Survey: New parts and new colors

[badgerboy]

5,6,9 and 10 definitely! I'd also add 18990 and any other sized domes they saw fit to add!

[jonwil]

I want the long whip antenna in trans-yellow.

 

[danth]

Yeah those are all good picks. I'm surprised you guys didn't include this one though. I've wanted that in trans yellow ever since it was on a Lego Movie poster with Benny. 

[Digger of Bricks]

I would like see a rounded corner brick with a two by two footprint and the height of one brick, which would be the smaller counterpart to part no. 88293 (pictured below on the left). Its slope would correspond to that of part no. 6091 (pictured below on the right).

  

On 10/16/2017 at 7:03 PM, danth said:

Yeah those are all good picks. I'm surprised you guys didn't include this one though. I've wanted that in trans yellow ever since it was on a Lego Movie poster with Benny. 

I have a few of those canopies, even one in Trans. Purple from a Year Two Ninjago set. For some reason though, I've never liked the design of that piece, even though I not sure why. It might just the length of it I'm not fond of, so perhaps a shorter version of that canopy might be more appealing. 

[Digger of Bricks]

I would like to see inverses of bow parts 29120 and 29119 (both pictured below), and maybe, a slope part that is a side-by-side fusion of those two into a single, pointed bow.

[Lasse D]

On 27/11/2017 at 5:11 PM, Digger of Bricks said:

I would like to see inverses of bow parts 29120 and 29119 (both pictured below), and maybe, a slope part that is a side-by-side fusion of those two into a single, pointed bow.

Or perhaps only with a stud underneath the 1x1 tile part so that the remainer can be made flush?

Right now I would be very happy to see this element in white. Then I can make a white LFA just like my black one.

[Digger of Bricks]

Here are a few requests that have been in the back of my head for awhile.

1. An inverse of slope part no. 85970.
2. Curved "macaroni" versions of parts 3045/3676 and 3675.
3. New bow parts that mirror the slope of canopy part no. 92474 in a similar fashion to the relationship between parts 46413 and 41749 (think of the X-Men vs The Sentinel set).
4. A few particular dual molded leg color combinations, which are (1) Bright Red with Black boots, (2) Bright Red with Dark Green boots, and (3) Earth Blue with Reddish Brown/Dark Brown boots.

On 12/5/2017 at 3:06 AM, Lasse D said:

Or perhaps only with a stud underneath the 1x1 tile part so that the remainer can be made flush?

Why of course, since you couldn't fit a stud onto that cut-off end anyway.

[jonwil]

+1 for red legs with black boots, that would be useful for giving Santa some proper boots (heck, they should do it for the next Santa fig they make and give it some printing or something)

 

[Steamdemon]

Part 24246 1/2 circle in Transparent red and regular transparent. Would give car builders and train builders some more options regarding headlight styles!

 

[jonwil]

I would love to see the "brick" pattern brick in white and reddish brown.

I also want to see the little bar clip piece (the one that has a standard rod attached to a clip that clips onto other standard rods) in white although I can't for the life of me remember why I wanted one...

The 4 x 4 round ring plate (with the 2 x 2 cutout in the middle) would be nice in blue, red, yellow and green.

 

[Digger of Bricks]

Here's a list of the of my most wanted Trans-Red windshield/canopy part recolors:

1. Nexo Knights windshield/canopy parts 22483, 27262, and 27165.
2. X-Wing canopy parts 21849 (minifigure scale) and 13252 (UCS scale).
3. Speed Champions canopy part no. 18973.
4. Bubble dome canopy part no. 85962 (from 2009's 8970 Robo Attack).
5. Sloped canopy/inverse cockpit pair 45705 and 47406.
6. Half cone parts 18909, 47543, and 29096.
7. Curved windshield part no. 62360.

On 12/28/2017 at 6:05 PM, jonwil said:

+1 for red legs with black boots, that would be useful for giving Santa some proper boots (heck, they should do it for the next Santa fig they make and give it some printing or something)

That's exactly who I had in mind with that color combination! 

On 1/1/2018 at 7:27 AM, Steamdemon said:

Part 24246 1/2 circle in Transparent red and regular transparent. Would give car builders and train builders some more options regarding headlight styles!

Brilliant idea!  

[Takanuinuva]

Is anyone else wishing for a version of this part but with the clip turned 90 degrees? 

[ZoulBrick]

Hello everyone

I posted a new topic there may be where I realized about 400 parts in prototype.
I add very regularly

Many of your requests are already done (like the last one from Takanuinuva)

I invite you to go see to avoid asking for a piece already made.

I will try to put the thread up, but you should know that with photoshop, I am limited, I need a base to edit (it's not 3D).

 

[ZoulBrick]

Hello everyone

I have just added 20 formatting (some ideas with requests from Eurobricks members).

