CM4Sci Posted October 25, 2012 Posted October 25, 2012 Very dissapointed we only got about 2-3 LOTR parts in the new update. I'd like to see the hobbit hairpiece, Gandalf's beard and Sting... -Sci Quote
pbk420 Posted October 25, 2012 Posted October 25, 2012 Lots of minifig parts id like added http://www.bricklink.com/catalogItem.asp?P=98119pb01 Minifig, Headgear Hair Bun with Braid and Gold Hood with Royal Insignia Pattern (SW Queen Amidala) http://www.bricklink.com/catalogItemInv.asp?M=sh013 Hulk Fig Assembly http://www.bricklink.com/catalogItem.asp?P=10303 Arm with Wing http://www.bricklink.com/catalogItem.asp?P=10057pb01 Body / Head Gollum http://www.bricklink.com/catalogItem.asp?P=10907 Minifig, Headgear Helmet Space with Open Face and Top Hinge (Iron Man) http://www.bricklink.com/catalogItem.asp?P=10908pb01 Minifig, Visor with Top Hinge and Gold Iron Man Pattern http://www.bricklink.com/catalogItem.asp?P=95676 Minifig, Headgear Helmet Gladiator http://www.bricklink.com/catalogItem.asp?P=10909 Minifig, Headgear Helmet with Large Curved Flexible Horns (Loki) http://www.bricklink.com/catalogItem.asp?P=10301pb02 Minifig, Headgear Hair with Bat Ears and Dark Bluish Gray Inner Ear Pattern http://www.bricklink.com/catalogItem.asp?P=bb566pb01 Minifig, Shield Broad with Spiked Bottom and Cutout Corner with Handprint Pattern http://www.bricklink.com/catalogItemInv.asp?M=lor027 Lord of the Rings Cave Troll Assembly http://www.bricklink.com/catalogItem.asp?P=10066pb01 Minifig, Headgear Hair Orc with Dark Tan Ears Pattern http://www.bricklink.com/catalogItem.asp?P=10051pb01 Minifig, Headgear Helmet Castle with Lateral Comb and Handprint Pattern http://www.bricklink.com/catalogItem.asp?P=10054pb01 Minifig, Headgear Helmet Castle with Cheek Protection and Comb with Gold Trim Pattern http://www.bricklink.com/catalogItem.asp?P=47544pb01 Minifig Headgear Helmet SW Skiff Guard (Lando Pattern) http://www.bricklink.com/catalogItem.asp?P=92750pb01 Minifig, Head Modified Ewok with White Skull Hat and Dark Brown Pouch http://www.bricklink.com/catalogItem.asp?M=sw402 Jabba the Hutt Assembly http://www.bricklink.com/catalogItem.asp?M=sw408 Salacious B. Crumb (9516) http://www.bricklink.com/catalogItem.asp?P=44363 Bib Fortuna Headpiece http://www.bricklink.com/catalogItem.asp?P=98118pb01 Minifig, Headgear Helmet SW Boushh Pattern http://www.bricklink.com/catalogItem.asp?P=98120pb01 Minifig, Head Modified Gamorrean with Armor and Belt Pattern Quote
Toa_Of_Justice Posted October 29, 2012 Posted October 29, 2012 Dog Three Headed 'Fluffy' http://www.bricklink.../40245c00.gif?0 I made a custom version here. -Toa Of Justice Quote
Aanchir Posted November 8, 2012 Posted November 8, 2012 Collectable minifig surfboard Ummm... that's already there. Design ID is 90397. Plug that into the search box in LDD Extended mode and the part should come up. Quote
SNIPE Posted November 9, 2012 Posted November 9, 2012 (edited) Here are the parts I would like to have in LDD: • Tire Technic Power Puller (32298) (also with 'Technic Power decal, available the pattern tool) • Wheel 62mm D. x 46mm Technic Racing Large (22969) • Tire Technic Racing Large (32296) (patterns such as 'Technic Racing' and 'Michelin' should be available in the pattern tool) • Steering Arm 6.5 x 2 with Tow-ball Socket Rounded, Chamfered (32195b) • Technic, Steering Gear with 4 Ball Joints (x873c01) (inner half) • Technic, Steering Gear with 4 Ball Joints (x873c01) (outer half) • Technic, Axle Connector Rectangular Triple Spring-Loaded (x928cx1) • Technic, Axle 4 Threaded (3705b) • Technic, Axle 10 Threaded (3737b) • Technic Axle Nut (4698) • 24 T clutch gear (60c01) • 16 T Gear with Clutch, Smooth (6542b) • 12 T gear rack (32132) • 14 T gear rack (32185) • Electric, Motor 9V 5 x 