europhobos Posted January 2, 2015 Posted January 2, 2015 (edited) Hello everyone, Frousmoul finally succeeded ! The instructions is now complete ! <snip> It is a 600 MO HD instruction ! 414 pages of fun to reproduce the famous UCS Venator ! <snip> The model is made out of 5421 parts. :) As usual, the price of the instruction is 5€. However, we all know that the instruction is worth more than 5€. Thus, you can give more if you think the instructions deserves more or if you want to support that kind of work offered to the Lego Community. To do a payment, you can PM me here, or e-mail me at setechnic[at]gmail[dot]com Payment by paypal or bank transfer. Thank you. edit : xml partlist for bricklink : http://www.techlug.f...s/partlists.zip Hallo! Hätte gerne die Bauanleitung vom Venator. Mit freundlichen Grüßen Martin Vincenz meine email: vintschenzo@yahoo.de Edited January 6, 2015 by MKJoshA Removed pictures Quote
Viceboy Posted January 27, 2015 Posted January 27, 2015 (edited) Hello everyone, Frousmoul finally succeeded ! The instructions is now complete ! <snip> It is a 600 MO HD instruction ! 414 pages of fun to reproduce the famous UCS Venator ! <snip> <snip> The model is made out of 5421 parts. :) As usual, the price of the instruction is 5€. However, we all know that the instruction is worth more than 5€. Thus, you can give more if you think the instructions deserves more or if you want to support that kind of work offered to the Lego Community. To do a payment, you can PM me here, or e-mail me at setechnic[at]gmail[dot]com Payment by paypal or bank transfer. Thank you. edit : xml partlist for bricklink : http://www.techlug.f...s/partlists.zip WOW Can i by the instruction manula.. yes i canna bild this.. wath a model... can you send me info to me dj_vice(at)hotmail.com NIIIIICE... from Tommy Edited January 28, 2015 by MKJoshA PLEASE don't quote pictures Quote
Azrielsc Posted January 28, 2015 Posted January 28, 2015 Just did a slight modification to the Venator once my Dark Red bricks came. Read about Obi-Wan Kenobi using Vigilance as his flagship during the final days of the Clone Wars and as a flagship, the twin bridges were painted red. So that was what I went for in this modification. I have not seen this mod done on Anio's Venator builds by others... but I may be wrong though. :) I also bought Obi-Wan Kenobi and a Clone Pilot to complete the "set". Hope you guys like it! Quote
Bbafett Posted January 28, 2015 Posted January 28, 2015 (edited) I'm actually not crazy out that mod. I like your idea and I have seen red bridges on the venator before but I just think it hides the bridge windows too much with all that dark. I love anio's the way it is and I am not sure it could be improved on very much. Edited January 28, 2015 by Bbafett Quote
elementx850 Posted January 28, 2015 Posted January 28, 2015 Being a big fan of the clone wars I love it. Great idea! It just made be want to watch all 5 and a half seasons of the Clone Wars lol. Personal I like it with out red but both look great! Its all preference. Keep the pictures rollin! Quote
elementx850 Posted January 29, 2015 Posted January 29, 2015 (edited) I did some more research and saw this piece: http://www.bricklink...Item.asp?P=2609 Would it be possible to pin one to a 2 X 4 technic plate to create a Magnet Holder Plate? http://www.bricklink...tem.asp?P=3709b If so which pin would be best? Thanks, Pat I found this would be the best way to go. The Magnet Holder Plate 2 x 2 Bottom is crazy over priced so I got this. http://www.bricklink.com/catalogItem.asp?P=2609 x 18 http://www.bricklink.com/catalogItem.asp?P=3709b x 36 http://www.bricklink.com/catalogItem.asp?P=4274 x 54 I will place two 3709b with the backs facing each other and then use three pins(4274) to hold them to gather. Then add 2609 to the top of one side This dropped the price from $300+ CAN to $4.88 with shipping. I will let you guys know how this works out for me. Edited January 29, 2015 by elementx850 Quote
Smekke Posted January 29, 2015 Posted January 29, 2015 This is my next project !!! After I finish my Slave I. How can I order the manual for this one ? @ I found this would be the best way to go. The Magnet Holder Plate 2 x 2 Bottom is crazy over priced so I got this. http://www.bricklink...Item.asp?P=2609 x 18 http://www.bricklink...tem.asp?P=3709b x 36 http://www.bricklink...Item.asp?P=4274 x 54 I will place two 3709b with the backs facing each other and then use three pins(4274) to hold them to gather. Then add 2609 to the top of one side This dropped the price from $300+ CAN to $4.88 with shipping. I will let you guys know how this works out for me. Can you make a sketch of your solution, I don't see how you can compensate the angel between the top and bottom pieces. Quote
