MrLind Posted October 23, 2022 Posted October 23, 2022 Test adding a Link to Flickr IMG_2832.jpg by Mattias Lind, on Flickr Hope it works. Picture included. Url picture And text. Quote
Juliusz D Posted October 29, 2022 Posted October 29, 2022 (edited) F-4 Phantom – 5195 units produced, 63 years of production/service, dozens of monographs, modelling plans, etc., what can go wrong? Well, actually quite many things. Still, after a few setbacks, here it is, my latest model About the jet The history of McDonnell Douglas F-4 Phantom II started back in the mid 50’, with the first flight taking place on 27th May 1958. Initially, the F4H-1 (the initial designation before the tri-service unification) started as an unsolicited proposal from McDonnell Douglas, which actually didn’t get much interest. Only after the problems of other Navy fighters led to the necessity of acquiring a new general-purpose fighter, the Phantom as we know could get its chance. After winning the competition against the Vought’s F8U-3 Crusader III submission, the F4H-1 went to service in 1961, with a new designation of F-4B (starting in 1962). Even though F-4B was a revolutionary design for it time, it still had a number of deficiencies, with the most serious ones being slightly too high approach speed, and its AN-APQ-72 radar lacking the look-down, shoot-down capabilities, performing poorly against the ground clutter. As a consequence, after delivering 649 F-4B, in late 1966 McDonnell introduced a new, improved version – the F-4J. This version featured a revised and strengthened internal structure, more powerful J79-GE-10 engines (the smokeless, 10B version was introduced later in 1978), new, wider tires (resulting in bulges on the top part of the wings), a few aerodynamic improvements for decreasing the approach speed (changes to inboard leading edges and slotted stabilator), and most importantly, new AWG-10 radar, with solid-state elements and prominent look-down, shoot-down capabilities. The F-4J served through the Vietnam war until the late 70’, together with the F-4B, and later F-4N (upgraded F-4B). After that, starting from 1978, the selected 265 F-4J underwent an upgrade to F-4S standard (the initial idea was for 302, but the number was reduced), featuring smokeless J79-GE-10B engines, improved electronics, and leading-edge maneuvering slats, similar to those on USAF’s F-4E. In this variant, Phantoms served until 1987 in USN, and 1992 in USMC. In the meantime, 15 F-4J were also sold to UK, to fill the gap left by FGR. 2 Phantoms (F-4M) deployed to the Falkland Islands. These aircraft, known also as F-4J(UK) Phantom F.3s, served from 1984 to 1991. Interestingly, they were greatly appreciated by the RAF pilots, with most of them considering them superior to British Spey-engined variants, mainly due to the much faster response of the J-79 turbojets, in comparison to Rolls-Royce Spey 203 turbofans. About the building process While I’ve always appreciated the F-4, I was never a “Phantom Phanatic”. In fact, the idea for this model came to me by accident – I was a bit stuck with other projects, and thinking about different solutions, the idea that 2x3x1 curved slopes would make for an excellent Phantom fuselage went through my mind. I thought that these easy, boxy shapes of F-4 would make for a nice relax after the complex shapes of my F-14 and MiG-29, and so I started. Unfortunately, I made a huge mistake at the very beginning – I used the blueprints from the book, without validating their correctness first, which later cost me a lot of headaches. Before going further, I should mention some of the F-4 models by other people, which were a huge inspiration to me. Of course, there is an excellent F-4B by Mad Physicist, a beautiful F-4B by Carl Greatrix, and a whole series of different F-4s by Justin Davies. However, from the viewpoint of my model, three Phantoms were of particular importance to me. The first one is F-4N by Jonah Padberg. Even though I’ve ended with a very different cockpit design, I’ve started with the modification of his 3-stud wide canopy and angled cockpit section. The next model is a F-4B by Maks, who made an excellent, SNOT version of the Phantom, which to a large degree