4 x 2 1/3 (2838c01) • Electric, Motor 9V Mini-Motor, newer lighter weight (43362c01) • Electric, Motor 9V Power Functions L motor (99499c01) • Electric, Motor 9V Power Functions with Gear Reduction Ratio 9.5 : 1 (87577c01) • Electric, Motor RC Race Buggy (5292) • Technic, Pin 1/2 with 2L Bar Extension (61184) • Technic plates that don't exist already (4263, 2711, 4262, 4442, 2719, 2712, 32125) • Technic Bush 1/2 Toothed Type I (4265a) • Technic, Shock Absorber 10L Damped, Complete Assembly (32181c02) (has no spring like the other shocks in LDD) • Technic, Axle 2 (3704) (no notches) • Technic, Axle Flexible 26L (x334c01) (two ends should detach so it has more use in building) • Sports Minifig Stand, Bottom (51219) • Technic, Universal Joint 4L (9244) (that can be taken off the centre holder so they can be attached to half of a 3L UV joint.) • Sports Minifig Stand Soccer (30488c01) (Pin only, compatible with centre of a UV joint and can have rigid hose put through the hole+pin hole) • Wheel 81.6 x 34 ZR Three Spoke Swirl (32197) • Tire 81.6 x 36 R Technic Straight Tread (x1825) • Tiles with no groove on the bottom (3070a, 3069a, 3068a) • Technic, Liftarm 1 x 9 Offset Crossover (32079) • Technic, Liftarm 3 x 7 x 2 Fork 3 Fingers (32308) • Bionicle Bohrok Shoulder, Liftarm 1 x 3 x 7 (41672) • Bionicle Head Connector Block Eye/Brain Stalk - Short (57536) • Bionicle Head Connector Block Eye/Brain Stalk (Piraka) - Light-Up (54359) • Bionicle Head Connector Block Eye/Brain Stalk (Toa Metru) (47313) • Bionicle Hydruka Back Plate (Morak), Marbled Glow In Dark Pattern (57560pb01) • Bionicle Krana Holder 3 x 4 (42042) • Bionicle Matoran Back, Liftarm 4 x 4 x 2 (44137) • Bionicle Matoran Kolhii Ball (44812) • Bionicle Rahkshi Torso Lower Section (44135) • Bionicle Rahkshi Chest Section (44136) • Znap Crank Connector 1 x 2 x 3 (32207) • Technic, Steering Arm (4261) • Bionicle Tohunga Foot (32576) • Bionicle Tohunga Torso (32577) • Brick, Modified 2 x 4 with Top/Side/End Holes (3709a) • Bionicle Visorak Torso, Liftarm 8 x 3 x 2 (50904) • Belville Hoop, diameter approximately 7 studs )hoop01) • Fabuland Car Roof, Fixed Curve (4086) • Fabuland Ferris Wheel Axle Support (4783) • Fabuland Window 1 x 4 x 5 with Curved Top (fabai4) • Fabuland Window 2 x 4 x 5 with Square Top (4608) • Fabuland Window Arch (fabai3) • Black Pin for Freestyle Wheel (2344) Long list, but probably wont happnen in a single update. Edited December 23, 2012 by SNIPE Quote
Superkalle Posted November 9, 2012 Author Posted November 9, 2012 Here are the parts I would like to have in LDD: Power puller /F1wheels and tires (slick and balloon with the patterns in the pattern tool. (technic, racers, or Michelin patterns). Steering Arm 6.5 x 2 with Tow-ball Socket Rounded, Chamfered Steering Gear with 4 Ball Joints, (inner hub with pins) Steering Gear with 4 Ball Joints, (outer hub with ball joints) 24 T clutch gear Technic, Axle Connector Rectangular Triple Spring-Loaded 4L UV joint that can be crossed with a 3L UV on one side. OR the hockey mini-fig holder pin (See below) Threaded 4L axle Threaded 10L axle Nut for threaded axle 16 T Gear with Clutch, Smooth 12 T gear rack 14 T gear rack Electric, Motor 9V 5 x 4 x 2 1/3 Electric, Motor 9V Mini-Motor, newer lighter weigh Electric, Motor 9V Power Functions L with Dark Bluish Gray Bottom Part No: 87577c01 Name: Electric, Motor 9V Power Functions with Gear Reduction Ratio 9.5 : 1 Electric, Motor RC Race Buggy Technic, Pin 1/2 with 2L Bar Extension Technic plates that don't exist already in LDD Toothed technic bush Technic, Shock Absorber 10L Damped, Complete Assembly (has no spring like the other shocks in LDD) Technic, Axle 2, no notches Technic, Axle Flexible 26L (Axle 2L and 5L Ends) with Dark Gray Cable (two