1 hour ago, legoSDR said:

Personally I'd make the hair the same as Scarlet Witch, either the AoU or Civil War version would work. But then I've not seen the film, I'm just going off what I know about the character

I thought that Lego uses that too much so I went with something else

Does anyone know a good body for Classic Ant-Man?

Just now, Brick Guru said:

Does anyone know a good body for Classic Ant-Man?

I have a few suggestions:

The praetorian guard’s torso from the recent praetorian guard battle pack

The flame thrower’s armorless torso from the nexo knight sets (here’s a link for what it looks like: https://www.bricklink.com/v2/catalog/catalogitem.page?P=973pb2195c01&idColor=5#T=C&C=5)

Von regg’s torso from that star wars resistance set with his red tie interceptor

hope this helps!

 

On 8/9/2019 at 11:56 AM, Captain-DeadPool said:

I have a few suggestions:

The praetorian guard’s torso from the recent praetorian guard battle pack

The flame thrower’s armorless torso from the nexo knight sets (here’s a link for what it looks like: https://www.bricklink.com/v2/catalog/catalogitem.page?P=973pb2195c01&idColor=5#T=C&C=5)

Von regg’s torso from that star wars resistance set with his red tie interceptor

hope this helps!

 

That helps, but I meant something more along the lines of this:

https://www.flickr.com/photos/183090921@N07/48498379791/in/dateposted-public/

Edited August 17, 20195 yr by Brick Guru

Luke Cage: 

(i have a classic version of him coming soon, once I decide on a torso)

headhttps://www.bricklink.com/v2/catalog/catalogitem.page?id=163872#T=C&C=88

torso,arms and legs: https://www.bricklink.com/v2/catalog/catalogitem.page?M=coltlbm12&name=Eraser - Minifigure Only Entry&category=[Collectible Minifigures][The LEGO Batman Movie]#T=S&O={"iconly":0}

 reddish brown hands as well

Maria Rambeau and Netflix Elektra

9 hours ago, ApocSlay said:

Maria Rambeau and Netflix Elektra

 

Where'd you get Maria's torso and legs from?

also, that elekta is great! 

Edited August 11, 20195 yr by LuxorV
Please do not quote images from the same page, and especially the post above yours. Thank you.

Please ignore the spoiler tags - can't seem to remove them after accidentally adding them:

Maria:

Torso and legs - https://www.bricklink.com/v2/catalog/catalogitem.page?M=sw0884#T=S&O={"iconly":0}

Head - https://www.bricklink.com/v2/catalog/catalogitem.page?M=idea034#T=S&O={"iconly":0}

You can add Harry Potter's hair to make it more accurate, and then also pickup the helmet and mask from BL

 

Elektra:

Aladdin's arms

Torso, legs and hands - Red She-Hulk

Hair - any black piece with a ponytail

Face - Jasmine

 

Really happy with these two tbh, especially considering that Maria is in a SDCC set. Exact same torso, and this version has leg printing :) At this stage seems the only exclusive part of her minifigure is possibly the head.

Also, the half mask that Elektra has is from one on the Ninjago packs, but can't remember which one.

Edited August 11, 20195 yr by LuxorV
Removed unused spoiler tags.

13 minutes ago, ApocSlay said:

  Reveal hidden contents

  Hide contents

 

 

Please ignore the spoiler tags - can't seem to remove them after accidentally adding them:

Maria:

Torso and legs - https://www.bricklink.com/v2/catalog/catalogitem.page?M=sw0884#T=S&O={"iconly":0}

Head - https://www.bricklink.com/v2/catalog/catalogitem.page?M=idea034#T=S&O={"iconly":0}

You can add Harry Potter's hair to make it more accurate, and then also pickup the helmet and mask from BL

 

Elektra:

Aladdin's arms

Torso, legs and hands - Red She-Hulk

Hair - any black piece with a ponytail

Face - Jasmine

 

Really happy with these two tbh, especially considering that Maria is in a SDCC set. Exact same torso, and this version has leg printing :) At this stage seems the only exclusive part of her minifigure is possibly the head.

Also, the half mask that Elektra has is from one on the Ninjago packs, but can't remember which one.

Thanks buddy ?

On 8/5/2019 at 12:37 PM, marvelBoy123 said:

Sorry been working on it. How about this 

http://IMG_20190805_121358320_HDR-01 by marvelBoy123, on Flickr

X-ray reminds me of one of the figs from batman movie CMF perhaps just use that.

They really look awesome! That's exactly what I was looking for! Thank you! 

My pleasure safwanus, let us know if you want ideas for any other characters.

Anyone got an idea for the Wizard? In the classic pink design?

5 hours ago, DeCommander96 said:

Anyone got an idea for the Wizard? In the classic pink design?

