empithree Posted November 13, 2012 Posted November 13, 2012 Thanks DarkKnight7. will try it out soon. Quote
DarkKnight7 Posted November 13, 2012 Author Posted November 13, 2012 (edited) No problem, empithree, would love to see how it turns out! As I was looking for an excuse to stop working tonight, I thought I'd take a pic and try a quick mock up of Ezio from Assassin's Creed II. Here's what I came up with (mind you, without hood or side cloak) Edited November 13, 2012 by DarkKnight7 Quote
CF Mitch Posted November 13, 2012 Posted November 13, 2012 Wow, that looks really fabulous Just one question about the 'flaps' covering his legs. Is that part attached to the torso-print and hanging over the legs, or actually printed on the legs-part as well? Oh and your Desmond decals are terrific too Regards, Mitch Quote
empithree Posted November 14, 2012 Posted November 14, 2012 Really nice outcome. Any chance of selling the ready made printed decal? ;) Quote
empithree Posted November 15, 2012 Posted November 15, 2012 idk if this the right place to post. But here my tryout . Altair , Ezio & Connor. Althought the ezio is a abit out of portion. Had to resize the width to 1.6cm Quote
DarkKnight7 Posted November 15, 2012 Author Posted November 15, 2012 (edited) idk if this the right place to post. But here my tryout . Altair , Ezio & Connor. Althought the ezio is a abit out of portion. Had to resize the width to 1.6cm This is definitely the right place and thanks for sharing these! It's great to see how people use these decals and how they actually turn out on the figs themselves! I would say the only difference I had with your own uses was the following: Altair - I decided to use light gray arms and he will have a white Lego material wrap around for the hanging down parts, Ezio - I used the same parts, but obviously I will have the leg portion printed directly on the legs and my design will also feature a small cape to go over the right side ( the figures left side) of the figure, and for Connor - I used a tan torso and the printing will go directly onto the legs (front and sides) - which I have to say looks awesome printed...I can't wait to show you all when the protyping is done how great Connor looks printed...and after I figure out (with professional guidance and help) how to do the wrap around for Connor. these differences in choice are the beauty behind customization, so awesome work and it was great to see! Also, I finished a quick mockup of Desmond today too, that I thought I'd share (though, I'm up in the air about if I like using Lego's jeans legs or if I should create my own...) Feedback and suggestions welcome!! Edited March 27, 2013 by DarkKnight7 Quote
empithree Posted November 16, 2012 Posted November 16, 2012 Thanks for the feedback. and yes i obviously forget about the detail on connor leg LOL. Btw nice desmond minifig. ;) Quote
Axis600 Posted November 16, 2012 Posted November 16, 2012 idk if this the right place to post. But here my tryout . Altair , Ezio & Connor. Althought the ezio is a abit out of portion. Had to resize the width to 1.6cm So that's how they look...well done, both of you. Quote
friedchikenfairy Posted November 18, 2012 Posted November 18, 2012 Ahh. I've finally found the time to create these little bad boys and decided to build a little MOC for them Well, here's a teaser for it (Hint: Involves Leap of Faiths) And again, fantastic decals Quote
DarkKnight7 Posted November 22, 2012 Author Posted November 22, 2012 Haytham Kenway has now been added as well at the beginning of the thread. I look forward to hearing your feedback and constructive criticism. Thanks, Quote
CF Mitch Posted November 22, 2012 Posted November 22, 2012 Great job, once again! His suit looks incredibly awesome and alike One question, though. Why the color difference? Or does that have to do with the clear- and nonclear decals? Regards, Mitch Quote
DarkKnight7 Posted November 23, 2012 Author Posted November 23, 2012 (edited) Great job, once again! His suit looks incredibly awesome and alike One question, though. Why the color difference? Or does that have to do with the clear- and nonclear decals? Regards, Mitch Hey Mitch, thanks, glad you liked it. As for the two colors, the issue is that the Haytham in the game has a very unique blue color that is not closely matched in Lego. Really, the closest would be the Dark Gray torsos, but his coat is an obvious shade of blue. So, for those that want accuracy to the game color, I thought I'd throw the one on the left in there, but if it is used, the user will have to personalize the torso through a similar paint or dye to the lego torso. But, for those just looking to mod a current color of Lego, the closest match would be the dark blue, so I provided a version on the right. And, as there is really no identification of what he has on his back, and due to the fact he is covered with capes, I didn't create a back design to go with his second face. Does this explanation make sense? if you guys have a good suggestion for how I should color Haytham, I'd be more than happy to hear it, as that was the greatest challenge with his design. Edited November 23, 2012 by DarkKnight7 Quote
