HJR-Holland Posted February 10, 2015 Posted February 10, 2015 I'll take up the challenge! I'm not a quick builder, but I'll start with one soon - I was looking for a new walker to make anyway :) Quote
Commander Beltar Posted February 11, 2015 Posted February 11, 2015 (edited) I have built one relatively recently. Here's a pic: AT-MP Main Pic by EB: Commander Beltar, on Flickr Edited February 11, 2015 by Commander Beltar Quote
Sir Gareth Posted February 12, 2015 Posted February 12, 2015 (edited) What's the best scale for building Star Wars vehicles? Edited February 12, 2015 by Sir Gareth Quote
atlas Posted February 12, 2015 Posted February 12, 2015 (edited) It depends what you want to build. I try to build most things in minifig scale (roughly 3 studs = 1 metre), but for enormous things like an ISD I'd just build it in any size that looks nice. I should also add that building in minifigure scale comes with the advantage of having official lego pieces made specifically for whatever you're making at your disposal. Edited February 12, 2015 by atlas Quote
Sir Gareth Posted February 12, 2015 Posted February 12, 2015 What scale are most Star Wars sets? Quote
GuyDudeMan27 Posted February 12, 2015 Posted February 12, 2015 What scale are most Star Wars sets? Most are system scale, sometimes known as minifig scale. UCS sets are much larger, and certain ones (like the Slave 1) are in close to perfect minifig scale. Quote
LegoForumUser2121 Posted February 12, 2015 Posted February 12, 2015 so i was googling my lego sets out of curiosity and i found a set that i own that is selling between 90 and 211$ is it rare? it also says exclusive anniversary edition on the box Quote
GallardoLU Posted February 12, 2015 Posted February 12, 2015 Some people list sets that have never been opened at some insane prices (compared to original prices) 8017 used bounces around between $30 - $60 USD depending on figures included and overall condition of the set. so, it has maintained value well but its not unusually priced for a Star Wars set. Quote
LegoForumUser2121 Posted February 12, 2015 Posted February 12, 2015 Some people list sets that have never been opened at some insane prices (compared to original prices) 8017 used bounces around between $30 - $60 USD depending on figures included and overall condition of the set. so, it has maintained value well but its not unusually priced for a Star Wars set. so is it just worth $30-$60? and this is the minifigure that it comes with Quote
GallardoLU Posted February 12, 2015 Posted February 12, 2015 yes in general 30-60 for a used an opened set, un opened sets are up around 120. brickpicker is a good resource for getting a ballpark for sets (it assumes complete with figures and instructions) Link for 8017: http://www.brickpicker.com/bpms/set.cfm?set=8017-1 Quote
Lobot Posted February 12, 2015 Posted February 12, 2015 HiLegoForumUser2121, and welcome to Eurobricks! There's a general Star Wars Q & A thread pinned at the top of the forum; I'll merge this with it in a bit It's a nice little set, but Darth is definitely the main highlight! Quote
Sir Gareth Posted February 13, 2015 Posted February 13, 2015 (edited) It depends what you want to build. I try to build most things in minifig scale (roughly 3 studs = 1 metre), but for enormous things like an ISD I'd just build it in any size that looks nice. I should also add that building in minifigure scale comes with the advantage of having official lego pieces made specifically for whatever you're making at your disposal. Most are system scale, sometimes known as minifig scale. UCS sets are much larger, and certain ones (like the Slave 1) are in close to perfect minifig scale. Thanks, Atlas and GuyDudeMan27! So, if Minifig Scale is 1:40 and an AT-AT is 22 m tall, a Minifig Scale AT-AT would be 55 cm tall, right? Edited February 13, 2015 by Sir Gareth Quote
GuyDudeMan27 Posted February 13, 2015 Posted February 13, 2015 Thanks, Atlas and GuyDudeMan27! So, if Minifig Scale is 1:40 and an AT-AT is 22 m tall, a Minifig Scale AT-AT would be 55 cm tall, right? No problem. That sounds about right. Quote
atlas Posted February 13, 2015 Posted February 13, 2015 Several different AT-AT minifig scale mods have been made in Lego, cavegod's or Rocky's comes to mind. You can have a look by just googling 'cavegod at at', to get an idea. Quote
