HanShotFirst Posted January 16, 2014 Posted January 16, 2014 Hey, I've been bricklinking the UCS Falcon from 2007 and have seen a lot of mods. I usually mod stuff that I bricklink, and was looking for inspiration. If you've modded one and want to share what you've done/know of a modded one, post it here. Here's what I've seen: http://farm7.staticflickr.com/6036/7001072249_69b17c62c1_c.jpg http://farm8.staticflickr.com/7176/7001103569_d5fe095706_c.jpg http://farm8.staticflickr.com/7240/6854949508_5ff51e7126_c.jpg From this post: http://www.eurobricks.com/forum/index.php?showtopic=67628 Aall of the ones from here: http://www.fbtbforums.net/viewtopic.php?t=24351&highlight=&sid=1cb916fc337648b35f11e5562df6641 This photo set: https://www.flickr.com/photos/marshal-banana/4757411621/in/set-72157622309088161/ http://www.brickshelf.com/cgi-bin/gallery.cgi?i=2879037 http://www.ebay.com/itm/Lego-Star-Wars-Ultimate-Millennium-Falcon-10179-Custom-BLACK-New-100-complete-/111120232218?pt=Building_Toys_US&hash=item19df482f1a&afsrc=1&nma=true&si=zCBtGZV2pHpPZ0kSGnGFAEt4cCg%253D&orig_cvip=true&rt=nc&_trksid=p2047675.l2557 At the risk of repeating myself, http://www.eurobricks.com/forum/index.php?showtopic=38627 http://www.mocpages.com/moc.php/45629 http://www.mocpages.com/moc.php/299502 http://www.eurobricks.com/forum/index.php?showtopic=81759 and the stuff on this page: http://www.eurobricks.com/forum/index.php?showtopic=89683&st=25 Post if you know of anything else... Quote
ScottishDave Posted January 16, 2014 Posted January 16, 2014 Great idea! I've been collecting references for a while now. You got most of the good UCS Mods which I know of, plus some others I hadn't seen before. Here are a couple more: Brickplumber's interior Brian Hasting's interior flicker404's exterior mods Quote
HanShotFirst Posted January 16, 2014 Author Posted January 16, 2014 Great idea! I've been collecting references for a while now. You got most of the good UCS Mods which I know of, plus some others I hadn't seen before. Here are a couple more: Brickplumber's interior Brian Hasting's interior flicker404's exterior mods I hadn't seen those, nice find! Quote
Fuppylodders Posted January 17, 2014 Posted January 17, 2014 Im surprised this thread hasn't been started earlier! Great idea! I'll certainly be looking this thread up when I start bricklinking mine =D Quote
HanShotFirst Posted January 17, 2014 Author Posted January 17, 2014 Im surprised this thread hasn't been started earlier! Great idea! I'll certainly be looking this thread up when I start bricklinking mine =D Glad I could help. It's a challenge to BL this thing, but you appreciate the final result so much more... Quote
ScottishDave Posted January 19, 2014 Posted January 19, 2014 (edited) If you've modded one and want to share what you've done/know of a modded one, post it here. Since you asked so nicely, HanShotFirst... On second thoughts: to avoid swamping this [highly useful] index, I'll post this in a new topic. Edited January 19, 2014 by ScottishDave Quote
HanShotFirst Posted January 20, 2014 Author Posted January 20, 2014 Since you asked so nicely, HanShotFirst... On second thoughts: to avoid swamping this [highly useful] index, I'll post this in a new topic. Nice…the quality of that MOC is phenomenal! I like the lighting. What's the trans green piece in the first pic? Quote
ScottishDave Posted January 20, 2014 Posted January 20, 2014 Nice…the quality of that MOC is phenomenal! I like the lighting. What's the trans green piece in the first pic? Thanks! Do you mean the green 1x1 round trans-green plates lining the corridors? They are representing the Falcon's corridor lighting, as seen on this render of the Falcon's corridors (I can't find a decent still from the film). Quote
HanShotFirst Posted January 20, 2014 Author Posted January 20, 2014 (edited) Thanks! Do you mean the green 1x1 round trans-green plates lining the corridors? They are representing the Falcon's corridor lighting, as seen on this render of the Falcon's corridors (I can't find a decent still from the film). Yeah, that's it. I meant the 2nd pic, not the first. I see it now. I love what you did with the radar dish, too...much better than anything I've come up with! Edited January 20, 2014 by HanShotFirst Quote