Wizard:

Helmet: Crash helmet in magenta

Head: Tony Stark

 Torso: Calculator's from LBM CMF S1. The color doesn't match the helmet, but I couldn't find anything better though.\

Arms: Medium Lavender

Hands: Magenta

Hips: Magenta

 Legs: Medium lavender

 

courtesy of Schwa

5 hours ago, DeCommander96 said:

Anyone got an idea for the Wizard? In the classic pink design?

I have a possible design if you would like to try;

Helmet: Magneto’s helmet from any of the sets he has appeared in

Head: General Zod’s head from the lego batman movie mini-figures series 2

Torso: Mangeto’s torso (the normal or might micros versions work either way)

Arms: standard blue arms with Vision’s hand from any of the sets he has came in

Legs: flash back Lucy’s dual molded legs from the lego movie 2 mini-figure series with a red hip piece

Hope this helps!

@Legoman0120 and @Captain-DeadPool thanks both of these work. 

I would use the same as above but with the arms and legs of the crayon suit minifig.

M'baku (vegetarian version lol)

hair: https://www.bricklink.com/v2/catalog/catalogitem.page?P=27385&name=Minifigure, Hair Wide Mohawk with Coiled Texture&category=[Minifigure, Hair]#T=C

face: (couldn't find it without the rest of the body) https://www.bricklink.com/v2/catalog/catalogitem.page?M=sh470&name=Cyborg&category=[Super Heroes][Justice League]#T=S&O={"iconly":0}

neck attachment: https://www.bricklink.com/v2/catalog/catalogitem.page?P=26066&name=Minifigure, Collar Fur&category=[Minifigure, Body Wear]#T=C&C=1

torso (backwards)https://www.bricklink.com/v2/catalog/catalogitem.page?P=973pb2878&name=Torso Asgardian Armor with Silver Highlights Pattern&category=[Minifigure, Torso]#T=C&C=77

Reddish brown arms, black hands

legs:https://www.bricklink.com/v2/catalog/catalogitem.page?P=970c00pb598&name=Hips and Legs with Imperial Death Trooper Armor Pattern&category=[Minifigure, Legs Assembly]#T=C

16 hours ago, DeCommander96 said:

@Legoman0120 and @Captain-DeadPool thanks both of these work. 

You are welcome man!

Also while I am here, here be thou part list for a red guardian for anyone who wants to try it out:

Helmet: Standard red motorcycle helmet

Head: Robin’s head from the 10753 The joker’s bat cave attack set

Torso: The praetorian guard’s torso from the 75225 praetorian guard battle pack

Arms: Captain hook’s printed arms from the Disney mini-figures series 1 with white hands

Belt: Luke Skywalker’s white belt piece from the 75229 death star escape set

Legs: Captain hook’s dual molded legs from the Disney mini-figures series 1 (erase the printing. Definently not a purist method, but plain red legs can work if you don’t want to erase captain hook’s legs)

I know I asked this already, but does anyone know of a decent torso for this: https://www.flickr.com/photos/183090921@N07/48498379791/in/dateposted-public/

Hopefully not in just red but do what you can. Thanks

 

6 minutes ago, Brick Guru said:

I know I asked this already, but does anyone know of a decent torso for this: https://www.flickr.com/photos/183090921@N07/48498379791/in/dateposted-public/

Hopefully not in just red but do what you can. Thanks

 

How about the official one? I'll find you some suggestions later. Got anything for the helmet?

13 minutes ago, DeCommander96 said:

How about the official one? I'll find you some suggestions later. Got anything for the helmet?

This is the best I've got so far:

https://www.flickr.com/photos/183090921@N07/48559451857/in/dateposted-public/   Sorry for the bad quality.

Edited August 17, 20195 yr by Brick Guru

2 minutes ago, Brick Guru said:

This is the best I've got so far:

https://www.flickr.com/photos/183090921@N07/48559451857/in/dateposted-public/   Sorry for the bad quality.

Like what you did with the helmet, the rest is a bit plain. It can stay like that but we just need to swap the torso. Got my hands full atm, but I'll help you in a bit.

31 minutes ago, DeCommander96 said:

Like what you did with the helmet, the rest is a bit plain. It can stay like that but we just need to swap the torso. Got my hands full atm, but I'll help you in a bit.

Thanks, take your time. I might also change the legs to the CMF Wildlife Photographer's as Ant-Man has blue boots.

Edited August 17, 20195 yr by Brick Guru

2 minutes ago, Brick Guru said:

Thanks, take your time. I might also change the legs to the CMF Arctic Explorer's as Ant-Man has blue boots.

Yeah but it's a bit dark. Unless you want a dark blue Antman?

59 minutes ago, DeCommander96 said:

Yeah but it's a bit dark. Unless you want a dark blue Antman?

He actually has dark blue boots. I'll probably just keep the legs plain red anyway. I'm still puzzled as to what to use as his torso though.

Edited August 17, 20195 yr by Brick Guru