Fuppylodders Posted February 13, 2015 Posted February 13, 2015 Thanks, Atlas and GuyDudeMan27! So, if Minifig Scale is 1:40 and an AT-AT is 22 m tall, a Minifig Scale AT-AT would be 55 cm tall, right? Mine is literally about 55-60cm tall (Ive just decided I need to reduce the height of the central section of the body by either 2 plates or 1 brick height) and was designed to be minifig scale as close as possible. That height will work well providing the proportions of its entirety are matched ^_^ Quote
AudiBobaR5-D2 Posted February 13, 2015 Posted February 13, 2015 Does anyone know how I can find the right parts needed (or at least near accurate) for a Senator Palpatine from TPM? Thanks in advanced Quote
GuyDudeMan27 Posted February 14, 2015 Posted February 14, 2015 Does anyone know how I can find the right parts needed (or at least near accurate) for a Senator Palpatine from TPM? Thanks in advanced I'd look through a minifig list on BrickLink, and then add them to your wanted list. Quote
Krusi86 Posted February 14, 2015 Posted February 14, 2015 Like what i have seen didnt find it in the moc pages thoug But i found at-ar all terrain advance raider witch might be a good challenge Quote
Lobot Posted February 15, 2015 Posted February 15, 2015 Hi Krusi86, and welcome to Eurobricks! For future reference, there's a general SW Q&A thread pinned to the top of the forum. I'll merge this thread with it in a bit Quote
Lukasguy Posted February 15, 2015 Posted February 15, 2015 Hello I'm thinking about bricklinking the USC ISD. According to rebrickable I already have 67% of the used parts. Can anybody give me some tips about bricklinking this set? Thanks Quote
jamie75 Posted February 15, 2015 Posted February 15, 2015 (edited) A couple fo things to consider. 1) Color, is it Light Gray or Light Bluish Gray. Light Gray parts are more expensive. 2) Parts, If you have the wheels used for the engines, the magnets and magnet holders, the wash tubs for the engines and the parts for the globes on the top of the ship. It's not a hard or expensive set to bricklink. But, if your missing any of these, it going to get expensive. The wheels used for the engines start at $30 and go up from there. You need 3 of these. The magnets are cheap, starting at .35¢, but, you need 28 of these. The holder for the magnets get pricey, there are 2 different types used in the ISD. One is cheap and easy to find, starting at about .05¢, but the other is hard to get and starts at about $8 each and you need 14 of them. The wash tubs used for the engines start at about $10 each. The globes on the top of the ship are 2 pieces. The bottom starts at about $48 and the top is about a $1. If you have these, go for it. If you missing some, see what you have versues what you need. If you missing all or most of these. I wouldn't suggest it. But, that's me. Good luck, Jamie Edited February 15, 2015 by jamie75 Quote
atlas Posted February 16, 2015 Posted February 16, 2015 I have a question that I would really like answered if possible. Does anyone know what is going on with the availability of the new Lego sets in australia? Only the AAT, gunship and the skyhopper are on sale anywhere. I'm worried . . . Quote
Lukasguy Posted February 16, 2015 Posted February 16, 2015 I have found that the Light gray parts are cheaper than the light bluish gray parts :/ I don't have enough magnets so i'll have to buy some more of those but I can use a different color for the holders because you can't see these so I won't mind. From the expensive parts I have none :( But I could buy them in a different color and paint these to get a nice result. I have found all these parts to be really cheap in a different color. Any tips on colouring these? Thanks for the help :) Quote
Chills Posted February 16, 2015 Posted February 16, 2015 Wow, those are expensive! Were those pricey parts used in any other sets (same color) besides 10030? Good luck, Lukasguy. This is one of my very favorite sets. It is an amazing display piece. Quote
Lukasguy Posted February 16, 2015 Posted February 16, 2015 Thanks, I have found these parts in a lot of colors and I won't mind painting them to the color I need. I have seen your room and I must say it's epic. Now I'm busy getting all the parts that I have laying around and I'll order the ones I need when I'm done. Any tips for getting the cheapest prices on bricklink? Thanks for your interest. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.