ScottishDave Posted January 20, 2014 Posted January 20, 2014 I love what you did with the radar dish Thanks! I got the basic idea from Mike Psiaki's (non-UCS) Falcon. I wasn't sure about using the droid arms at first, but they are growing on me. I'm pretty happy that I got the shape and look of the central dome right. However, I am thinking of using OceanBlue77's radar dish stand, as from the pictures I've seen, it is even more accurate than Mike's... Quote
rahservizi Posted March 28, 2015 Posted March 28, 2015 I'm considering this mod: what piece you think was used for the double bar for the steering axles of the flaps, it looks to me too short to be the bar used as sword that is 4 stud long (30374 on bricklink)? Quote
ScottishDave Posted March 28, 2015 Posted March 28, 2015 (edited) I'm considering this mod: what piece you think was used for the double bar for the steering axles of the flaps, it looks to me too short to be the bar used as sword that is 4 stud long (30374 on bricklink)? Ah yes, OceanBlue72's engine mod! It's a great one, and the rest of his mods are worth checking out too if you like that sort of thing. I recreated this exact mod a few years ago. It definitely is the 30374 which is pictured. To my eyes, the bars look too long in this photo. You might want to consider the Bar 3L instead: http://www.bricklink...colorID=86&in=A This mod is very delicate in it's original form, and very tricky to get right. I redid it about a year ago, taking advantage of my curved engine mod, to proudce a simpler and much stronger version: I replaced half the 2x2 plates on top of my engine mod with 2x2 tiles, then alternated 4x8 plates with 4 x 9 wedge plates (or without stud notches - doesn't matter). For the underside, I used 4x4 plates, and held them on using "O" clip plates. in a 180 SNOT configuration. However, as with OceanBlue72's mod, individual bottom plates fall off too easily - I'm getting fed up putting them back on. I am currently considering how to strengthen this: I'm thinking hinge plates, like Brian Tobin's falcon or 1x3 tile plates (on order) to go under the rear hull plates. I have the Falcon in bits in front of me right now, so if you more information, or detailed photos of the construction, now is a good time to ask! Edited March 28, 2015 by ScottishDave Quote
rahservizi Posted March 28, 2015 Posted March 28, 2015 With all the photo on flicker along with your explanations I think I have a clear idea of the mods. Now I would look accurately at the panels for the rear hull angle mod, I would know wich pieces I need over the original ones I have. Thank you. Quote
ScottishDave Posted March 28, 2015 Posted March 28, 2015 With all the photo on flicker along with your explanations I think I have a clear idea of the mods. Good, glad to help. Now I would look accurately at the panels for the rear hull angle mod, I would know wich pieces I need over the original ones I have. Thank you. You mean, this, I take it? From memory: for the rear engine deck, its mostly 3x12 wedge plates (8 of each type), a few plates & 1 x 4 hinge plates underneath (as seen here) and a few extra bits for detailing. I took most of the existing detail from the existing engine deck as-is and moved it onto the new one. For the mid-rear quarters, with the greebly cutouts... well. It's hard to say what extra bits you need. Take a close look at the photo. You need all the parts you can see there, plus all sorts of plates to hold it all together underneath and more 1x4 hinges. It's a mess underneath, but it works. Let me know if you need any more photos. Quote
Boettner Builds Posted March 29, 2015 Posted March 29, 2015 This will be helpful when I finish BL'ing my Falcon!! Thank You! Quote
rahservizi Posted March 29, 2015 Posted March 29, 2015 Thank you ScottishDave, all your explanations are a big help. I'm already working on the pieces order list. ;-) Quote
rahservizi Posted April 24, 2015 Posted April 24, 2015 (edited) I didn't find the last side plate of the flaps: it seems a wedge plate 4x7. Any idea? Dave, please help. Edited April 24, 2015 by rahservizi Quote
Lobot Posted April 24, 2015 Posted April 24, 2015 Hi, Isn't that just a 2x4 Plate (part 3020) and a 4x4 Plate Cut corner (part 30503) that are joined together? Quote