influenced some of my design choices. Lastly, there is a huge, 1/15 scale F-4J by crash_cramer, which might be my favorite LEGO model ever. Similarly, as in the case of my F-14 Tomcat, I tried to emulate some of his techniques in a smaller scale. The first assumption was to go for the 3-stud wide canopy, similar to my MiG-29. Such a solution is much more accurate in this scale and makes the model look much more realistic in my opinion. In fact, I’m so pleased with the outcome here that I will likely rebuild my F-14 in near future to a similar standard. The construction itself started with the wings. I’ve always come under impression that similarly to F-15, the angle for the leading edge is 45 degrees. Well, not really. Instead, the angle is 51 degrees, which effectively eliminates any plate-based solutions, leaving the brick-built wing as the only valid option. So instead of getting a nice, simple, sturdy 45 degrees wing, I had to go with a brick-built one, which combined with the main landing gear solution and folding mechanism, proved to be a nightmare. After figuring it out, the next challenge was to design the angled cockpit area. Here, the solutions from Jonah’s model were of great help. With those two pieces in place, the rest went relatively smoothly, leading to the stage presented in WiP pictures. And then, having 85% of the model ready, I checked the validity of my blueprints. I was able to get my hands on the original F-4 factory drawing on the Aviation Archives website, and all my drawings turned out to be off by a considerable margin. Fortunately, I’m not the only person dissatisfied with the quality of available blueprints, and I was able to find this awesome website, with a set of 100% accurate drawings, based on the factory ones, including the cross-sections. That was good news, the bad one was that my fuselage was too short, too high, and too wide. So I had to lower the whole fuselage by a plate, elongate it by 2 studs, and modify it from 10-stud wide, to 9-stud wide. Surprisingly, it wasn’t that hard, but after lowering the fuselage, it became evident that the angling of the front section is too steep. This, in turn, required a complete revision of the already most problematic section, consuming an awful lot of time. But after all these problems, I finally got a model, with which I am quite satisfied. About the model The model represents a McDonnell Douglas F-4J Phantom II in a 1/33 scale. The camouflage is based on the F-4J from VF-96 squadron, BuNo. 155800, callsign “Showtime100”, deployed on the USS Constellation aircraft carrier in Vietnam, around 1972. This particular aircraft, on the 10th of May 1972, was credited with 3 MiG-17 kills, being flown by pilot Lt Randy Cunningham and RIO Lt(jg) Willy Driscoll. This effectively made them the only Navy aces of the Vietnam war, as they already had 2 kills on their account. You may also note that they flew a “borrowed” plane, as the name on the cockpit is that of Lowell “Gus” Eggert, who later commanded the USS Constellation from 1974 onward. As usual, the model possesses a number of features: openable cockpits, working flaps, foldable wings, working horizontal and vertical tails, retractable landing gear and tailhook. I’m rather pleased with the functionality, as most of the features, especially the landing gear, are much more reliable than in e.g. my MiG-29. The loadout comprises 4 AIM-7E Sparrows, 4 AIM-9G Sidewinders, and a centerline 600 gal. fuel tank. Also, under the wings, there are outboard pylons for two 370 gal. fuel tanks, which are visible on some of the photos. The credit for the stand design goes to Jerac. There is a small discrepancy in the camouflage – in principle nearly all USN phantoms had an all-white underside, with an exception of some late 80s’, extremely dull, low-vis versions. Unfortunately, due to the brick-built nature of the wing, I was unable to make them white on the bottom. For a moment, I contemplated utilizing huge white stickers, but it wouldn’t look all that great, and it would make the wings extremely modification-unfriendly. Still, the final effect is not that bad. So, please enjoy, and let me know what is your opinion on this model. Flickr gallery Edited October 29, 2022 by Juliusz D Quote
