If past releases of Xinh are anything to go by, they will be the actual appearance of the figures :)

No, past releases of Xinh were:

1st-preview of the figures with real lego / renders

2nd- after a few days, the previews change to see actual figure photos

We all hope dual moulded legs. Xinh and Decool have made dual molded helmets, so maybe it's closer than ever

The thick cape should be the giveaway that it's just the genuine Lego figure in the shots. I think some of the SW images actually still had the Lego logo on the side of the blasters visible.

If they did dual moulding that would be great as a cheaper way of getting them... I would just hope they would offer different colour variations to official Lego stuff such as red/yellow legs for Flash etc.

If nothing else getting Supes hair at a cheap cost would be good also.

I think people are misunderstanding me :) I stated they would be the actual "appearance" as in from what I have seen, Xinh has never done a jlb by releasing a product vastly different than what they show.

Does anyone else not really like dual molded legs for most figures. I love the idea, but the boots always look too high for my liking.

The thick cape should be the giveaway that it's just the genuine Lego figure in the shots.

If they did dual moulding that would be great as a cheaper way of getting them... I would just hope they would offer different colour variations to official Lego stuff such as red/yellow legs for Flash etc.

If nothing else getting Supes hair at a cheap cost would be good also.

Yeah, that thick cape is the major clue they were using official TLG official pics. I totally agree Rob, if they do dual molded legs, would be a great resource esp. if they do a variety of color combos not yet released officially.

Does anyone else not really like dual molded legs for most figures. I love the idea, but the boots always look too high for my liking.

Yeah, but its more of a case of taking what you can get. I also agree that the boots are a tad high, but its certainly better than nothing.

Edited March 15, 20168 yr by agoodfella77

Does anyone else not really like dual molded legs for most figures. I love the idea, but the boots always look too high for my liking.

I hate the gap when boots are printed much more.

hey guys, I received that pogo red trooper, helmet mould was misaligned so I scraped it with a cutter and used some fine sandpaper. it's better now but i need to recover some luster, do you have a tip to polish plastic?

Has anyone heard anything more about the Wange Modular Buildings?

Who is xinh 223? And i dont think the figs will have twomoulded legs btw. When are bootleggers capable of doing so.

I think its Aquaman from the new DC cinematic universe.

SY610 NICK KNIGHTS (lol)

No bots. :( I hoped they will release bootleg versions of the little bots that are in every Nexo Knights sets. I love those guys!

hey guys, I received that pogo red trooper, helmet mould was misaligned so I scraped it with a cutter and used some fine sandpaper. it's better now but i need to recover some luster, do you have a tip to polish plastic?

I use a polishing cloth made called micro mesh, came across it through the industry i work in(gas turbine engines) it comes in many grades and can get a really great finish!! Not cheap but if you search ebay y8u should find some polishing boards(like nail files) these have several grades to achieve a high finish

Hope this helps

nail file! that's a good idea.

for now, I used some acetone on a q-tip, it melted the plastic and clear the rough edges. it's still not perfect but i'm close...

(what a waste on time, it's my first and last POGO figure)

Had a few pogo figs now, always seems to be a bit of excess molding on legs, but its easy removed with a craft knife, i have a pipe deburring tool to do inside the leg holes, this makes them look okay, one arrived with a very damaged head(puncture marks from a knife!!!!) seller refunded that one tho, the rest are okay not the best but useable for army building!!! The robin figure with motorbike was very dull on the torso but the rest was good and the bike was pretty awesome!!!

Has anybody seen the bootleg Dark Phoenix by Doll? I can't track it down for the life of me.

Has anybody seen the bootleg Dark Phoenix by Doll? I can't track it down for the life of me.

It's been off the market for quite some time now, they've stopped producing that set

Has anybody seen the bootleg Dark Phoenix by Doll? I can't track it down for the life of me.

It's been off the market for quite some time now, they've stopped producing that set

And i thought it was quite expensive back then, so i missed it too. I was under the impression that she would show up in a decool or sy wave. Too bad she didn't.

Cut your losses and get this, that's what I did

http://m.ebay.co.uk/itm/Custom-Minifigure-Dark-Phoenix-Jean-Grey-Xmen-Superhero-Printed-on-LEGO-Parts-/191592503240?nav=SEARCH

About damn time. :)

By my count then, these are the only ones we need to get:

- Blue Steel

- Casanova

- Tank

- Sneaky

- Shades

- Gamma

- Southpaw

- Fiddler

Hmmm, really? What am I missing?

