Captain Golden Hook Posted May 30, 2014 Posted May 30, 2014 hey everyone, after seeing sebeus's new wip frigate, i got inspired to build the redcoat counterpart of it. i wanted to use sebeus's tumblehome technique, but i soon found that it ended up with a rather flat side. so i paired it up with kurigan's idea to flex the broadside, and started building! However i got stuck on making the stern. I wondered if i could get some advice, for i am rather blank for ideas at the moment. Thank you! pics: image by captaingoldenhook, on Flickr image by captaingoldenhook, on Flickr image by captaingoldenhook, on Flickr you can see what the stern looks like now: image by captaingoldenhook, on Flickr Quote
Captain Braunsfeld Posted May 30, 2014 Posted May 30, 2014 Hi, not much space left for the stern. I am usually stuck with almost all other parts of the ship... The stern: From my point of view the stern does not have to be curved inwards like the rest of the ship. You may want to put a window to the left and the right, um, I mean, to starboard and larboard. Then everybody does that same approach by putting the back windows in slopingly. I tried a curved approach once which might look ok with your ship. However, it needs more space! http://www.eurobricks.com/forum/index.php?showtopic=89555 But, as always, if I would touch that ship of mine right now, I would build a lot of things differently. Quote
Captain Golden Hook Posted May 30, 2014 Author Posted May 30, 2014 thanks, i will make more room! Quote
Kolonialbeamter Posted May 31, 2014 Posted May 31, 2014 Quite nice so far. It seems, Sebeus unintentionally started some kind of naval arms race... For the stern I'm with Captain Braunsfeld, techniques are more or less standard, just check around for inspiration, you'll get a feeling for it. For the rest, is there a reason for having so little fire power? Usually four studs in between cannons are enough. More guns are always better! And I also suggest to move the mainmast a little bit backwards, say 2-4 studs, depending on your stern design. Looking forward for more! Regards Quote
Cousarmy0001 Posted May 31, 2014 Posted May 31, 2014 (edited) When I originally built Thunderchild (I can't seem to find the thread anymore), which has 4 hull mid-sections, she had 10 guns, but after finishing, I felt that was too few for a ship of her size. I think originally I had 5 studs between each gun, but I shrank it to 3 with the redesign, and now there's 14 guns, with ample room for a cabin, as well as a kitchen/wardroom (the latter of which I haven't bothered with actually building because only the quarterdeck can be removed, and that only covers the captain's cabin). If you like, I can post some pictures of the interior and exterior of those to give you some ideas. *correction* Thunderchild can be found at http://www.eurobricks.com/forum/index.php?showtopic=66990#entry1222088 Edited May 31, 2014 by Cousarmy0001 Quote
Sebeus I Posted May 31, 2014 Posted May 31, 2014 (edited) hey everyone, after seeing sebeus's new wip frigate, i got inspired to build the redcoat counterpart of it. i wanted to use sebeus's tumblehome technique, but i soon found that it ended up with a rather flat side. I can explain that .The technique works best if you keep the ship low (the broadsides in particular) and the broadsides should have a rather sharp angle (which is part of the reason why the ship should be kept low).The angle I use is about the same as the one in a 2x2x2 slope brick. I noticed you used such parts on the bow, that's how I can see the angle of your broadsides isn't sharp enough . A tip I should give is to use shorter hinges (a combination of these and these for example). In my technique this angle has a great influence on the shape of the ship seen from above.Furthermore you will find that after adding channels for the rigging, cannon hatches, catheads, galleries, etc. the flat sides will become less of an issue. I like what you have so far, that mortar on the bow sure is a force to consider .As for the cabin, there are many possibilities, one that wuld suit well I think is the construction like CGH's frigate (you'll have to scroll down a bit). But the stern I constructed for my WIP corvette would certainly work here as well.Maybe you have a preference on what windows to use?Keep it up . Quite nice so far. It seems, Sebeus unintentionally started some kind of naval arms race... Appearently . Edited May 31, 2014 by Sebeus I Quote
Captain Braunsfeld Posted May 31, 2014 Posted May 31, 2014 I like what you have so far, that mortar on the bow sure is a force to consider Oh, I see. I thought it was a cement mixer .... SCNR Wanna take a look at my "British mortars"? Quote
Captain Golden Hook Posted May 31, 2014 Author Posted May 31, 2014 finally finished it! thanks for all the input! image by captaingoldenhook, on Flickr image by captaingoldenhook, on Flickr when I finish making sails for it and rigging it i will post full pictures on a new topic. can one of the admins please close this topic now? Thanks ;P Quote
Mr. Townsend Posted May 31, 2014 Posted May 31, 2014 I was scrolling through your flickr stream yesterday when you posted this and I noticed you had rigged up your sloop and used the same string you utilize for anchor cables . On this ship I think you should find some form of string that might match better. The twine you use overpowers the LEGO due to its thickness and the tiny strands that always hang off. Something thinner would be best. I go for nylon but there are large assortments at any of your local stores. Quote
Captain Golden Hook Posted May 31, 2014 Author Posted May 31, 2014 ok, yea i will try to get my hands on some Quote
Commodore Ariel Brickson Posted June 1, 2014 Posted June 1, 2014 Really nice ship, I love this colour scheme. The solution for the stern ir really interesting...I will have it in mind in the future... Greetings, Commodore Ariel. Quote
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.