On 8/9/2016 at 9:55 AM, Mark_24 said:

Please be good Dargo, you're our only hope, although hopefully Pogo can't print Manta THAT bad.

Who is in the sets with Blue Beetle and White Tiger ?

All new all Different Spider-man 2099 with Blue Beetle and Dr.Strange MCU(don't have cape) with White Tiger.

  On 8/9/2016 at 10:30 AM, mooproxy said:

Don't count on it - their track record isn't too great. That said, Pogo's quality seems to be on the up and up, so hopefully their wave will be up to scratch and they'll go on to release Ra's, Talia, Killer Moth, and the other new figures noone else has got round to yet. By the way, which version of batman is that in the Pogo wave?

from Batman Arkham Knight: Justice League 3000 Batman

Edited August 9, 20168 yr by beekini

Does anybody have a white Deadpool figure by Pogo?

I've seen lots of mentions of it, even convinced myself I own it, but the more I think about the more I'm doubting my own sanity. It doesn't fit in the Pogo numbering anywhere and I can't find the figure to compare to the other figures I own.

Somebody please put my mind at rest!

  On 8/9/2016 at 10:54 AM, wickedlemon said:

Does anybody have a white Deadpool figure by Pogo?

I've seen lots of mentions of it, even convinced myself I own it, but the more I think about the more I'm doubting my own sanity. It doesn't fit in the Pogo numbering anywhere and I can't find the figure to compare to the other figures I own.

Somebody please put my mind at rest!

Pogo don't have white Deadpool that from Xinh

New 52 superman finally!

Just noticed that joker is a copy of the one that came with the big tumbler

Cant wait to get riddler.

Edited August 9, 20168 yr by Mattyj82

  On 8/9/2016 at 10:54 AM, wickedlemon said:

Does anybody have a white Deadpool figure by Pogo?

I've seen lots of mentions of it, even convinced myself I own it, but the more I think about the more I'm doubting my own sanity. It doesn't fit in the Pogo numbering anywhere and I can't find the figure to compare to the other figures I own.

Somebody please put my mind at rest!

There was the KF version which also came out in a set from DLP, there was the Xinh version and then there was an M brand set of 6 I think (which is related to Pogo)

  On 8/9/2016 at 1:46 PM, MNW said:

There was the KF version which also came out in a set from DLP, there was the Xinh version and then there was an M brand set of 6 I think (which is related to Pogo)

One also came in the SY600 set.

Any links for new dargo set?

  On 8/9/2016 at 9:05 PM, Mattyj82 said:

Any links for new dargo set?

It's likely not released yet. Be careful about presales - they have a tendency to not arrive complete or not arrive at all. Wait until it's released and we have real photos - Dargo's quality can be dodgy at best.

  On 8/9/2016 at 11:18 AM, beekini said:

Pogo don't have white Deadpool that from Xinh

Thanks

So does this look about right for Pogo figures?

(Click for a bigger image)

  On 8/9/2016 at 9:09 PM, mooproxy said:

It's likely not released yet. Be careful about presales - they have a tendency to not arrive complete or not arrive at all. Wait until it's released and we have real photos - Dargo's quality can be dodgy at best.

POGO's molding can be pretty atrocious too.

It's also a shame dargo still hasn't followed through on that amazing list we saw before.

Edited August 10, 20168 yr by CaptvirgilHilts

Has any of these companies made a black suit Spider-Man or black suit Superman?

I think they made the rest of the SDCC figures.

Thanks, Jamie

  On 8/10/2016 at 5:48 AM, jamie75 said:

Has any of these companies made a black suit Spider-Man or black suit Superman?

I think they made the rest of the SDCC figures.

