Ok, to start this topic off... has anyone attemted to create the mog in sr3d? at the moment i would but my sr3d is having some issues (probably my windows acting up again, i like apple computers better so i'll see if sr3d is available on mac)

i like apple computers better so i'll see if sr3d is available on mac)

SR3D is, unfortunately, not available for Mac.

But you can join me in pestering Sergio until he gets someone to adapt it to Mac.

@Brickdoctor

I wouldnt pester him about it cause i dont like to be annoying. But everything should be made for mac first, that way bill gates can figure out how to copy mac again.

Here are the i dont have the time to build the whole thing,but i can help if you get stuck.

8110 Building Instructions

For the moment I can only deal with the first book as MLCad-file.

If anybody want's it, I would send it out. Just write me a message...

Martin

@Alasdair Ryan

Thanks for the link for the instructions.

But unfortunately my SR3D is having issues, I've downloaded everything that it needs but it seems that when I insert a part i just gives me the error message saying continue or quit and i click continue and it pops up the same box.

@MMR1988

First book is a good start.

Have you contacted XSergio74 the maker of SR3D with your problem ?

XSergio74

Edited November 27, 201113 yr by Alasdair Ryan

@Alasdair Ryan

Not yet, I'm going to try to uninstall everything including ldraw and reinstall it and see if it works, as it could just be an issue with my ldraw library.

Have you tryed the new version?

SR3D builder

Edited November 27, 201113 yr by Alasdair Ryan

@Alasdiar Ryan

I wasn't aware of the new version. I guess I'll have to go over to my desktop and install that version.

While were talking about sr3d wheres a good source to get models? im after the 8109 in particular but would like a look around others

Does anyone know if anybody has made an LDraw or MLCad or any other SR3D accepted model of the unimog?

While were talking about sr3d wheres a good source to get models? im after the 8109 in particular but would like a look around others

On the Cad section of eurobricks you can check out this topic. Offical set's in ldraw/SR3D

Here is the 8109 which i finished a couple of weeks ago.Download file

Does anyone know if anybody has made an LDraw or MLCad or any other SR3D accepted model of the unimog?

Not that i know of.

Edited November 27, 201113 yr by Alasdair Ryan

Ok, to start this topic off... has anyone attemted to create the mog in sr3d? at the moment i would but my sr3d is having some issues (probably my windows acting up again, i like apple computers better so i'll see if sr3d is available on mac)

I did it ;)

But I face a problem regarding rendering sticker.

If you have any idea about this problem, please let me know.

My link

When I solve this problem, I will show complete 8110 with nice rendering image.

Edited November 28, 201113 yr by widetent

@widetent

Thank you so much! You have no idea how much not only I, but alot of others appreciate this.

Now we can test our attachments directly before we build them, or for those like me, test our ideas before we even have our own unimog.

Now i have to see if i can download this since my sr3d is still having issues.

edit: I dont really mind not having the best rendering as long as we have a model.

edit 2: and please post the sr3d unimog under the linked forum for everyone to find it, maybe once you do have a nicer rendering!

http://www.eurobricks.com/forum/index.php?showtopic=48285&st=120

Edited November 28, 201113 yr by zewy623

r3d would not installnon windows XP pro 64 or 86 bit

@SNIPE

I forgot where i had seen it, but there was a whole thing on download issues with the program and how to fix them. I think it might have been under comments on a post on technicbricks

@widetent

Thank you so much! You have no idea how much not only I, but alot of others appreciate this.

Now we can test our attachments directly before we build them, or for those like me, test our ideas before we even have our own unimog.

Now i have to see if i can download this since my sr3d is still having issues.

edit: I dont really mind not having the best rendering as long as we have a model.

edit 2: and please post the sr3d unimog under the linked forum for everyone to find it, maybe once you do have a nicer rendering!

http://www.eurobricks.com/forum/index.php?showtopic=48285&st=120

I have to mention that SR3D didn't show full function yet like real world, for example, pneumatic function.

It support only basic gear connection and little complex hinge at the moment.

and my model has some location that didn't connect with each other because of tolerance. (in this case, I choose better appearance rather than function)

I made this model by alternating SR3D for assembling and MLCAD for flexible pneumatic hose, string, and sticker.

Edited November 28, 201113 yr by widetent

@widetent

Can you possibly post a download file?

@widetent

Can you possibly post a download file?

I tried but couldn't attach the file because of global upload quata. (Used 93.64K of your 100K global upload quota (Max. single file size: 6.36K))

It has a big size, 550KB, because of flexible parts by Lsynth.

I am sorry to say that I will attache it later if I found a way.

Edited November 28, 201113 yr by widetent

@widetent

I think you can do this:

Get on this forum (the sr3d forum- projects) and start a new topic or thread:

http://sr3d.spoonclan.com/viewforum.php?f=13&sid=b4491e7f5036b0ebf95fe24b02bd08ce

Then you can upload your creation and create a link back here.

@widetent

I think you can do this:

Get on this forum (the sr3d forum- projects) and start a new topic or thread:

http://sr3d.spoonclan.com/viewforum.php?f=13&sid=b4491e7f5036b0ebf95fe24b02bd08ce

Then you can upload your creation and create a link back here.

Hi, I am sorry for late reply.

You can download my model at here or there

Thank you for the download. I'll have to download it when i get done fixing my desktop, it's a long story but my issues were with my RAM...