing I don't really care about the clone faces, you can't see em'. However I do care about the helmets, because of the misprints, my younger brother and I have named all of them and can notify them faster than you can say...bkhujotfcgregutnjgik. :) JK I'm not surprised... Two years is a while hmm, i dont see any misprint. what's wrong with it? No eye's (i think) Quote
natelite Posted February 23, 2009 Posted February 23, 2009 No eye's (i think) all chewys are the same. i checked my stock and BL too. printing is only on the belt and nose. Quote
Commander_Rob Posted February 23, 2009 Posted February 23, 2009 I think what he is about with the Chewy fig is that the black nose dot might be a little too low so its more on the lip than nose. On the misprinted Clonetrooper heads: I think this problem arose with the new CW sets of this year. All Troopers I got from the first wave (AT-TE, Fighter Tank, V-19 and Spider Droid) are correct, all of these sets were bought during 2008. Yet all Clones from newer sets (RAS, AAT, Battlepacks) have misprinted faces, some looking to the left, some to the right. Quote
ditto Posted February 23, 2009 Posted February 23, 2009 On the misprinted Clonetrooper heads:I think this problem arose with the new CW sets of this year. All Troopers I got from the first wave (AT-TE, Fighter Tank, V-19 and Spider Droid) are correct, all of these sets were bought during 2008. Yet all Clones from newer sets (RAS, AAT, Battlepacks) have misprinted faces, some looking to the left, some to the right. hm.. this is interesting. i may have to check on my clones from both batches to see if this is the case for mine. could it be that the 2009 (or late 2008) batches were rushed out so less quality checks? Quote
CommanderCody77 Posted February 23, 2009 Posted February 23, 2009 hm.. this is interesting. i may have to check on my clones from both batches to see if this is the case for mine.could it be that the 2009 (or late 2008) batches were rushed out so less quality checks? I've seen that too. But some of mine are still not misprinted and I agree I think they were rushed Quote
Future74 Posted February 23, 2009 Posted February 23, 2009 Yes, my Ahsoka from Ahsokas Starfighter has smaller eyes. Very well spotted! It might be Ahsoka and Mace Windu are improved versions instead of misprints? I noticed that also. i have 8 left and rights. Weird. Maybe it's not a misprint if it comes up that regular. Maybe the battlepacks are suppose to include them. Edit: Also one of my reg clones has black smudges all over his helmet (AAT) Can you post up a picture? I think what he is about with the Chewy fig is that the black nose dot might be a little too low so its more on the lip than nose. Yes, it's printed under the nose, making it look like the mustache of a certain german dictator. Couldnt miss this one when it came in. I'll have to take another closer look at my minfigures to see if there's more like the clones and compare newer with older versions. Never really watched them that closely to be honest. Quote
CommanderCody77 Posted February 23, 2009 Posted February 23, 2009 One of my clones has some black smudges like Mocha said Quote
JCC1004 Posted March 7, 2009 Posted March 7, 2009 (edited) This post was in the wrong topic. Sorry, I moved it to the right one. Edited March 7, 2009 by JCC1004 Quote
Legoking Posted March 17, 2009 Posted March 17, 2009 Here is a misprint of Scout Troopers from set #7128, Speeder Bikes. I recently purchased this set unopened from ebay two summers ago. When I opened it, I noticed that one of the Scout Troopers torsos were faded. I was really disappointed. Well, here is the picture! You can see the Scout Trooper on the left is faded. I am not sure why though? LegoKing Quote
Ronan Nissen Posted March 17, 2009 Posted March 17, 2009 In my 1999 lightsaber duel, there are black smudges all over Qui-Gon's torso and there are white and dark red smudges on Darth Maul's face. Quote
Oky Posted March 17, 2009 Posted March 17, 2009 Poor trooper! He can't see anything. They must've run out of ink. This should be worth quite a bit! Quote
Commander Flash Posted March 17, 2009 Posted March 17, 2009 he could be any type of clone... Thats weird about the smudges. i've never got a displeasing lego misprint Quote
KimT Posted March 17, 2009 Author Posted March 17, 2009 Poor trooper! He can't see anything. They must've run out of ink. This should be worth quite a bit! I doubt that. This might be a misprint, but a lot of people are making loads of money by using brasso to remove the prints and then resell the parts as misprints. But I think that BL's buyers are becoming aware of this obvious fraud. Why would they run out of ink? It's probably more a question of an unprinted box of helmets being misplaced or the helmet slipping through the printing machine without being printed. Quote