Thanks, Jamie

For the black suit Superman, there's this set I've ordered (not yet received):

http://www.aliexpress.com/item/8pcs-SUPER-MAN-DC-Universe-SUPER-HEROES-Avengers-Minifigures-Building-Blocks-Educational-Brick-Toy-Gift-Compatible/32495578054.html?spm=2114.13010608.0.83.wo90r2

The legs are not Lego-like, so I bought this Zod minifigure to swap the legs:

http://www.aliexpress.com/item/General-Zod-Minifigures-Marvel-Super-Heroes-The-Avengers-Building-Blocks-Sets-Model-Bricks-Toys-For-Children/32364590146.html?spm=2114.13010608.0.134.wo90r2

Track down one of the later SY sets with the various Superman figures. This has the best moulding and print on the black suit Superman:

Just add Zod legs with genuine head and hair and you're done.

Edited August 10, 20168 yr by Robianco

  On 8/10/2016 at 8:57 AM, Robianco said:

Track down one of the later SY sets with the various Superman figures. This has the best moulding and print on the black suit Superman:

Just add Zod legs with genuine head and hair and you're done.

Sy with a red sun supes?

  On 8/9/2016 at 10:44 PM, CaptvirgilHilts said:

It's also a shame dargo still hasn't followed through on that amazing list we saw before.

True, but in fairness we have seen a fair few of them produced by the likes of pogo and xinh.

  On 8/10/2016 at 8:57 AM, Robianco said:

Just add Zod legs with genuine head and hair and you're done.

Any chance you could point me in the direction of one of those sets? SY sets can be a bit of a minefield if you're looking for their older figures and don't want dodgy pieces.

Xinh are on a roll again...

  On 8/10/2016 at 10:40 AM, MNW said:

Xinh are on a roll again...

Only going to get the batman beyond. Wish i held off getting mr freeze haha.

I wouldn't bother. DLP did a very accurate Batman Beyond figure.

That's the DLP next to my Christo version.

The Xinh figure is actually a bootleg of a fake Batman release that was touted around last year, same as the Nurse Joker figure, hence the crap plastic cape design.

  On 8/10/2016 at 9:59 AM, Mattyj82 said:

Sy with a red sun supes?

The Red Son Supes is a pad printed custom. The only SY things there are the torso on the Black Suit Supes and the arms on the New 52 Supes on the right. That figure is by Phoenix Customs. Cyborg Superman is by P_O_S_T_Y and the Solar Suit is by Legomazing.

Edited August 10, 20168 yr by Robianco

I already got the dlp. The new one looks a little different.

  On 8/10/2016 at 11:10 AM, Mattyj82 said:

I already got the dlp. The new one looks a little different.

It's basically one of the original Batman line designs printed in red and black. It seems like there are some people working out of a factory in Mexico that put some pretty iffy figures out last year and circulated them... people jumped on them as early release figures but they weren't.

They were on eBay for a while but once people realised they weren't pre-release figures they died a death. Thankfully.

Some of them were even digital prints but people still thought they were Lego test figures. If Lego were to produce test figures digitally they wouldn't print hundreds, if not thousands of them then let them all disappear for sale on auction sites.

It wouldn't surprise me if they weren't the same people that circulated the Lex in Metropolis Prison Suit earlier this year as well as the Rebirth Batman design that was truly terrible up close.

Edited August 10, 20168 yr by Robianco

I've been trying to track down a good quality Zur-En-Arrh Batman as close to the SDCC one as possible. I came across this one, do you think it's one of the original Decool ones?

There's also this set. Kraven the Hunter seems to be a tweaked version of the offcial one

  On 8/10/2016 at 1:03 PM, Renzo649 said:

There's also this set. Kraven the Hunter seems to be a tweaked version of the offcial one

Is this avaliable from any seller?

  On 8/10/2016 at 1:03 PM, Renzo649 said:

There's also this set. Kraven the Hunter seems to be a tweaked version of the offcial one

That looks fantastic. It does, but Pogo just did a wave with a copy of the official one so worst case you could get that when it goes on single sale.

I promised myself I'd take a break from ordering minifigs to save a bit of money (and to hopefully get reprints of the zoom set) but all these releases aren't helping :/

Edited August 10, 20168 yr by mooproxy