I have 40 in advance under the elbow;) because I only display 20 per day so as not to drown all the information in the mass.

I started going up this thread since the last message and I am already on page 12.

A little reminder: I am going to present this file to LEGO with a sales idea about the new parts.

I think the more forms will be favorite/like and the more likely you are to be selected for.

I'll let you go see and hope you like it:

I remain open to any form proposal
thank you for your attention

QS: If you have your own 3D prototype or photoshop forms, you can come to group them in the Flickr group that I build.
It is a giant LEGO library with:
- Techniques
- Tutorials
- Prototype parts

https://www.flickr.com/groups/creatingnewbrick

 

 

 

[ZoulBrick]

Hello everyone

For your information, I am on page 9, about it below.

I just finished the hand drawn model, I start the second model present in LDD.


You can already see in my Flickr adbum all the modeling requested in the last pages of this topic.

I look forward to receiving your request for special pieces;)

 

 

[Digger of Bricks]

On 5/6/2017 at 7:32 AM, TAFOL said:

You mean like this part?

43721 Wedge 4x2 Sloped Left / 43720 Wedge 4x2 Sloped Right

Hey there! It's been awhile since the discussion of this proposal of mine, but I finally got around to producing a sketch of this idea. Here's my original description...

Quote

A type of piece at times I found would be useful would be slope versions of bricks like part no. 6565/6564 and 41768/41767 (both pictured below). They could have 1 by 2, 1 by 3, and even 1 by 4 slopes as opposed to a flat side on the side changing direction.  

...and here's the sketch!

 

[x105Black]

17 minutes ago, Digger of Bricks said:

Hey there! It's been awhile since the discussion of this proposal of mine, but I finally got around to producing a sketch of this idea. Here's my original description...

...and here's the sketch!

I could see these being very useful pieces as well.  Also, the inverse of these slopes would be nice.

[Digger of Bricks]

3 hours ago, x105Black said:

Also, the inverse of these slopes would be nice.

Indeed!  

[Anonknee Muss]

Part Name: Double-Barrelled Stud Shooter

Part Description: Exactly how it reads. For easier use it'll probably have one trigger but two studs so maybe a new trigger as I don't see the current one working in this concept.

Part Usage: More Playability and Functionality for younger children and AFOLS (like me) with child-like hearts . I really like stud shooters and the crossbow counterpart, why not new and exciting counterparts?

 

Part Name: Trigger for Double-Barrelled Stud Shooter

Part Description: It's a new trigger to fit in and make the new stud shooter function exactly as above.

Part Usage: To be used by people who would like a new stud shooter counterpart.

[ZoulBrick]

On 5/3/2018 at 5:59 PM, x105Black said:

....  Also, the inverse of these slopes would be nice. 

I do not know if I can realize the opposite, I will see to try to do it.

 

On 5/17/2018 at 10:06 PM, J4ck said:

Part Name: Double-Barrelled Stud Shooter

Part Description: Exactly how it reads. For easier use it'll probably have one trigger but two studs so maybe a new trigger as I don't see the current one working in this concept.

Part Usage: More Playability and Functionality for younger children and AFOLS (like me) with child-like hearts . I really like stud shooters and the crossbow counterpart, why not new and exciting counterparts?

 

Part Name: Trigger for Double-Barrelled Stud Shooter

Part Description: It's a new trigger to fit in and make the new stud shooter function exactly as above.

Part Usage: To be used by people who would like a new stud shooter counterpart. 

can you give me the references?

[Anonknee Muss]

5 hours ago, ZoulBrick said:

can you give me the references?

What do you mean?

[Grover]

A 75° double slope, with the slopes pointed inward, a la 3046a.

1x2 tile in trans green or trans dark green

Cut a new mold for the cypress trees!

[ZoulBrick]

On 6/15/2018 at 12:25 AM, J4ck said:

What do you mean? 

In fact I can not visualize your request
can you make a sketch ?

 

On 6/15/2018 at 10:12 AM, Grover said:

A 75° double slope, with the slopes pointed inward, a la 3046a.

1x2 tile in trans green or trans dark green

Cut a new mold for the cypress trees! 

I think I have already realized this request (or the following)

 

 

[Robin_IV]

Part 1:

- Part name: Slope 45 3 x 2 / 33 Left &  Right

- Part description: --> It's a slope corner piece which has a 45° slope on the 3 stud long side and a 33° angle on the 2 stud long side. It's actually this part down but cut in the middle between the two studs.

4861

- Part usage: --> I missed this part in my MOCs. It's important for corners where two sloped walls (one 45 and one 33) come together.

Part 2:

- Part name: Slope 45 3 x 2 / 33 Inverted Left &  Right

- Part descrition: Like part one but inverted.

[MxWinters]

4L friction pins and liftarms longer than 15L. Those are about the only parts I wish LEGO made.