EdmanZA Posted October 24, 2013 Posted October 24, 2013 thank you very much for this helpful hint! is the u-joint disassembling riskless? Good hint for the CV-joints - i will check if they could be applied.... It's pretty fiddly and sometimes feels like you need three hands (all with tweezers for fingers), but the fiddliness also makes it difficult to apply enough force to break anything. I considered using CV joints on mine, but they have a lower range of angular motion than the universal joints. You'd have to do some modifications, moving the mounting points further apart to get them to fit. The back one might be possible, since there's a bit of space to play with at either end and any movement will reduce the shaft angle. I don't think you can replace the front one since, unless you use more than two joints, you can never get the angle below 45°. Quote
EdmanZA Posted October 24, 2013 Posted October 24, 2013 (edited) I've uploaded the complete pneumatic schematic with hose lengths. Bear in mind the lengths are approximate and are based on the specific cable routing I used. The total length is about 5.5m, so if you buy 6m or more of hose you should be fine. https://dl.dropboxusercontent.com/u/33170756/AG_5571_Tow%20Truck_Pneumatic_Schematic_final.pdf Edit 29-02-2020: Replaced Dropbox with Onedrive - https://1drv.ms/b/s!AvtTeyYHFWw9gotYXyUb2Ki9xOxKMw I didn't do a detailed study of wire lengths since I was limited to what I had available. It will definitely work with 2x 20L wires and 5x 36L, but you'll have to coil some of them. I think the absolute minimum wire lengths you could get away with is 5x 20L+, 2x 26L+. Edited February 29, 2020 by EdmanZA Replaced Dropbox with Onedrive link Quote
Kumbbl Posted October 24, 2013 Posted October 24, 2013 EdmanZA, thank you very much for your very valueable work! this will be very helpful for my own build of this truck! Quote
Junpei Posted October 24, 2013 Posted October 24, 2013 Should all of this be here? Look at the topic title... That tow truck is beautiful, wish I had the budget for it. Quote
Lundgren Posted November 22, 2013 Posted November 22, 2013 Today I finally got my hands on a 5571 set (and a 5542), according to Rebrickable I have about 60% of the parts needed to build Grazi's Tow Truck. So Bricklink here I come!!! :) Quote
Junpei Posted November 22, 2013 Posted November 22, 2013 Awesome! Wants to make me buy a 5571, but it's so expensive Quote
DrJB Posted November 24, 2013 Posted November 24, 2013 I 'missed' one a couple of weeks on eBay ... it was under $150!!! Quote
Lundgren Posted November 24, 2013 Posted November 24, 2013 I paid around 200 bucks for mine. (No box or instructions) maybe not the best price but it doesn't matter right now cause this one I only got to build Grazi's stunning tow truck! Quote
Kumbbl Posted November 24, 2013 Posted November 24, 2013 I paid around 200 bucks for mine. (No box or instructions) maybe not the best price but it doesn't matter right now cause this one I only got to build Grazi's stunning tow truck! better you buy two ;-) just buying 6 additional of this very rare wheels at bricklink will be very expensive... Quote
Lundgren Posted November 24, 2013 Posted November 24, 2013 (edited) Yes 2 had been good! :D But i have alot of parts laying around already, this weekend i have sorted them and put them on rebrickable so now I'm up on about 85% of the requiered parts to build it. The last 2 months I have spent over 4000 dollars on Lego so buying those expensive wheels doesn't feel so hard! :D Let's just say I'm out of my "dark age" ;) :D Edited November 24, 2013 by Lundgren Quote
Lundgren Posted November 27, 2013 Posted November 27, 2013 Having a bit of hard time finding good deals on rest of the parts, but i wont quit! :D Quote
Lundgren Posted November 27, 2013 Posted November 27, 2013 Dammit... ;) Wanna sell me some stuff? :) Quote
Junpei Posted November 27, 2013 Posted November 27, 2013 But that 8.1% probably consists of 5571 wheels, pneumatic cylinders, air tanks, and cylinder brackets Quote
Kumbbl Posted November 29, 2013 Posted November 29, 2013 (edited) No, i must disappoint you... I have all wheels, motors, pneumatics etc... 2 Sets 5571 and some 8868, 8455 and many others are really a very Good starting point ;-) Most of the remaining parts are bricks and design elements.... Ah, i forgot to mention my 10 cylinder brackets... You can make me an offering if you Need some... ;-) Edited November 29, 2013 by Kumbbl Quote
Lundgren Posted November 29, 2013 Posted November 29, 2013 I have no brackets at all :( Wanna sell me 4? Give me a pm! :) Quote
Technyk32231 Posted November 29, 2013 Posted November 29, 2013 Does anyone want to buy me a 5571 for Hannukah? Quote
jonwil Posted November 29, 2013 Posted November 29, 2013 This set has to be the most detailed truck TLG ever made. Wish LEGO would go back to sets this good (I am sure a highly detailed big-rig truck as a "Creator Expert" set would sell like hotcakes) Quote
Lundgren Posted November 29, 2013 Posted November 29, 2013 Indeed jonwill! I have tried "the new technic" trucks now but they can't compete with this! Not even close! I would defenetivly buy big high detailed sets! Quote
CisFran Posted November 29, 2013 Posted November 29, 2013 (edited) Just bought a few weeks ago an incomplete 5571 (missing the hood, fuel tanks and exhaust), but the tires are all there.....for $35.... I chanced upon this since the 2nd set of 5571 I won in the bidding was missing a tire.... so now I have 5 sets of extra wheels which I can use for future mods...BTW, I also built the model B, i'll post pics later Edited November 29, 2013 by CisFran Quote
peter_m Posted December 9, 2013 Posted December 9, 2013 Here someone sells white version of 5571: http://www.ebay.de/itm/Lego-Model-Team-5571-White-Cat-Truck-Sammler-Unikat-einmalig/171190190819?rt=nc&_trksid=p2047675.m1851&_trkparms=aid%3D222002%26algo%3DSIC.FIT%26ao%3D1%26asc%3D287%26meid%3D3265536479812452037%26pid%3D100005%26prg%3D1073%26rk%3D1%26rkt%3D5%26sd%3D171190202690%26 Quote
Lundgren Posted December 15, 2013 Posted December 15, 2013 The white one is awesome! First I couldn't figure out where the doors were from then I got it, (The Racing truck) :) Now I got more than 90% of the parts to build Grazi's Tow Truck so in the holidays the build will begin! I promise to take a lot of photos! ;) Quote
peter_m Posted December 15, 2013 Posted December 15, 2013 Has anyone tried to modify it to use modern PF elements? Quote
Lundgren Posted December 15, 2013 Posted December 15, 2013 I'm seriously thinking about it. We'll se what I will do? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.