KirTech LAB Posted February 20, 2014 Posted February 20, 2014 (edited) Hello All! Some time I was out from EB, but I’ve come back with new MOC :) I had short of time that’s why its construction took about two monthes. This is my tuning-version of legendary Ferrari Enzo. The scale is 1:8.5 (length – 58.5 cm, width – 24 cm, height – 13 cm), total weight – 3.6 kg. Design combines various features of original Ferrari, tuning-versions Edo Competition, MIG-U1 and my own ideas. There are six RC functions in it: - moving – 2 x XL; - acceleration – 2 x XL; - two-stage gearbox (pneumatic-controlled) – 1 x Servo; - adders locking (pneumatic-controlled) – 1 x Servo; - steering – 1 x Servo; - clearance adjustment (four large pneumatic cylinders) – 1 x M. The scale is approximate with respect to wheels. Front wheels – 81.6 mm from 42000, rear – more aggressive tires from 8461. The transmission differs from original one. For better playability and transmission load decreasing i’ve mounted AWD. In the same time central differential gear is an output gear of gearbox. Two-stage gearbox allows to drive both on the flat surface and on slight off-road. I’ve mounted two air tanks to decrease switching time. The acceleration is realized on adders (two parallel circuits for reliability increasing). The adders can be locked. Instead of velocity locked adders sums the torque. The next feature of my model is adjustable clearance on both axles (original Ferrari Enzo has only front axle lift). Vertical rods was replaced by shock absorbers and pneumatic cylinders are mounted at horizontal angle. There is an adaptive aerodynamic element in my model – it is rear spoiler that is switched simultaneously with gear box. The model has detailed cabin The movie: Thanks for watching! Edited February 24, 2020 by desert752 Quote
unimog123 Posted February 20, 2014 Posted February 20, 2014 This is unbelievably amazing!! Can't wait for the video. Great Job! Quote
Choops Posted February 20, 2014 Posted February 20, 2014 Great work. Headlights are cool. Steve Quote
timslegos Posted February 20, 2014 Posted February 20, 2014 Wow I am impressed with all the details you added in! I am especially interested with the adder setup you were describing. Would you mind explaining it a little more to me? tim Quote
Freekysch Posted February 20, 2014 Posted February 20, 2014 Woow, i am amazed. This is a great mix between Technic and normal Lego ! Quote
Zerobricks Posted February 20, 2014 Posted February 20, 2014 Wow. What a good looking, yet complex model! Quote
KirTech LAB Posted February 20, 2014 Author Posted February 20, 2014 (edited) Thanks all!!! I am especially interested with the adder setup you were describing. Would you mind explaining it a little more to me? I use a differential gear as adder - normally we use it as "one input - two outputs", but if we connect one more motor to one of "outputs" than the axis on the second output will rotate with speed equal to "speed of motor 1" + "speed of motor 2". Sorry for my clumsy explanation - i'll find more clear one in technical literature or maybe somebody with better english will help me :) Edited October 13, 2015 by desert752 Quote
Rishab N Posted February 20, 2014 Posted February 20, 2014 Wow that is gorgeous! The amount of detail and complexity is amazing! The only thing i don't like is the green headlights Quote
fos4276 Posted February 20, 2014 Posted February 20, 2014 looks amazing, but it will look even better if you put some tiles over the plates, just my opinion though Quote
Hrafn Posted February 21, 2014 Posted February 21, 2014 Very nice, thank you for sharing it with us! How much is the final vehicle slowed down by the additional weight of the bodywork? Quote
Graydingo Posted February 21, 2014 Posted February 21, 2014 +1 for tiles on the doors and green headlight delete. Amazing work! Quote
JTS Posted February 21, 2014 Posted February 21, 2014 Fantastic work! I'm most impressed that you managed to build a studded model an odd number of studs wide! Quote
skriblez Posted February 21, 2014 Posted February 21, 2014 This is awesome looking! Really like the pneumatic raising of the car :) Quote