Clone OPatra Posted March 17, 2009 Posted March 17, 2009 Here is a picture from my upcoming Gungan Sub review. It shows my Gungan sub Qui-Gun, who really messed up shaving. I have also seen a Qui-Gon who's eyebrows were too low which made him look really angry. But it was my friend's Qui-Gon, so I do not have pictures Quote
KimT Posted March 17, 2009 Author Posted March 17, 2009 Poor guy, must have had Jar Jar do the shaving :laugh: Quote
The Who Posted April 12, 2009 Posted April 12, 2009 Poor guy, must have had Jar Jar do the shaving :laugh: Now that's just mean.....Although he actually doesn't have any color in his eyes..... I'm sorry if this has been known, but I think the left-looking eyes on clones might be normal. I just bought Four more Clone Battle packs, and there was one left-looking head in each pack. Just seems too perfect... Also, one of the Clone Gunners had the gray stripes on his helmet too low, but I am not sure it is worth taking pictures of. Also sorry to 'dig up' this thread after a month. Quote
jifel Posted April 12, 2009 Posted April 12, 2009 (edited) My Clone BP is perfectly normal, but the Clone in the AAT I just bought is right-looking. jifel Edited April 12, 2009 by jifel Quote
CommanderFox Posted April 13, 2009 Posted April 13, 2009 OOOHHH!!! EXCITING ive had BAD printing on 7655 battle packs before but NEVER anything like NO Clone printing Im gonna check my CW clones and see if they have any miss prints like eyes to the left and eyes to the right then if I dom, I can charge more when I sell em CommanderFox Quote
Skipper 24 Posted April 13, 2009 Posted April 13, 2009 Here is a misprint of Scout Troopers from set #7128, Speeder Bikes. I recently purchased this set unopened from ebay two summers ago. When I opened it, I noticed that one of the Scout Troopers torsos were faded. I was really disappointed. Well, here is the picture! You can see the Scout Trooper on the left is faded. I am not sure why though? LegoKing I have some EPII clones from the original gunship which similarly have faded torso's. I have no recollection of them being out in the sun. When I get round to it I'll take a pic and post it up. Quote
Commander_Blitz Posted April 13, 2009 Posted April 13, 2009 My clone gunner's helmet printing is slightly lower than normal, as in everything is just a tiny bit (less than a millimetre) lower than it should be. Quote
legorevolution Posted April 13, 2009 Posted April 13, 2009 I think what he is about with the Chewy fig is that the black nose dot might be a little too low so its more on the lip than nose.On the misprinted Clonetrooper heads: I think this problem arose with the new CW sets of this year. All Troopers I got from the first wave (AT-TE, Fighter Tank, V-19 and Spider Droid) are correct, all of these sets were bought during 2008. Yet all Clones from newer sets (RAS, AAT, Battlepacks) have misprinted faces, some looking to the left, some to the right. hm.. this is interesting. i may have to check on my clones from both batches to see if this is the case for mine.could it be that the 2009 (or late 2008) batches were rushed out so less quality checks? The Clone's faces are not misprinted, unless the eyes are severely off and such. A huge purpose of the clone wars was to give clone troopers individuality- in choice, character, and appearance. TLG printed faces with eyes facing different directions as well as darker chins/cheeks so there is a better sense of individuality. I hope this helps explain a lot Quote
Legoking Posted April 13, 2009 Posted April 13, 2009 I have some EPII clones from the original gunship which similarly have faded torso's. I have no recollection of them being out in the sun. When I get round to it I'll take a pic and post it up. Same for you too? Well I have no idea why. When I just opened the "Speeder Bikes", they were faded. LegoKing Quote
CommanderCody77 Posted April 14, 2009 Posted April 14, 2009 I just got the AT-OT and Dropship and my Clone Pilots both are badly smudged! The first one has smudges and the other pilot had a grey line coming through his eyes! Quote
KinGanon Posted April 15, 2009 Posted April 15, 2009 Yes, my Ahsoka from Ahsokas Starfighter has smaller eyes.I scanned the figures. Ahsoka with white trousers has smaller eyes, with grey bigger eyes. Also AT-TE Ahsokas belt clip is orange, the new one is gold. Thats odd the Ahsoka I got from the AT-TE has a gold belt clip, not sure about the eyes though Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.