ends should detach so it can be threaded through holes in beams etc.) Sports Minifig Stand, Bottom Sports Minifig Stand Soccer (Pin only and should be able to join two together by the center holder of a UV joint since it can in real life, should be able to bit a bar or rigid hose through the center) Wheels and tires from the 8448 and 8430-1 Tiles with no groove on the bottom Technic, Liftarm 1 x 9 Offset Crossover Technic, Liftarm 3 x 7 x 2 Fork 3 Fingers Bionicle Bohrok Shoulder, Liftarm 1 x 3 x 7 Bionicle Head Connector Block Eye/Brain Stalk - Short Bionicle Head Connector Block Eye/Brain Stalk (Piraka) - Light-Up Bionicle Head Connector Block Eye/Brain Stalk (Toa Metru) Bionicle Hydruka Back Plate (Morak), Marbled Glow In Dark Pattern Bionicle Krana Holder 3 x 4 Bionicle Matoran Back, Liftarm 4 x 4 x 2 Bionicle Matoran Kolhii Ball Bionicle Rahkshi Torso Lower Section Bionicle Rahkshi Chest Section Znap Crank Connector 1 x 2 x 3 Technic, Steering Arm (4261) Bionicle Tohunga Foot Bionicle Tohunga Torso Brick, Modified 2 x 4 with Top/Side/End Holes Bionicle Visorak Torso, Liftarm 8 x 3 x 2 Part numbers, part numbers, part numbers Quote
Calabar Posted November 9, 2012 Posted November 9, 2012 and, maybe, links to Bricklink or even thumbnails! Quote
Aanchir Posted November 12, 2012 Posted November 12, 2012 It seems the number for this one (array of decorative packed together parts) is 93081.. but anyway, this: That's already on LDD (part number 95829). Anyway, here are some Hero Factory parts I'd like to see: 87802 87818 98587 98588 98589 98592 98593 98594 98596 98597 98604 There are more missing, of course, but these are the ones I want the most (most of them being extremely important parts from the summer 2012 sets). Quote
master3019 Posted November 18, 2012 Posted November 18, 2012 (edited) I'm really disappointed with the lack of varied prints provided. Also, we need more usable minifigure pieces. 53494 http://www.bricklink.com/catalogItem.asp?P=53494 bb447448 http://www.bricklink.com/search.asp?colorID=1&itemID=91793 43369c99 http://www.bricklink.com/search.asp?colorID=28&itemID=56610 40250cx2 http://www.bricklink.com/search.asp?colorID=88&itemID=75027 61190a http://www.bricklink.com/search.asp?colorID=85&itemID=81207 99250pb01 http://www.bricklink.com/search.asp?colorID=5&itemID=109215 44827pb01 http://www.bricklink.com/search.asp?colorID=12&itemID=40553 93148pb01 http://www.bricklink.com/search.asp?colorID=48&itemID=97996 92751pb01 http://www.bricklink.com/search.asp?colorID=69&itemID=104401 92945pb01 http://www.bricklink.com/search.asp?colorID=59&itemID=98168 98154pb01 http://www.bricklink.com/search.asp?colorID=89&itemID=112865 10164pb01 http://www.bricklink.com/search.asp?colorID=1&itemID=112814 96223pb01 http://www.bricklink.com/search.asp?colorID=69&itemID=101677 x105 http://www.bricklink.com/search.asp?colorID=5&itemID=3235 Edited November 18, 2012 by Calabar Links to store list replaced to part links. Quote
SpiderSpaceman Posted November 18, 2012 Posted November 18, 2012 That's already on LDD (part number 95829). Sure, but it wasn't back on the 2nd of february Quote
Aanchir Posted November 19, 2012 Posted November 19, 2012 Sure, but it wasn't back on the 2nd of february Huh, my mistake. No idea how I even ended up looking at a post so old... Quote
Graysmith Posted November 26, 2012 Posted November 26, 2012 Not sure if this should go in here or in the bugs thread, but it annoys me greatly that the piece that should be the short-billed cap (86035, 4485b on BL) instead uses the same model as the older long-billed cap (4485). Would definitely like to get that fixed as soon as possible. Quote
NitroX infinity Posted December 22, 2012 Posted December 22, 2012 2609; Magnet Holder Tile 2 x 2 30159 Magnet Holder Plate 2 x 2 Bottom Quote
