BubbaFit45531 Posted May 15, 2019 Posted May 15, 2019 I recently added a 32005 to my parts order thinking the holes were for snaps, but they aren't and are too big for that. Does anyone know what the 32005 part is intended for? The bar is like a cross axle, but you cannot slide anything onto it due to the round holes at each end. It's like "O--------O". I also recently found I could have made use of two 11455's connected via connector with friction for a non-Lego purpose. Quote
NathanR Posted May 15, 2019 Posted May 15, 2019 The 32005 is designed to connect to the towball pieces (2736, 3184, 2508 ...). Usually gets used as part of the suspension in technic cars, where the towball adds some extra freedom of movement over using a standard beam. Quote
ukbajadave Posted June 9, 2019 Posted June 9, 2019 Does anyone know the element id for a 2x2 tile with a single central stud? Struggling to find it on bricklink. Any help gratefully received Quote
Runamuck Posted June 9, 2019 Posted June 9, 2019 Is this what you are looking for: https://brickset.com/parts/design-87580 Quote
ukbajadave Posted June 9, 2019 Posted June 9, 2019 3 hours ago, Runamuck said: Is this what you are looking for: https://brickset.com/parts/design-87580 Nailed it! I was foolishly looking for a tile, not a plate. Quote
mikhdave99new Posted June 18, 2019 Posted June 18, 2019 Hello everyone, I am new to this forum on identifying part sets. I am trying to build mocs but somehow there are parts I cannot identify. A little help will be nice to me and to the future. These are the parts I am trying to identify (the mouth of the moc) Sorry if my language is a bit broken. Thank you, mikhdave99 Quote
Brickbuilder0937 Posted June 18, 2019 Posted June 18, 2019 (edited) I think this is the piece. https://brickset.com/parts/design-98571 Edited June 18, 2019 by Brickbuilder0937 Quote
mikhdave99new Posted June 20, 2019 Posted June 20, 2019 Hello everyone, I recently come across parts that may be hard to identify while I was browsing parts for my moc The black Hemispheres of the Drum set (Bass Drum and Floor Tom). They are hemispheres but different size P.S. @brickbuilder0937 Thank you for the parts name, I appreciate for your help. Sorry if my language is a bit broken. Thank you, mikhdave99new Quote
Peppermint_M Posted June 20, 2019 Posted June 20, 2019 3 hours ago, mikhdave99new said: The black Hemispheres of the Drum set (Bass Drum and Floor Tom) Which set are these in? I had a quick look for Lego drum sets and can only find MOCs. Quote
mikhdave99new Posted June 20, 2019 Posted June 20, 2019 11 minutes ago, Peppermint_M said: Which set are these in? I had a quick look for Lego drum sets and can only find MOCs. MOCS huh? do you know the name of the parts? Quote
Peppermint_M Posted June 20, 2019 Posted June 20, 2019 No clue. Some used cylinder parts, others used dish parts. This official set has a drum kit. Quote
mikhdave99new Posted June 20, 2019 Posted June 20, 2019 3 hours ago, Peppermint_M said: This official set has a drum kit. turns out I have this kind of parts, but thanks for the help. I will keep searching further Thank you. mikhdave99new Quote
astral brick Posted June 25, 2019 Posted June 25, 2019 Can you please help me to identify the following parts in this video https://youtu.be/KJysoLiCCqE#t=1m51s 1 The thin black liftarm with the oval shape (between the 1x2 thin liftarm and the 3x3 L-shape one) 2 The yellow part next to the four red ones 3 The black part next to the 1x2 black liftarm 4 The small grey part next to the black bar Quote
Brickbuilder0937 Posted June 27, 2019 Posted June 27, 2019 On 6/25/2019 at 2:54 AM, astral brick said: Can you please help me to identify the following parts in this video 1. https://brickset.com/parts/design-6575 2.https://brickset.com/parts/design-2853 3.https://brickset.com/parts/design-45590 4.https://brickset.com/parts/design-51976 (flex tubing cut to custom length) Quote
