Gargi Posted March 1, 2013 Posted March 1, 2013 Hello, was kind of noob, and I have just read all 56 pages, so I am not a noob that much anymore. :D I would like to order the unimog right now, and I would like to make it fully RC. I don't have any engines and so... My first question is if there is engine for PTO and air system included, or if I need to order 3 engines. Second question - I already know that I need minimum one XL engine for driving, but what is better for steering? New servo-engine or just normal M size engine? And what type of controller I should buy? third - is there any reason of having two air pumps if I would like to have air tank? (because I would like to have more attachments in future not just original "hand" for example grass mowers in front etc... fifth - I saw somewhere that one guy had both PTO turned on in one time. Is there that possibility by stock? Because I would like to have snow blower in front and "stone or salt thrower" (I have no idea how to call it in english) in back... Thank you, I will buy and build it as soon as possible. Sorry for my english. Matej Quote
Pat-Ard Posted March 1, 2013 Posted March 1, 2013 Welcome Gargi to EB... Yes, this thread is quiet long... In the original set is one M-moter included, it runs the front end rear pto and operates the the pneumatic pump. I personally prefer the new servo motor for steering. In my Unimog I installed a second pump and an air tank. It's great. What's fourth? Didn't see this one, but with Lego nearly everything is possible. Have fun!!! Pat Quote
dr_spock Posted March 2, 2013 Posted March 2, 2013 Hi folks, today I finished my new spreader... And it's functional... I tried making a little clip... Special thanks go to Cypr-21 and stefan_betula_pendula for their inspirations. Hope you like it... Pat Nice work on the spreader. Now you have to build a sweeper attachment to clean up the mess. Quote
Rishab N Posted March 2, 2013 Posted March 2, 2013 Hi folks, today I finished my new spreader... And it's functional... I tried making a little clip... Special thanks go to Cypr-21 and stefan_betula_pendula for their inspirations. Hope you like it... https://dl.dropbox.c...og_spreader.MOV Pat I like this alot! are you going to make instructions? Quote
Pat-Ard Posted March 2, 2013 Posted March 2, 2013 Thanks again... Yes, a sweeper - have to think about it... No, I haven't git instructions, but a LDD Pat Quote
JunkstyleGio Posted March 2, 2013 Posted March 2, 2013 Orange panels licensed? That is strange: I've got mine directly from LegoDirect... Quote
Pat-Ard Posted March 2, 2013 Posted March 2, 2013 Yes, the call center agent said so. Lucky man!!! Quote
CisFran Posted March 3, 2013 Posted March 3, 2013 Yes, the call center agent said so. Lucky man!!! maybe the one how sold you was now suspended for selling you those panels Quote
Bombprooffrog Posted March 3, 2013 Posted March 3, 2013 (edited) Hi there, Im new to the site and after a gap of far too long I have recently bought Lego kits 8110 and 42004. Firstly Id like to say what an amazing collection of modified 'Mogs there are here, I spent several hours just going through this post and am awestruck, well done guys! As I said this is the first kit I have bought in a long time (unfortunately my Lego collection was "donated" to my cousin years ago so Im starting again from scratch.) I was genuinely surprised at how technical kits are now, but after 11 hours of perseverance I finally ended up with my finished 'Mog and am highly impressed. Unless I have missed one and I apologise if I have but Ive not noticed anyone having converting the grab arm to a back hoe, I think with my limited parts collection this should be an easy first mod, I will try to get some pics up as soon as possible. Keep up the good work guys, you are an inspiration! Edited March 3, 2013 by Bombprooffrog Quote
Pat-Ard Posted March 3, 2013 Posted March 3, 2013 Hi Bombprooffrog, welcome on EB... Yes, pics would be nice... Just have a look at his thread, too... http://www.eurobricks.com/forum/index.php?showtopic=73376 Pat Quote
Laurens-wuyts Posted April 13, 2013 Posted April 13, 2013 This is my mod of the unimog. For more information look at my mocpages acount Quote
jacobkristensen Posted April 13, 2013 Posted April 13, 2013 (edited) Has anyone made the cabin tilt by pneumatics? Also that's a nice red unimog! I have see the other thread about the 8110, there is a picture showing where I have placed two cylinder. But of note is that they can't lift the cabin if the batteri box is suspended under the roof. So I need to check if using lesser friction at rotation point could make it workable, because if I help it raise the firste 1cm then the cylinders can raise it all the way up. Edited April 13, 2013 by jacobkristensen Quote
Someonenamedjon Posted April 14, 2013 Posted April 14, 2013 This is my mod of the unimog. For more information look at my mocpages acount i like it! very creative! i also like the mindstorms part . Do you have a video? Quote
Seasider Posted May 1, 2013 Posted May 1, 2013 I bought the Unimog on Monday and so far have built the chassis. Loving the build so far, although I have to admit lining up some of the axles as you assembled was a pain. One question I have is what route should the power cable connection between the motor and batteries take ? It wasn't clear in the instructions. It looked like they showed it just going externally under the chassis and then back inside where the batteries go. But on my model this means the cable is hanging down slack. i think a slight mod with a couple of pins and the thin half width beams might be my route for holding the cable up. Quote
Alasdair Ryan Posted May 1, 2013 Posted May 1, 2013 I have my cable underneath the chassis,just try to keep it away from any moving parts. Quote
rchan016 Posted May 2, 2013 Posted May 2, 2013 I ran the cable on mine above the center differential "ball", it keeps it out of the way. Quote
Seasider Posted May 2, 2013 Posted May 2, 2013 I ended up rerouting the cable around the grey axle outboard of the motor and then back under the chassis and this has taken most of the slack off. I've now built the Cab and Bed, but I don't think I'll build the Lift Arm I'm thinking of a Plough at the front but that means buying some more plates ! Quote
rchan016 Posted May 4, 2013 Posted May 4, 2013 (edited) I've finally gone and built my version of the Unimog front axle assembly in LDD and made instructions and took pictures. click to download the zip (7.7mb) Props to nicjasno. Edited May 4, 2013 by rchan016 Quote
CisFran Posted May 5, 2013 Posted May 5, 2013 Now I can build the trailer and plow in matching colors Quote
Pat-Ard Posted May 5, 2013 Posted May 5, 2013 Wow... May I ask how much you paid for those panels? Where did you get them from? Pat Quote
CisFran Posted May 6, 2013 Posted May 6, 2013 half of that was bought in BL for around $3.80 each The other half in S@H, my order managed to get through the cracks...Cost around $2.50 each Quote
Jason4x4 Posted May 19, 2013 Posted May 19, 2013 Helow evry one . I am installing the IR kit in my Mog . Eny tips? Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.