RaincloudDustbin Posted November 30, 2012 Posted November 30, 2012 Bought AC 2, remembered this topic and checked it out immediately! Can't wait to try out Ezio! Quote
PsyKater Posted December 4, 2012 Posted December 4, 2012 Unfortunately the pictures are not showing up? Quote
Axis600 Posted December 5, 2012 Posted December 5, 2012 Unfortunately the pictures are not showing up? Ditto. I can't see the decals anymore Quote
CF Mitch Posted December 5, 2012 Posted December 5, 2012 Wow, crap. I completely forgot to check this topic for a while But yeah, your explanation makes a lot of sense, thanks Quote
DarkKnight7 Posted December 19, 2012 Author Posted December 19, 2012 Ditto. I can't see the decals anymore Yeah, I meant to get on here earlier, but things with the prints are moving fast and furious lately...on my end at least! As we are getting very close to offering these designs in print form, we are still working out the copyright issues involved, and for the time being, at least, I've decided to take them down. I apologize for this, but it was strongly suggested by several people who are in the know about this. If it is decided that it would not be an issue, which I would hope comes to be true, they may be put on here again. But, for now, I have to take them down for copyright reasons, etc. I will update you all if and when they are added again. For now...you can see a few previews of what we're working on at BrickArms Flickr page...(click the link below)...keep in mind, this is a prototype print and the print quality is being tweaked, along with the hoods (not shown here) and waistcoats (by MMCB Custom Capes) are being worked out, but it gives you an idea for where we may be going. Our hope is that they will be available by about January 2013! Connor in White (prototype) - BrickArms Flickr Along with that, I've started a Flickr page of my own (I know...finally, right?) and that will be where I'll post any updates on the prints and prototypes in the next few weeks, and in the future. Come check me out there. Phoenix Custom Bricks - Flickr Quote
teha123 Posted December 27, 2012 Posted December 27, 2012 Hi, i am new in this forum really love your assasins creed decals,but strange i cant seems to view it is it block? Quote
LuxorV Posted December 27, 2012 Posted December 27, 2012 Please read the post above yours, and you'll see they have been blocked due to copyright issues for now. Also, please check your grammar and spelling when posting; we are not in a rush here, so take a few more seconds and make sure your posts are easily readable. Thank you. Quote
Axis600 Posted December 28, 2012 Posted December 28, 2012 Yeah, I meant to get on here earlier, but things with the prints are moving fast and furious lately...on my end at least! As we are getting very close to offering these designs in print form, we are still working out the copyright issues involved, and for the time being, at least, I've decided to take them down. I apologize for this, but it was strongly suggested by several people who are in the know about this. If it is decided that it would not be an issue, which I would hope comes to be true, they may be put on here again. But, for now, I have to take them down for copyright reasons, etc. I will update you all if and when they are added again. For now...you can see a few previews of what we're working on at BrickArms Flickr page...(click the link below)...keep in mind, this is a prototype print and the print quality is being tweaked, along with the hoods (not shown here) and waistcoats (by MMCB Custom Capes) are being worked out, but it gives you an idea for where we may be going. Our hope is that they will be available by about January 2013! Connor in White (prototype) - BrickArms Flickr Along with that, I've started a Flickr page of my own (I know...finally, right?) and that will be where I'll post any updates on the prints and prototypes in the next few weeks, and in the future. Come check me out there. Phoenix Custom Bricks - Flickr I see. Well, you gotta do what you gotta do, right? I can't wait to where this goes Quote
Jamit Posted March 23, 2013 Posted March 23, 2013 (edited) When these decals first came out, I started working on an animation with them. I only kept at it for a couple days, so I didn't get too far. But I decided to post it to youtube, so here you guys can see the decals "in action" Edited March 23, 2013 by Jamit Quote
DarkKnight7 Posted March 27, 2013 Author Posted March 27, 2013 When these decals first came out, I started working on an animation with them. I only kept at it for a couple days, so I didn't get too far. But I decided to post it to youtube, so here you guys can see the decals "in action" Thanks for sharing that, Jamit! That would have been pretty cool to see a full version of! I'm sure it was a LOT of work, though, just to get to that stage. Appreciate the work you did! Quote
DarobaZ Posted November 8, 2013 Posted November 8, 2013 (edited) hi! these are my products Edited November 8, 2013 by DarobaZ Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.