DLuders Posted December 22, 2012 Posted December 22, 2012 I'd like to see these new Lego Power Functions motors that came with the 9398 4x4 Crawler set (and which will be sold individually by The Lego Group starting in March 2013): 99499c01 "Electric, Motor 9V Power Functions L with Dark Bluish Gray Bottom" and 99498c01 "Electric, Motor 9V Power Functions Servo with Dark Bluish Gray Bottom": Quote
Toa_Of_Justice Posted December 24, 2012 Posted December 24, 2012 2717 - Technic Seat 3 x 2 Base 4265b - Technic Bush 1/2 Toothed Type II 6594 - Tire 49.6 x 28 VR 6595 - Wheel 49.6 x 28 VR with Axle Hole 6642 - Technic, Flex Cable End Double, Pin Connection 6644 - Technic, Flex Cable End, Ball Connection with Cage bb08c06L - Technic, Flex Cable (Stud Measure) 6L (and other flex cables; with the ability to flex) 75 - Hose, Rigid 3mm D. (this specific length is not available in LDD) -Toa Of Justice Quote
pbat Posted January 2, 2013 Posted January 2, 2013 (edited) In version 4.1.8 the shield box 2578 was included as the hinge variant (http://www.bricklink...tem.asp?P=2578b). It was later changed, so that in 4.3.5 we now have the towball variant (http://www.bricklink...tem.asp?P=2578a). I can't remember the exact time the change was made, but it must have been sometime in 2012, either at the January or the September update. Thus older LXF files created with the hinge variant will no longer load this piece, as the 'new' 2578 won't fit with the hinge plates like 3938. It might be a bit tricky that two distinct parts share the same number (and generally part 2578 wasn't used in that much sets in either version), however in order to being able building the street sweeper 6645 I want the old hinge variant back. But don't remove the towball variant, include them both, perhaps with new and distinct part numbers like 25781 and 25782 which are according to bricklink still free to use. Edited January 3, 2013 by pbat Quote
Superkalle Posted January 3, 2013 Author Posted January 3, 2013 In version 4.1.8 the shield box 2578 was included as the hinge variant (http://www.bricklink...tem.asp?P=2578b). It was later changed, so that in 4.3.5 we now have the towball variant (http://www.bricklink...tem.asp?P=2578a). Actually, if I remember correctly, the version initially in LDD was actually neither of the two, but some kind of odd hybrid with two hinge brackets (should be three as can be seen on the BL pics). So a decision was made to update it to the most recent (and most commonly used) version, which is the one with the tow-ball. Both physical versions had the same DesignID, i.e. it's one of those rare cases where TLG decided to re-use the same DesignID-number even though the brick is quite clearly physically different. You can see this on the real bricks too, becuase both version have 2578 stamped. Like you suggests, the solution could be to introduce a virtual DesignID in LDD. But to be honest, I'm not sure if/when that will happen, since the hinge variant was only used in one set back in 1991 and thus is quite low on the prio-list. Quote
pbat Posted January 3, 2013 Posted January 3, 2013 But to be honest, I'm not sure if/when that will happen, since the hinge variant was only used in one set back in 1991 and thus is quite low on the prio-list. I was afraid the answer was sort of this. But because the hinge variant already has existed, I hoped it wouldn't be too hard for TLG to reintegrate it once more. I mean, they already had this part integrated, so it can't be too much work to offer it again, since they don't have to construct completely new stuff. However, I totally agree that a part needed in only one single set more than 20 years ago (6645) won't have highest prio either. But as the title of