Slegengr Posted May 31, 2017 Posted May 31, 2017 1 hour ago, Legostone said: I remember the stingrays feeling slightly different from other Lego, a bit more flexible maybe. I can confirm this from my experience. They also have a rougher surface finish. Quote
wgemini Posted May 31, 2017 Posted May 31, 2017 Hi, does anybody know whether the large curved pieces (quarter cylinder?) with hinge in 30166 (creator space shuttle) is new? What's the designer id for it? Thanks. Quote
Slegengr Posted May 31, 2017 Posted May 31, 2017 @wgemini It looks like piece 18910 according to BrickLink and the same 18910 according to BrickSet. It is in 3 sets at this point in time, two sets in white and one set in orange. Quote
wgemini Posted May 31, 2017 Posted May 31, 2017 28 minutes ago, Slegengr said: @wgemini It looks like piece 18910 according to BrickLink and the same 18910 according to BrickSet. It is in 3 sets at this point in time, two sets in white and one set in orange. Great. thanks. Quote
Exetrius Posted June 4, 2017 Posted June 4, 2017 Could anyone tell me what the grey pieces with pinholes and bend (front of the model) are? Picture: MD 140 Hellcat by polywen, on Flickr Quote
NathanR Posted June 4, 2017 Posted June 4, 2017 50 minutes ago, Exetrius said: Could anyone tell me what the grey pieces with pinholes and bend (front of the model) are? Picture: Could be mistaken, but it looks like 2991b to me. I've seen it in LDD but never handled one in real life. Quote
Exetrius Posted June 4, 2017 Posted June 4, 2017 34 minutes ago, NathanR said: Could be mistaken, but it looks like 2991b to me. I've seen it in LDD but never handled one in real life. Wow, so weird! Thanks! Quote
baggio_vai Posted June 15, 2017 Posted June 15, 2017 Hello everyone. who can tell me this part's number, I can't fint it at LDD and brickset.com Thank you! Quote
NathanR Posted June 15, 2017 Posted June 15, 2017 (edited) Hi Baggio_vai, welcome to eurobricks! Ooh, those are old pieces, Lego haven't made those since the 90s I think... The pylon arm seems to be made from 1x 4531 and 2x 2880. They're definitely in LDD, though you might need to be working in extended mode to be able to find them. Is this a train your building? Edited June 15, 2017 by NathanR Correction, I just checked and part 2880 is indeed missing from LDD... Quote
baggio_vai Posted June 15, 2017 Posted June 15, 2017 48 minutes ago, NathanR said: Hi Baggio_vai, welcome to eurobricks! Ooh, those are old pieces, Lego haven't made those since the 90s I think... The pylon arm seems to be made from 1x 4531 and 2x 2880. They're definitely in LDD, though you might need to be working in extended mode to be able to find them. Is this a train your building? Dear NathanR, Thank you for your help! this train's Instructions belongs to my German colleague. would please help me to check this part's number? Quote
NathanR Posted June 15, 2017 Posted June 15, 2017 That's a mini lever base. It's part of a small antennae made up of a base and a lever - Lego only sells them as complete units now but it's really easy to pull them apart. Quote
MAB Posted June 15, 2017 Posted June 15, 2017 5 hours ago, baggio_vai said: Hello everyone. who can tell me this part's number, I can't fint it at LDD and brickset.com Thank you! 2 There are similar modern parts you can use instead, check a reasonably up to date train, like the red passenger train (set 7938). Quote
Ronan Posted June 15, 2017 Posted June 15, 2017 Hey guys! I found this broomstick from Lego Dimensions, what piece is that? Quote
baggio_vai Posted June 16, 2017 Posted June 16, 2017 On 2017/6/15 at 9:32 PM, NathanR said: That's a mini lever base. It's part of a small antennae made up of a base and a lever - Lego only sells them as complete units now but it's really easy to pull them apart. Thank you so much! On 2017/6/15 at 9:42 PM, MAB said: There are similar modern parts you can use instead, check a reasonably up to date train, like the red passenger train (set 7938). I will check it, thank you! Quote
Exetrius Posted June 16, 2017 Posted June 16, 2017 23 hours ago, Ronan said: Hey guys! I found this broomstick from Lego Dimensions, what piece is that? Doesn't seem like an official physical piece to me. Quote
ColletArrow Posted June 17, 2017 Posted June 17, 2017 @Ronan I'd say it's an 'animated' version of 24085 mop head, but I could be wrong. Quote
Exetrius Posted June 20, 2017 Posted June 20, 2017 https://brickset.com/parts/design-28220 Could anyone tell me what kind of attachment points this part has on the back? Didn't get to see it on BL and YT reviews. Quote
murphy_slaw Posted June 20, 2017 Posted June 20, 2017 The bricklink page for that part has a rear view. It has two small constraction pins on the back. Quote
Exetrius Posted June 21, 2017 Posted June 21, 2017 (edited) 9 hours ago, murphy_slaw said: The bricklink page for that part has a rear view. It has two small constraction pins on the back. Ah, thanks! I only looked at a printed variant of the part, which didn't have a rear shot. My bad! Edited June 21, 2017 by Exetrius Quote
Exetrius Posted June 30, 2017 Posted June 30, 2017 Anyone know if the blocks of the pen connect to regular studs? Picture: https://www.bricklink.com/v2/catalog/catalogitem.page?G=P1564#T=P Quote
Slegengr Posted June 30, 2017 Posted June 30, 2017 42 minutes ago, Exetrius said: Anyone know if the blocks of the pen connect to regular studs? I am pretty sure they can. I do not have any of the blocks, but I do have a head from a pen that fits with studs. The connection is too tight to properly attache the head on a minifigure neck, though, so it might grip a stud pretty tightly as well. I cannot verify this in person at the moment... Quote
Darkdragon Posted June 30, 2017 Posted June 30, 2017 1 hour ago, Exetrius said: Anyone know if the blocks of the pen connect to regular studs? They fit but are tight and do pop off at the slightest tap sometimes. I used one on my calendar Quote
Exetrius Posted June 30, 2017 Posted June 30, 2017 (edited) 4 hours ago, Slegengr said: I am pretty sure they can. I do not have any of the blocks, but I do have a head from a pen that fits with studs. The connection is too tight to properly attache the head on a minifigure neck, though, so it might grip a stud pretty tightly as well. I cannot verify this in person at the moment... 3 hours ago, Darkdragon said: They fit but are tight and do pop off at the slightest tap sometimes. I used one on my calendar Thanks guys! A Dutch webshop has them 75% discounted, down to €1.99 so I guess that's worth a try then. Edited June 30, 2017 by Exetrius Quote
BubbaFit45531 Posted July 4, 2017 Posted July 4, 2017 What's the Design ID for a regular minifigure torso without arms? I want to order the arms and hands separately from the torso so I can get the exact colors I want. Is that possible? Quote
mocbuild101 Posted July 4, 2017 Posted July 4, 2017 54 minutes ago, BubbaFit45531 said: What's the Design ID for a regular minifigure torso without arms? I want to order the arms and hands separately from the torso so I can get the exact colors I want. Is that possible? If you want a plain torso, then the ID is 973 - see here: https://www.bricklink.com/v2/catalog/catalogitem.page?id=1710#T=P But if you want a printed torso, you will have to search through 2127 different designs - see here: https://www.bricklink.com/browseList.asp?itemType=P&catString=150 Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.