Legends of Chima 2013

[Aethersprite]

Here you go. I used the new album feature, so you can sift through the photos!

If it's not working, look at 'em here!

Thank you so much! Do you mind if I post these in the Action Figure forum? All credit to you, of course.

Edited January 6, 2013 by Ricecracker
Please don;t quote media

[just2good]

Thank you so much! Do you mind if I post these in the Action Figure forum? All credit to you, of course.

Feel free to!

Is that official figure you linked to one of the ones sold early on eBay? In looking at the images publicly released by LEGO of Longtooth, they all look very much like the one you have. Maybe there were last-minute changes to the print job at the factory, and the eBay one was merely a test?

Yea, that is one of the eBay ones. Which new images released by LEGO are you referring to?

Edited January 5, 2013 by just2good

[Crownie]

Yea, that is one of the eBay ones. Which new images released by LEGO are you referring to?

Well first I was looking at this: http://www.flickr.co...in/photostream/, but now that I'm digging around more, on ebay and set part inventories, it does look like yours is missing some red printing! I'd either call or e-mail LEGO customer service. It looks like your head got shorted a color! (Is my face red? )

I'm thinking that Longtooth looks a bit 'cleaned up' in his rendered iteration, while the actual minifig is indeed supposed to have some red coloration? (I.e. scarring.) It's actually kind of a cool 'variant' in a way. "Before" and "After". Sorry for the alarm!

EDIT: In looking at the poster in Huw's photostream I linked to above, I can now make out the red in places - evidently I didn't catch it before. It's apparently been a longer week than I thought, lol. So, my initial opinion was completely baseless in the end. Sorry for the run around! )

Edited January 5, 2013 by Crownie

[just2good]

Well first I was looking at this: http://www.flickr.co...in/photostream/, but now that I'm digging around more, on ebay and set part inventories, it does look like yours is missing some red printing! I'd either call or e-mail LEGO customer service. It looks like your head got shorted a color! (Is my face red? )

I'm thinking that Longtooth looks a bit 'cleaned up' in his rendered iteration, while the actual minifig is indeed supposed to have some red coloration? (I.e. scarring.) It's actually kind of a cool 'variant' in a way. "Before" and "After". Sorry for the alarm!

Yea, I'm getting an extra from the replacement service. I hope I can keep this one!

And why the heck are misprinted minifigure heads atracted to me? First it was the no-dirt angry Buzz, and now it's the no-scar Longtooth. Not that I'm complaining!

Edited January 5, 2013 by just2good

[Vindicare]

Feel free to!

Yea, that is one of the eBay ones. Which new images released by LEGO are you referring to?

Was this one of the "leaked" figs that was on eBay before the sets were even released anywhere?

[just2good]

Was this one of the "leaked" figs that was on eBay before the sets were even released anywhere?

I guess so, but I don't know, as it's from Brickipedia.

[Vindicare]

I guess so, but I don't know, as it's from Brickipedia.

I meant the fig, if you bought it from eBay before the sets were even available then I don't really think it's right to get a free piece from TLG. Maybe between when that fig was released(however that may be) from the factory the red color wasn't part of the character? And, they decided to add the red later. Since theres no red on it, I'd say thats the case. However, if it had the red in the mouth, bit no scar, I'd say it was a printing error.

[just2good]

I meant the fig, if you bought it from eBay before the sets were even available then I don't really think it's right to get a free piece from TLG.

.

[Vindicare]

.

Ah-ha. Disregard my nosey opinion then.

[PenPlays]

That's kinda interesting that you got the preliminary design, just2good. Mine has leg prints that don't line up with the torso at the belt buckle. I digress with that, however if it were a dress piece, in say Ewald's robe, then I would be a tad irritated by it, especially since he's an exclusive minifig.

[CM4Sci]

Apparently, there is going to be a skunk tribe:

Travel deep into the land of Chima to help Skinnet defeat the wold tribe in the LEGO Chima Speedorz Skunk Attack. Attatch Skinnet onto the skunk Speedor, pull the ripcord and unleash the power.

From here. A few other Speedorz Summer sets are on the site, too.

[Scy]

Apparently, there is going to be a skunk tribe:

From here. A few other Speedorz Summer sets are on the site, too.

Thanks! maybe there will be more and more tribes, not only 8

.. just find out what minifigures we'll get in 4 speedorz sets. , not the models Here they are:

Skunk Attack 70107 : Skinnet

Royal Roost 70108 : Lagravis

Whirling Vines 70109: Gorzan

Sky Joust 70114 :Rawzom and Eris

I hope we will get more information and pictures for the whole summer wave soon

Edited January 5, 2013 by Scy

[Kai NRG]

...Sky Joust 70114 :Rawzom and Eris...

Rawzom and Eris!

Whirling Vines sounds nice too!

[Jackattack7]

Skunks??!! And Lagaris sounds like a lion, maybe the one in the lion chi temple or the king.

[Pulp Detective]

Skunks??!! And Lagaris sounds like a lion, maybe the one in the lion chi temple or the king.

Lagaris is the King of the Lions and he's also Laval's father.

[Shakar]

Good to know there's going to be a cheaper set that features Rawzom. Hopefully that'll make his price drop on BL.

As for the voices, I excepted them to sound like they're in their 20s since that seems roughly the standard age for fairy tale/fantasy princes. That said, Laval's is pretty good but Cragger's is a bit too squeaky. For some reason I'm fearing the Ravens are getting comical high pitched voices- I hope I'm wrong..

[Kalhiki]

Maybe Cragger's voice will change? Most voice actors have quite the range.

Skunk tribe, eh? With that addition, we would have an odd number of tribes making the balance of good and evil tribes off. So, I predict that we'll get another tribe somewhere along the line (elephants, please).

Kalhiki

[Jaller8240]

I'm actually hoping for a raven to sound like Transformers: Prime Starscream.

[Perry the Platypus]

Yes, a Speedorz set with Eris! Eris is my favorite character.

I also love that we are getting bears, rhinos, and skunks. Move over, Ninjago; Chima is my new favorite theme!

[Jackattack7]

I want a shark tribe, remember the Atlantis shark warriors.

[Kai NRG]

I want a shark tribe, remember the Atlantis shark warriors.

Kind of doubt there would be one (tribe), because sharks only go in water. It's true that crocs are mainly water creatures, but they can survive on land quite easily.

[Faefrost]

That's kinda interesting that you got the preliminary design, just2good. Mine has leg prints that don't line up with the torso at the belt buckle. I digress with that, however if it were a dress piece, in say Ewald's robe, then I would be a tad irritated by it, especially since he's an exclusive minifig.

It wouldn't be the first time that some test shots ended up accidentally filed in a regular parts been and put in sets. It's rare but we have seen it pop up occasionally.

[just2good]

Ah yes! Those new Speedorz sound awesome! I want some skunks.

[DraikNova]

So we've got:

• Lions
  
• Crocodiles
  
• Eagles
  
• Ravens
  
• Gorillas
  
• Wolves
  
• Skunks
  
• Rhinos
  
• Bears
  

I want a Frog Tribe next !

[DJ Bricks]

I want lizards, so I can have a figure for The Lizard.