this thread isn't "What is the most important and likely parts to come with the next LDD update", but rather "Most wanted bricks..." I decided to request it here nonetheless. Actually there are some other old parts I sorely miss, such as the sunroof with glass (http://www.bricklink...Item.asp?P=2349, http://www.bricklink...tem.asp?P=2348a and http://www.bricklink...tem.asp?P=2348b) the appropriate roof holder 1 x 4 x 2 (http://www.bricklink...Item.asp?P=4214) the hinge bucket (http://www.bricklink...Item.asp?P=4626) the hinge hinge plate 1 x 6 with 2 and 3 fingers on its ends (http://www.bricklink...Item.asp?P=4504) the hinge hinge plate 1 x 6 with 2 and 3 fingers on its sides (http://www.bricklink...Item.asp?P=4507) the digger bucket holders (http://www.bricklink...Item.asp?P=3597 and http://www.bricklink...Item.asp?P=3315) the hinge bar 8L with 3 fingers and open end stud (http://www.bricklink...Item.asp?P=4319) the hinge bar 12L with 3 fingers and open end stud (http://www.bricklink...Item.asp?P=2375) the pantograph shoe holder (http://www.bricklink...Item.asp?P=2880) the boat mast 2 x 2 x 9 2/3 (http://www.bricklink...Item.asp?P=4318) the hinge brick 2 x 24 (http://www.bricklink...tem.asp?P=47978) the small fence gate 1 x 3 x 2 (http://www.bricklink...Item.asp?P=3358 and http://www.bricklink...Item.asp?P=3359) the utensil jack (http://www.bricklink...Item.asp?P=4627, http://www.bricklink...Item.asp?P=4628 and http://www.bricklink...Item.asp?P=4629) the bracket 2 x 2 - 1 x 4 (http://www.bricklink...Item.asp?P=2422) the technic rack 1 x 20 x 2/3 (http://www.bricklink...Item.asp?P=2428) and of course many old-style baseplates, both flat and raised (http://www.bricklink...m.asp?P=2361px1, http://www.bricklink...m.asp?P=2361px2, http://www.bricklink...em.asp?P=425p01, http://www.bricklink...em.asp?P=425p02, http://www.bricklink...m.asp?P=2359px2, http://www.bricklink...em.asp?P=309px1, http://www.bricklink...em.asp?P=309px2, http://www.bricklink...m.asp?P=4478px3, http://www.bricklink...Item.asp?P=6024, http://www.bricklink...tem.asp?P=3947b, http://www.bricklink...m.asp?P=6092px2, http://www.bricklink...m.asp?P=2552px6) None of these parts was used in sets of the recent years and almost every part was discontinued more than 10 years ago. Thus it becomes harder and harder to get any of these bricks in 'real life'. Hence it is desirable to have those old bricks as virtual LDD ones at least. May the prio be as low as it may be, hope dies last. Quote
Calabar Posted January 3, 2013 Posted January 3, 2013 I was afraid the answer was sort of this. But because the hinge variant already has existed, I hoped it wouldn't be too hard for TLG to reintegrate it once more. Get in line, I'm still waiting the part 4737, still present in LDD 3! Same destiny for the window 4741, that fortunately can be easily replaced with parts 4447 and... mmm... the opposite one! It seems the destiny for removed parts is not so bright! Quote
pbat Posted January 3, 2013 Posted January 3, 2013 It seems the destiny for removed parts is not so bright! Has someone tried to convince TLG to make a paid version of LDD? I'm quite willing to pay some 20 bucks if I get all the old parts and decorations. It still would be cheaper than crawling ebay for the real bricks. Quote
willowswitch Posted January 4, 2013 Posted January 4, 2013 (edited) This piece: 2607 And this piece: 2609 Because otherwise the magnet is pretty much useless. And decorations from Ice Planet 2002. Edited January 4, 2013 by willowswitch Quote