Schneeds Posted January 29, 2015 Posted January 29, 2015 If that works it's going to put this in play for a lot of people. I would be sorely tempted. Quote
Rodion Posted January 29, 2015 Posted January 29, 2015 This is my next project !!! After I finish my Slave I. How can I order the manual for this one ? Please read this post: http://www.eurobricks.com/forum/index.php?showtopic=37663&st=150#entry1597460 Quote
Smekke Posted January 29, 2015 Posted January 29, 2015 Please read this post: http://www.eurobrick...50#entry1597460 I know, but i need 10 posts before I can send a PM Thnx anyway Quote
Anio Posted January 29, 2015 Author Posted January 29, 2015 Don't you see I also wrote an email I address ? T_T Quote
Smekke Posted January 30, 2015 Posted January 30, 2015 hmmm, must have been a sleepy day for me that I missed the email address E-mail send Quote
elementx850 Posted January 30, 2015 Posted January 30, 2015 This is my next project !!! After I finish my Slave I. How can I order the manual for this one ? @ Can you make a sketch of your solution, I don't see how you can compensate the angel between the top and bottom pieces. I will when I get home just at work ATM :D. Quote
elementx850 Posted January 30, 2015 Posted January 30, 2015 (edited) This is my next project !!! After I finish my Slave I. How can I order the manual for this one ? @ Can you make a sketch of your solution, I don't see how you can compensate the angel between the top and bottom pieces. Sorry I was wrong about having 3 pins per holder. you can only use 1 here are some screen shots http://i.imgur.com/JlApSgp.jpg http://i.imgur.com/ED2ghie.jpg http://i.imgur.com/ft59A33.jpg Edited January 30, 2015 by elementx850 Quote
Schneeds Posted January 31, 2015 Posted January 31, 2015 I haven't seen the instructions, but won't two extra plates worth of thickness throw off the fit off the hull? Quote
elementx850 Posted January 31, 2015 Posted January 31, 2015 (edited) I haven't seen the instructions, but won't two extra plates worth of thickness throw off the fit off the hull? If you look at the instructions you will see that you can take away 2 plates or add 1. It should all = out in the end. Edited January 31, 2015 by elementx850 Quote
cei Posted January 31, 2015 Posted January 31, 2015 I have not seen this mod done on Anio's Venator builds by others... but I may be wrong though. :) My Venator had red bridges as the flagship ;) It's been on my shelf for the best part of two years at this point. Quote
Schneeds Posted January 31, 2015 Posted January 31, 2015 If you look at the instructions you will see that you can take away 2 plates or add 1. It should all = out in the end. Then the question now becomes will one pin be strong enough! Hopefully. Quote
elementx850 Posted January 31, 2015 Posted January 31, 2015 Then the question now becomes will one pin be strong enough! Hopefully. Hahaha I hear that friend I will let you guys know once i have tried it out. Quote
H_Solo Posted February 1, 2015 Posted February 1, 2015 (edited) The model is made out of 5421 parts. :) As usual, the price of the instruction is 5€. However, we all know that the instruction is worth more than 5€. Thus, you can give more if you think the instructions deserves more or if you want to support that kind of work offered to the Lego Community. To do a payment, you can PM me here, or e-mail me at setechnic[at]gmail[dot]com Payment by paypal or bank transfer. Thank you. edit : xml partlist for bricklink : http://www.techlug.f...s/partlists.zip I wanted to check, where I stand costwise with this model, before ordering the instructions... So I downloaded the file, got a .zip-file with 15 separate .txt files in it... do I need to enter all 15 files into the Bricklink wanted list? Edited February 1, 2015 by H_Solo Quote
Anio Posted February 1, 2015 Author Posted February 1, 2015 I wanted to check, where I stand costwise with this model, before ordering the instructions... So I downloaded the file, got a .zip-file with 15 separate .txt files in it... do I need to enter all 15 files into the Bricklink wanted list? First, you just need txt ST04 for the Venator. As for your other questions : http://www.eurobricks.com/forum/index.php?showtopic=37663&st=250#entry1966929 Quote
Chewybricks Posted February 1, 2015 Posted February 1, 2015 Superb design. You have really outdone yourself Quote
Kristof Posted February 2, 2015 Posted February 2, 2015 This is my favorite version of Venator in UCS scale. I really admire original design by Thire5 (whos actually my fellow countryman which makes me proud :D) but you get a huge credit for allowing others to build it. I wish I can afford to build something this big one day. So far I have to focus on much lower scale while still struggling getting all the bricks :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.