astral brick Posted June 28, 2019 Posted June 28, 2019 19 hours ago, Brickbuilder0937 said: 4.https://brickset.com/parts/design-51976 (flex tubing cut to custom length) Thank you very much for your help! Especially for point no. 4, it was really difficult to identify the part. Quote
Carsten Svendsen Posted June 29, 2019 Posted June 29, 2019 Hi, These dinos are very old and from my childhood. I have all the parts to put them together, but I don't have the instructions. Anyone knows which set they are from? Quote
Brickbuilder0937 Posted June 30, 2019 Posted June 30, 2019 It looks like they are from these three sets: https://brickset.com/sets/7000-1/Baby-Ankylosaurus https://brickset.com/sets/7001-1/Baby-Iguanodon https://brickset.com/sets/7002-1/Baby-Brachiosaurus Quote
Carsten Svendsen Posted June 30, 2019 Posted June 30, 2019 @Brickbuilder0937 thank you very much, it's exactly what I was looking for Quote
The Cobra Posted July 5, 2019 Posted July 5, 2019 Asking for an Italian AFOL... is the torso original Lego or custom? Quote
Holodoc Posted July 6, 2019 Posted July 6, 2019 mmmh... I checked BL with the phrase "blue torso belt" and all that came up were these torsos: click! I didn't find anything similar. Looking very closely it seems that the print isn't as crisp/sharp as the TLC prints. So in my opninion it's not genuine LEGO. Quote
timemail Posted July 13, 2019 Posted July 13, 2019 (edited) I am looking for is a chisel or a piece that a minifig could use as a chisel. I haven't been able to locate a specific chisel part and was wondering if anyone knew of one or a substitute. I will be using the new Harry Potter deer piece as an ice sculpture in my Winter Village and want to have an artist with a hammer and chisel making the finishing touches on it. Never mind. I have come across a screwdriver piece (Item No: 11402a) which will substitute nicely. Edited July 13, 2019 by timemail Found part. Quote
Ronan Posted July 30, 2019 Posted July 30, 2019 (edited) Early Harry Potter graveyard design had some kind of Cedric prototype figure, these pics have bad Resolution, can you guess what is that torso used? It must be a torso produced before 2005. Also if someone has some additional photos, I would like to see them. ;) http://www.brickshelf.com/cgi-bin/gallery.cgi?i=1112446 Edited July 30, 2019 by Ronan Forgot to add picture Quote
MAB Posted July 30, 2019 Posted July 30, 2019 On 7/5/2019 at 4:45 PM, The Cobra said: Asking for an Italian AFOL... is the torso original Lego or custom? I also don't think it is a genuine LEGO one. Unfortunately BL doesn't have the keyword belt for all torsos with a belt (such as for some of the original forestmen) but also nothing comes up under other keywords such as purse. It is a strange combination, the black marks at the edges makes the figure look quite busty with hips, typically done for female characters. It is also a fleshie skin one, as can be seen near the neckline. Quote
MatBoyWonder Posted September 22, 2019 Posted September 22, 2019 Hello - figured bumping this beats making a new forum post! (sorry if i did a boo boo)... I'm looking for a part.. well... colour recommendation for a project I'm working on... I've been working on a way to display my DC superhero sets and ended up building (still in progress) a city battle scene (using bits and pieces from the DC and TLBM lines to build up my city as I've never bought a city set in my life). It's sitting inside a dark wooden bookcase shelf so to make it pop, and look more comicbook, I want to build in a 2d background the height and width of the shelf to slot in the back. My problem is the sky... I've a heap of standard blue (royal blue?) bricks, but they are much too overpowering. So i was curious if anyone could recommend a sky blue colour of brick (and what its called offically, since photos are never that helpful) thats ideally available in 1 stud width. cheers for checking out my inane ramble :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.