Korni Posted February 9, 2013 Posted February 9, 2013 Yes, Pat, the doors are great! I like them, too. Quote
stefan_betula_pendula Posted February 9, 2013 Posted February 9, 2013 The doors are great and also the side tilting dump bed! Quote
Rishab N Posted February 11, 2013 Posted February 11, 2013 Has anyone made the cabin tilt by pneumatics? Also that's a nice red unimog! Quote
mike4slund Posted February 15, 2013 Posted February 15, 2013 Has anyone made the cabin tilt by pneumatics? Also that's a nice red unimog! yes, a few people have...it is shown somewhere in this thread. Quote
_techniclego55_ Posted February 15, 2013 Posted February 15, 2013 (edited) Has anyone made the cabin tilt by pneumatics? Also that's a nice red unimog! Yeah, efferman did.. 100_8793 von efferman auf Flickr 100_8794 von efferman auf Flickr Edited February 15, 2013 by _techniclego55_ Quote
radar92 Posted February 18, 2013 Posted February 18, 2013 Well I been busy trying different ideas. First an updated snow blower: It's version 3, 2 didn't even make pictures, based off a single action design I saw at Walmart, then found on YouTube. I just need new snow to test it. A trailer for the Unimogs Needs some works. A crane attachment and half-track unimog Both still need tweaking. Crane needs more counter weight, Half-track need air added. I couldn't find a real half-track unimog, so a what if. And finally some tools I'll currently working off the assumption of a 1:12 scale very rough. And that was my long weekend, save the half-track which I had already built. Quote
Pat-Ard Posted February 18, 2013 Posted February 18, 2013 Hi Radar92, I really like your trailer. Do you plan making instructions? Pat Quote
sapo117 Posted February 18, 2013 Posted February 18, 2013 One of the best MOCers should make the Arnold Schwarzenegger Unimog Quote
radar92 Posted February 18, 2013 Posted February 18, 2013 Hi Radar92, I really like your trailer. Do you plan making instructions? Pat No, I never got in to the whole digital stuff. I'd have to rip it apart to do that, plus the front end needs work(a lot). It's a version 1, a few bugs but proves the concept. It's really simple compared to most, 22 studs across, a double beam running 6 studs apart is the back bone. Mostly brick built save the axles, length was based off pictures and keeping it from bowing under load. When I make the changes to the front I take more pictures. Quote
Pat-Ard Posted February 19, 2013 Posted February 19, 2013 Never mind... It's really nice... Pat Quote
efferman Posted February 19, 2013 Posted February 19, 2013 (edited) One of the best MOCers should make the Arnold Schwarzenegger Unimog oh my goddess, they have made the mudguards wider than the tipperbed. was this the idea of Arni or of UNIKAT? Edited February 19, 2013 by efferman Quote
Eigenbroetler Posted February 20, 2013 Posted February 20, 2013 why is the wider mudguards a problem? it looks ok, and does the job. Quote
Edwin Korstanje Posted February 20, 2013 Posted February 20, 2013 (edited) The Schwarzenegger is like a gay version off it, the real strong Unimog is the Brabus Black Edition. Just Kidding Edited February 20, 2013 by VFracingteam Quote
Someonenamedjon Posted February 21, 2013 Posted February 21, 2013 A crane attachment and half-track unimog I don't really like the look of that cab after the improvement, but great job! Quote
efferman Posted February 21, 2013 Posted February 21, 2013 why is the wider mudguards a problem? it looks ok, and does the job. it is not fully possible to open the flatbedwall, so it doesnt do the job. VFracingteam, in my eyes the brabus is the gay version, because it looks ugly and its made for road. Arnies U1300 is made for offroad and with exception of the rollbars, cowbar and the too narrow flatbed, it looks great. Quote
radar92 Posted February 21, 2013 Posted February 21, 2013 (edited) I don't really like the look of that cab after the improvement, but great job! Which cab? the unimog, granted I was short on parts. The half-track was left-overs, cab based off my U20 design. The crane on the other hand does need more work. Is there some part of the cab, if it is the unimog, you didn't like? Edited February 21, 2013 by radar92 Quote
CisFran Posted February 22, 2013 Posted February 22, 2013 Somebody already posted the battery relocation to the flatbed to balance the weight of the 8110 but I can't seem to find it. Would any one kind enough to post the link or the page if that said pics is located on this topic? thanks! Quote
Someonenamedjon Posted February 22, 2013 Posted February 22, 2013 Which cab? the unimog, granted I was short on parts. The half-track was left-overs, cab based off my U20 design. The crane on the other hand does need more work. Is there some part of the cab, if it is the unimog, you didn't like? I did not really like the half track one because it was kinda small :P Quote
JSmith1717 Posted February 27, 2013 Posted February 27, 2013 So I have had mine for a couple of weeks, got it for Valentines day. So far I have done a couple mods my self, the first one is a 6x6 with a trailer for the crane, all crane movements still work, and I also rc it with the servo and 2 large motors. The second and how it currently is with rear air ride, waiting for more cylinders to do the rest, a dump bed, need another big cylinder for it, and going to order me a XL motor to redo the rc for it, it also has some extra caging on the front, and a custom made air tank for it. Quote
Pat-Ard Posted March 1, 2013 Posted March 1, 2013 Hi folks, today I finished my new spreader... And it's functional... I tried making a little clip... Special thanks go to Cypr-21 and stefan_betula_pendula for their inspirations. Hope you like it... https://dl.dropbox.c...og_spreader.MOV Pat Quote
stefan_betula_pendula Posted March 1, 2013 Posted March 1, 2013 (edited) Jesus, it works!!! Very well done, I love it! Edited March 1, 2013 by stefan_betula_pendula Quote
CisFran Posted March 1, 2013 Posted March 1, 2013 Hi folks, today I finished my new spreader... And it's functional... I tried making a little clip... Special thanks go to Cypr-21 and stefan_betula_pendula for their inspirations. Hope you like it... https://dl.dropbox.c...og_spreader.MOV Pat Hi, where did you buy those orange panels? from BL? S@H don't want to sell those Quote
Pat-Ard Posted March 1, 2013 Posted March 1, 2013 Thanks, stefan! @Francisalmario: I ordered them all at one shop at bricklink, price was OK and the shop had 10 if them. I tried it at Lego directly, hab a very nice phone call, but those panels are licensed. They are not allowed to sell them seperatly. Pat Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.