The ones I have tracked before this new set were:

Tony Stark - Decool 0160 

     + MK I. Iron Man 1, grey bulky armour - Decool 168

     + MK II. Iron Man 1, grey round chest repulsor - SY 179

     + Mk III. Iron Man 1, round chest repulsor long red legs - SY 161

     + Mk IV. Iron Man 2, round chest repulsor short red legs/long golden legs- Decool 162

     + MK V Suitcase armour. Iron Man 2, red and silver with exposed assemblage  - SY 179

     + MK VI. Iron Man 2, triangle chest repulsor - Decool 126

     + MK VII. Avengers, round chest, long revers V-shaped yellow+blue legs - SY 185  

     + MK XVI Nightclub. Iron Man 3, black armour  - SY 179

     + MK XVII HeartBreaker. iron Man 3, gold chest, blue round repulsor - SY 185

     + MK XIX Tiger. Iron Man 3, red with red band in mask  - Dargo TRANSPARENT

     + MK XX Python. Iron Man 3, blue and gold - SY 262-06

     + MK XXI Midas. Iron Man 3, full golden armour  - Decool 163

     + MK XXII Hot Rod. Iron Man 3, flamed legs  - SY 262-08

     + MK XXV Striker. Iron Man 3, grey, 2 chest plaques small rectangular chest repulsor (added claws)  - SY 262-04

     + MK XXVI Gamma. Iron Man 3, green with square chest (added claws)  - Dargo TRANSPARENT

     + MK XXVII Disco. Iron Man 3, blue with orange highlights  - DLP 9002

     + MK XXVIII Jack. Iron Man 3, orange with black pattern in mask   - Dargo TRANSPARENT 

     + MK XXXIII Silver Centurion. Iron Man 3, silver and red, triangle chest repulsor  - SY 179

     + MK XXXV Red Snapper. Iron Man 3, clasp hands  - SY 179

     + MK XXXVI Peacemaker. Iron Man 3, orange  - SY 262-05

     + MK XXXVII Hammerhead. Iron Man 3, green with round chest   - Dargo TRANSPARENT 

     + MK XXXVIII Igor. Iron Man 3, big blue  - Decool

     + MK XXXIX Gemini. Iron Man 3, white armour   - SY 179

     + MK XL Shotgun. Iron Man 3, grey square chest repulsor  - SY 179

     + MK XLI Bones. Iron Man 3, black and gold - SY 185

     + MK XLII. Iron Man 3, round chest repulsor & more gold than red. gold hands - Decool 105

          

     + MK XLIII. Avengers 2, round chest, layered red+gold chest, mostly yellow legs, top block lines on mask- DLP 9002

+ MK XLIV Hulkbuster. Avengers 2 - Decool 181

     + MK XLV. Avengers 2, round+pentagon chest, layered red+gold chest, angry mask (grey sides) - SY 271 / DLP 9002

So even with those new ones there are almost 20 missing. What's the catch?

Has anyone bought any of the SY microfighters?

Hmmm, really? What am I missing?

The ones I have tracked before this new set were:

Tony Stark - Decool 0160

+ MK I. Iron Man 1, grey bulky armour - Decool 168

+ MK II. Iron Man 1, grey round chest repulsor - SY 179

+ Mk III. Iron Man 1, round chest repulsor long red legs - SY 161

+ Mk IV. Iron Man 2, round chest repulsor short red legs/long golden legs- Decool 162

+ MK V Suitcase armour. Iron Man 2, red and silver with exposed assemblage - SY 179

+ MK VI. Iron Man 2, triangle chest repulsor - Decool 126

+ MK VII. Avengers, round chest, long revers V-shaped yellow+blue legs - SY 185

+ MK XVI Nightclub. Iron Man 3, black armour - SY 179

+ MK XVII HeartBreaker. iron Man 3, gold chest, blue round repulsor - SY 185

+ MK XIX Tiger. Iron Man 3, red with red band in mask - Dargo TRANSPARENT

+ MK XX Python. Iron Man 3, blue and gold - SY 262-06

+ MK XXI Midas. Iron Man 3, full golden armour - Decool 163

+ MK XXII Hot Rod. Iron Man 3, flamed legs - SY 262-08

+ MK XXV Striker. Iron Man 3, grey, 2 chest plaques small rectangular chest repulsor (added claws) - SY 262-04

+ MK XXVI Gamma. Iron Man 3, green with square chest (added claws) - Dargo TRANSPARENT

+ MK XXVII Disco. Iron Man 3, blue with orange highlights - DLP 9002

+ MK XXVIII Jack. Iron Man 3, orange with black pattern in mask - Dargo TRANSPARENT

+ MK XXXIII Silver Centurion. Iron Man 3, silver and red, triangle chest repulsor - SY 179