Lakop Posted February 21, 2014 Posted February 21, 2014 Brilliant! The body and chasis are complicated enough without the added features. You've packed a lot in there. Well done and thanks for sharing your diagrams. You need to put that in brickshelf. H Quote
KirTech LAB Posted February 21, 2014 Author Posted February 21, 2014 Thanks for comments! I'll try to answer :) The only thing i don't like is the green headlights Yes, i had some doubts about it but lime strips improoved its perception. Now i am waiting for a BL order with other windscreens - maybe i'll create something better when i'll get it! looks amazing, but it will look even better if you put some tiles over the plates, just my opinion though I think the model will be more "square" with tiles... in any case i haven't enough tiles to cover entire model :( How much is the final vehicle slowed down by the additional weight of the bodywork? Not so dramatically as i expected - XL-motors is a real power :) Quote
Karimix Posted February 21, 2014 Posted February 21, 2014 One of the best Lego Technic Supercars I have seen on while! Impressive work, thanks for sharing. Quote
0RBlT Posted February 22, 2014 Posted February 22, 2014 Hello! Tell me please, I'm in a series Technic beginner and do not quite understand how you manage remotely pneumatics? Using servo motors? On this model you used all available channels 8 PF or there is what is the secret? Quote
KirTech LAB Posted February 22, 2014 Author Posted February 22, 2014 (edited) Hello! Tell me please, I'm in a series Technic beginner and do not quite understand how you manage remotely pneumatics? Using servo motors? On this model you used all available channels 8 PF or there is what is the secret? In this model i use two variants of RC valves - servo-motor works fast, so i use it for gear shifting (i control it by using RC unit with speed control). M-motor is used for car lifting. Yes, i use all eight channels - 4 XL motors (one motor per channel) and other four functions takes remained channels. One of the best Lego Technic Supercars I have seen on while! Impressive work, thanks for sharing. Thanks :) Edited October 13, 2015 by desert752 Quote
0RBlT Posted February 22, 2014 Posted February 22, 2014 In this model i use two variants of RC valves - servo-motor works fast, so i use it for gear shifting (i control it by using RC unit with speed control). M-motor is used for car lifting. Yes, i use all eight channels - 4 XL motors (one motor per channel) and other four functions takes remained channels. Thanks :) I think I just beginning to understand that as a yes. But I did not converge with the function of channels PF! If you have a transmission with low and high gear ratio, why waste one channel in separate motors for acceleration? And you have a very difficult box for vsegolish two speeds! Wanted to say thanks on this forum people are more hospitable and open, willing to help and share their ideas. It is very nice! Quote
KirTech LAB Posted February 24, 2014 Author Posted February 24, 2014 If you have a transmission with low and high gear ratio, why waste one channel in separate motors for acceleration? And you have a very difficult box for vsegolish two speeds! This transmission gives a little more than simple two speeds. In fact here we have four speeds (low,low+acceleration,high,high+acceleration). For example to get "low+acc" speed from "low" speed we don't need any gear shifting so model don't slows down before acceleration. In addition we can increase a torque and it can improve flotation or, for instance, works like a handbrake on slopes as shown in the first video. Quote
KirTech LAB Posted February 26, 2014 Author Posted February 26, 2014 (edited) I've created a video-demonstration of this model... hope you like it! Thanks for watching! Edited October 31, 2014 by desert752 Quote
unimog123 Posted February 26, 2014 Posted February 26, 2014 I don't know if you have seen it already, but I suggested this exceptional MOC to The Lego Car Blog and it was excepted. Here's the link: http://thelegocarblog.com/2014/02/25/technic-tuesday/ Great job once again! Quote
Lost_In_Noise Posted February 26, 2014 Posted February 26, 2014 What excellent work. Absolutely stunning, and I love the flappy-pedal gearbox:) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.