Superkalle Posted January 4, 2013 Author Posted January 4, 2013 Has someone tried to convince TLG to make a paid version of LDD? Yes But as the title of this thread isn't "What is the most important and likely parts to come with the next LDD update", but rather "Most wanted bricks..." I decided to request it here nonetheless. And you did right The problem with the two versions of the 2578 is that a virtual ID needs to be introduced, and at the moment LDD is based 100% on the internal databases at TLG which only has one. On a side note, I can mention that I keep a log of all wanted bricks from this topic, and send it to TLG once in a while. So they are definitely aware of what we fans are wishing for, and add as many as they can. Get in line, I'm still waiting the part 4737, still present in LDD 3! Yepp, Calabar is first in line Quote
pbat Posted January 5, 2013 Posted January 5, 2013 Yes And? Don't they want our money? I mean, if I ran a business and offered stuff for free and someone suggested to give me money for it, I guess I knew what to do. So what hinders TLG to offer a LDD Premium? Maybe they should start a pay-per-brick campaign on kickstarter: LDD gets part 4737 back if Calabar (or others too) collect some 10000 crunchy fish fingers or whatever currency they use up in Denmark. On a side note, I can mention that I keep a log of all wanted bricks from this topic, and send it to TLG once in a while. So they are definitely aware of what we fans are wishing for, and add as many as they can. Why not add some candy and chocolate and jellies and cookies when sending them the log? Maybe they are bribable . http://www.youtube.com/watch?v=Ch8uCOPbH7I No, seriously, please do priorize Door Frame 2 x 6 x 7 (http://www.bricklink...Item.asp?P=4071) & Door 1 x 6 x 7 Barred (http://www.bricklink...Item.asp?P=4611). Calabar requested these parts almost a year ago; and if I recall it correctly, they are the only ones missing to complete Fort Legoredo (6769 / 6762). And as they are needed for Forbidden Island (6270), Eldorado Fortress (6276) and Rock Island Refuge (6273) as well, I guess a lot of LDD pirates would be very happy to finally have them available. Quote
Masta' Blasta' Posted January 5, 2013 Posted January 5, 2013 Where to start.. where to start.. Really, I'd like the addition of a few MARVEL Super Heroes parts, which LDD seems to be lacking. http://www.bricklink...tem.asp?P=10907 http://www.bricklink...asp?P=10908pb01 - Without decal (?) application. It might be nice to color different parts of this. http://www.bricklink...tem.asp?P=10187 http://www.bricklink...tem.asp?P=10154 http://www.bricklink...tem.asp?P=10124 http://www.bricklink...asp?P=10121pb01 - It would be nice to be able to color multiple parts of this and maybe even the addition of the face printing. http://www.bricklink...tem.asp?P=10127 - Since the similarity to the giant troll hands, I don't mind if this is left out. As long as they are compatible with the Hulk's arms, that is. http://www.bricklink...tem.asp?P=10126 - The same as the previous. http://www.bricklink...tem.asp?P=10909 http://www.bricklink...asp?P=10305pb01 - It would be nice if part of this were able to be colored differently. http://www.bricklink...tem.asp?P=75904 I'd also like a few other minifigure parts and accessories. http://www.bricklink...asp?P=72326pb01 http://www.bricklink...tem.asp?P=11010 http://www.bricklink...p?P=973pb630c99 http://www.bricklink...sp?P=970c99pb01 http://www.bricklink...em.asp?P=970d15 And maybe some Hero Factory parts, too. http://www.bricklink...tem.asp?P=87802 http://www.bricklink...tem.asp?P=87817 http://www.bricklink...asp?P=98588pb01 http://www.bricklink...tem.asp?P=98592 http://www.bricklink...tem.asp?P=98593 http://www.bricklink...tem.asp?P=98596 http://www.bricklink...tem.asp?P=98604 I suppose that is it. I didn't want the list to be too lengthy and I'm sure plenty of these have already been requested prior to this post. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.