Captainlegobrick Posted November 23, 2022 Posted November 23, 2022 (edited) Here's a picture someone tool of me 5 minutes ago, Captainlegobrick said: Here's a picture someone tool of me Edited November 23, 2022 by Captainlegobrick Quote
trabidoni Posted November 30, 2022 Posted November 30, 2022 [url=https://flic.kr/p/2o38qh8][img=https://live.staticflickr.com/65535/52532621887_39a8d9ca40_n.jpg][/url][url=https://flic.kr/p/2o38qh8]house[/url] by [url=https://www.flickr.com/photos/195192011@N02/]Dong hyuck KIM[/url], Flickr에서 Quote
trabidoni Posted November 30, 2022 Posted November 30, 2022 (edited) http://sincansen by Dong hyuck KIM, Flickr에서http://sincansen by Dong hyuck KIM, Flickr에서 ok i understand! Edited November 30, 2022 by trabidoni ok i understand! Quote
AZKerosene Posted December 26, 2022 Posted December 26, 2022 Testing. Testing. PXL_20221222_194847509 by azkerosene, on Flickr Quote
NilssonLegoEngineering Posted January 8, 2023 Posted January 8, 2023 (edited) Test Post: Lego Lego Spoiler The following may contain tests. Quote This is not really a quote, just a test. LS75104SUPERSET EDIT 1/7/2022 8:29 p.m.: Tested to see if EDIT function works Edited January 8, 2023 by NilssonLegoEngineering To test the edit function. Quote
unojasperm Posted January 21, 2023 Posted January 21, 2023 Test, test, why did it take so long to complete my registration? test.. Quote
jkupitz79 Posted January 21, 2023 Posted January 21, 2023 Greetings! I can't believe I never joined this site before! I need to experiment with linking image files because my pics are too big for this site. I have mocs to enter into the CSE contest, but haven't yet figured out how to do it. I can post a link from Flickr, right? Quote
EpicBrickBuilder Posted January 21, 2023 Posted January 21, 2023 Just a test post. Please ignore. Quote
EpicBrickBuilder Posted January 21, 2023 Posted January 21, 2023 Are there other ways to post Mocs besides getting a flicker account? Quote
Depalase Posted January 23, 2023 Posted January 23, 2023 This is the type of test when it is just a test Quote
Peppermint_M Posted January 23, 2023 Posted January 23, 2023 On 1/21/2023 at 11:36 PM, EpicBrickBuilder said: Are there other ways to post Mocs besides getting a flicker account? https://bricksafe.com/ This is a popular site for many builders. Quote
Deadied Posted January 24, 2023 Posted January 24, 2023 This is a test for a test when you need a test what the test shows when you test. Quote
CaptainDarkNStormy Posted January 25, 2023 Posted January 25, 2023 I'm testing out photo posting IMG_5194 by Chris Boyd, on Flickr One more for good luck IMG_5197 by Chris Boyd, on Flickr Quote
Alpha Bernini Posted January 26, 2023 Posted January 26, 2023 (edited) Hi, I’m Alpha Bernini, just signed in, and right now I’m practicing posting. Fett kursiv unterstrichen durchgestrichen OK, trying to embed a picture: Edited January 26, 2023 by Alpha Bernini Quote
Alpha Bernini Posted January 26, 2023 Posted January 26, 2023 15 minutes ago, Alpha Bernini said: Hi, I’m Alpha Bernini, just signed in, and right now I’m practicing posting. Fett kursiv unterstrichen durchgestrichen OK, trying to embed a picture: OK, this seems to work Quote
Alpha Bernini Posted January 27, 2023 Posted January 27, 2023 (edited) blablabla Bild: gjhlkjh einbetten 640 <a data-flickr-embed="true" href="https://www.flickr.com/photos/186393687@N04/52488956426/in/dateposted/" title="skull viper"><img src="https://live.staticflickr.com/65535/52488956426_f42d2ac1c9_z.jpg" width="640" height="427" alt="skull viper"></a><script async src="//embedr.flickr.com/assets/client-code.js" charset="utf-8"></script> Edited January 27, 2023 by Alpha Bernini Quote
MKJoshA Posted January 30, 2023 Posted January 30, 2023 On 1/27/2023 at 5:34 PM, Alpha Bernini said: blablabla Nice MOCs Alpha. I hope you'll come check out our Star Wars RPG. Quote
EvilZorlon Posted January 31, 2023 Posted January 31, 2023 Hi all, been hiding in the shadows for a while now and thought I'd try a test post :) Quote
FroggyShade Posted February 1, 2023 Posted February 1, 2023 Test post! Happy to be here, nothing much else to say. :) Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.