rahservizi Posted April 24, 2015 Posted April 24, 2015 Hi, Isn't that just a 2x4 Plate (part 3020) and a 4x4 Plate Cut corner (part 30503) that are joined together? I analized a few photo zooming and it seemed a single piece but you are right, it is as you said, it is obvious now: probably i'm a little tired today ;-) Quote
Lobot Posted April 25, 2015 Posted April 25, 2015 I analized a few photo zooming and it seemed a single piece but you are right, it is as you said, it is obvious now: probably i'm a little tired today ;-) I've spent far too much time trawling through Bricklink during the last couple of years, I think I need to get another hobby! Quote
ScottishDave Posted April 25, 2015 Posted April 25, 2015 (edited) Hi, Isn't that just a 2x4 Plate (part 3020) and a 4x4 Plate Cut corner (part 30503) that are joined together? Yup, those are the ones. There's also a 1x4 plate (3710) between the pieces you identified. I recently finished the lower engine flaps, and I think you might find this useful: The lower flaps are designed to match the ones. I built the flaps themselves the same way as the upper ones, and mounted them on 4x4 plates. I then joined those plates to one another using hinge plates. Lastly I attached them to the curved engine block using modified 1x1 plates with thick "o" rings. It's a Snot 180 technique which can be seen on this wiki page I also built a new curved piece of hull to go between the new flaps and the landing bay housing: To save you tearing your hair out analysing this one, the LXF for this part is here Note (on the LXF) the use of "old style" hinge plates as 180-snot joiners. You have to use these, I'm afraid, in place of the original clips and hinges, to get the new section a crucial half-plates-thickness lower. You'll also have to replace a left and right wedge brick with a pair of 2x3 wedge plates and a 1x3 plate to allow the new piece to "slot in" to the landing bay housing. The end result is very rigid and strong, and easily bears some of the weight of the engine section. Engine room interior: Totally made up, of course. You never, ever see this place in the film, so me and the kids let our imaginations run riot. The main goal was playability: the minifigs have to be able to "maintain" the engines. Note the battery box in the corner. This is the one that powers the LED strip in the engines which makes them light up. It's usually covered with a brickbuilt greebly piece. Edited: spelling. Edited April 25, 2015 by ScottishDave Quote
Lobot Posted April 25, 2015 Posted April 25, 2015 That's amazing ScottishDave, and far better than the original set. I really like the design of your engines, they look suitably chaotic and are crammed with details. If you're interested in the Hyperdrives, there's a drawing of one in the Haynes worshop manual for the Falcon! To be honest, I'm not sure if it's based on anything, but it's quite an interesting design Quote
ScottishDave Posted April 25, 2015 Posted April 25, 2015 That's amazing ScottishDave, and far better than the original set. I really like the design of your engines, they look suitably chaotic and are crammed with details. If you're interested in the Hyperdrives, there's a drawing of one in the Haynes worshop manual for the Falcon! To be honest, I'm not sure if it's based on anything, but it's quite an interesting design Thanks for the comments and the suggestion . Going by TESB, I suspect that the Hyperdrive is threaded through the ship, and so intertwined with the other ship's systems that it is impossible to debug without tearing half the ship apart. I'd be very surprised if there was a single neat box labelled "Hyperdrive" in the Falcon's engine room (and if there was, it would probably be Han's espresso machine). It's all hypothetical, of course, and I can only hope that JJ sets some scenes in this area come December . Quote
rahservizi Posted April 26, 2015 Posted April 26, 2015 Excellent work Dave, and I like engine interior a lot. To join the 4x4 plates is a good idea: did they stop falling? Quote
ScottishDave Posted April 26, 2015 Posted April 26, 2015 Yes, joining the 4x4 plates with the hinges stopped them dropping off at a touch :-) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.