+ MK XXXV Red Snapper. Iron Man 3, clasp hands - SY 179

+ MK XXXVI Peacemaker. Iron Man 3, orange - SY 262-05

+ MK XXXVII Hammerhead. Iron Man 3, green with round chest - Dargo TRANSPARENT

+ MK XXXVIII Igor. Iron Man 3, big blue - Decool

+ MK XXXIX Gemini. Iron Man 3, white armour - SY 179

+ MK XL Shotgun. Iron Man 3, grey square chest repulsor - SY 179

+ MK XLI Bones. Iron Man 3, black and gold - SY 185

+ MK XLII. Iron Man 3, round chest repulsor & more gold than red. gold hands - Decool 105

+ MK XLIII. Avengers 2, round chest, layered red+gold chest, mostly yellow legs, top block lines on mask- DLP 9002

+ MK XLIV Hulkbuster. Avengers 2 - Decool 181

+ MK XLV. Avengers 2, round+pentagon chest, layered red+gold chest, angry mask (grey sides) - SY 271 / DLP 9002

So even with those new ones there are almost 20 missing. What's the catch?

I have this list without the transparents:

Iron Patriot - Decool 160-168 and SY

War Machine 1 - Decool 160-168

War Machine 2 - SY

Iron Lantern - SY262

MK 1616 Rescue Pepper Potts - SY179

MK Heroic Age - SY182

Iron Legion - SY275

Tony Stark - Decool 160-168

MK 1 Flamethower - Decool 160-168

MK 2 Prototype Flight - SY179

MK 3 Red and Gold - SY161

MK 4 MK3 Upgrade - Decool 160-168

MK 5 Football - SY262

MK 5 Suitcase - SY179

MK 6 Triangular Arc - SY185

MK 7 Circular Arc - SY185

MK 16 Night Club - Decool 160-168 and SY179

MK 17 Heartbreaker - SY185

MK 19 Tiger - SY?

MK 20 Python - SY262

MK 21 Midas - Decool 160-168 and SY605

MK 22 Hot Rod - SY262

MK 25 Striker - SY262

MK 27 Disco - SY605

MK 28 Jack - SY605

MK 29 Fiddler - SY605

MK 31 Piston - SY605

MK 32 Romeo - SY605

MK 33 Silver Centurion - SY179

MK 33 Silver Centurion LEGO Marvel Avengers Game - SY295

MK 35 Red Snapper² - Decool 160-168

MK 35 Red Snapper - SY179

MK 36 Peacemaker - SY262

MK 37 Hammerhead - SY605

MK 38 Igor - Decool 231

MK 39 Gemini - Decool 160-168 and SY179

MK 40 Shotgun - SY179

MK 41 Bones - SY185

MK 42 Extremis - SY185

MK 43 AOU v.1 - Decool 205-210

MK 44 Hulkbuster - Decool 181, SY and etc

MK 45 AOU v.2 - SY271

Edited March 15, 20168 yr by abby17

Cut your losses and get this, that's what I did

http://m.ebay.co.uk/...3240?nav=SEARCH

I've been sorely tempted, but if the other bootleggers are about to bring out new sets I'll feel stupid spending £10 instead of waiting a couple of months.

Has anyone bought any of the SY microfighters?

If you are talking about the Star wars ones, I've purchased most of them, and they are great. I had one lose piece on the star destroyer, but other than that they were all really solid. The figures are excellent as are the printed bricks. No stickers, thankfully.

If you are talking about the Star wars ones, I've purchased most of them, and they are great. I had one lose piece on the star destroyer, but other than that they were all really solid. The figures are excellent as are the printed bricks. No stickers, thankfully.

That's good to hear. I want to buy them for the clone pilots and phase II clones

Jango looks 100% like my genuine lego figure... wait for the real photos of that ;)

a new brand cloning SW sets. again...

Edited March 16, 20168 yr by briksen

A couple of points with regards to the Iron Man figs:

1) Marks 8 to 11 (are generally slight generic variations of the Mk 7 (red / gold), similarly, Marks 12 to 14 are generic steel based armors its not until Mark 15 (Sneaky) do you get a "name" variant which is unique (at least in my mind). In other words, from Mark 8 to 14 are really a mix of red/gold and steel variants which are unlikely to be made (although I must say Ramon did some nice stickers of some of these variants recently).

2) I never counted the transparent variants (although I can understand why others would -- its a personal choice).

Therefore, in my mind, we have (at least) 8 more unique "named" variants left to be released -- and I'm confident we will get those at some point. I would be happy to call it a day with those in my collection.

p.s. has anyone ever seen a Groot minifig (not the Big Fig) the one from SY257 sold as a single? Would appreciate a link if anyone has. thanks!

Edited March 17, 20168 yr by agoodfella77