Jump to content
THIS IS THE TEST SITE OF EUROBRICKS! ×
THIS IS THE TEST SITE OF EUROBRICKS!

frechettemj

Eurobricks Vassals
  • Posts

    26
  • Joined

  • Last visited

About frechettemj

Spam Prevention

  • What is favorite LEGO theme? (we need this info to prevent spam)
    Technic
  • Which LEGO set did you recently purchase or build?
    42082

Profile Information

  • Gender
    Male

Extra

  • Country
    United States

Recent Profile Visitors

The recent visitors block is disabled and is not being shown to other users.

frechettemj's Achievements

Apprentice

Apprentice (3/14)

  • First Post
  • Collaborator
  • Conversation Starter
  • Week One Done
  • One Month Later

Recent Badges

  1. I was able to find them by searching #legotechnic on Twitter.
  2. Added a Liebherr-style V-Frame. This allows the suspended ballast to be moved back and forth in order to move the center of gravity to compensate for changing the angle of the main boom. It allows me to move the suspended ballast back 25 studs from the fully retracted position to the fully extended position. I also moved the main hoist to one of the winches located in the superstructure, and correctly routed the string to more correctly reflect a real crane of this scale. Enjoy! This is it's current configuration.
  3. I have this exact problem. I have a Samsung Galaxy S22+ and I'm using a a Steelseries Stratus Duo controller. BC2 version 3.2
  4. Looks good! Do the shock absorbers work well to keep the boom from falling backwards?
  5. I've been tinkering with my crane over the past few nights. I added back the derrick mast and suspended ballast tray. There's 3 pounds of weight in the Liebherr 9800 bucket, 2 pounds in the counterweight, and 2 more in the suspended ballast tray. The ballast tray can be lifted off of the ground by the two long actuators mounted on the top of the derrick mast. I redesigned the attachment of the boom hoist to make it more realistic. The boom foot and attachment has been modified to allow the main boom to be lowered to below horizontal, in order to add realisim.
  6. Here's it in an earlier version. It's about 7 feet tall in this configuration. The version in my original post is still capable of this configuration but it's really not the most convenient way to display the model. The crane is able to self-erect in this configuration, with the appropriate amount of counterweight.
  7. Thanks!! Thanks! My plan going in was to focus primarily on playability, but I tried to make it as realistic looking as possible. I will admit that I copied the cab design from the 42042, but I added the cab tilt. I have had the main winch run off of the second winch in the body of the crane, but I've found it a whole lot easier to have the winches accessible to make it easier to rig the string for the hooks. The foot of the boom was originally a normal triangle, but I modified so that the boom could lower to (nearly) horizontal. It was easier to modify the boom than to redesign the area around where it attached to the main body. I honestly have no idea.
  8. I've created a Liebherr inspired crawler crane. I designed it with more of a focus on playability, over trying to create an exact copy of any particular model. It's 5 feet tall to the tip of the jib boom, and 4 feet to the main winch. It's fully RC, powered by a combination of Control+ and Power Functions. There's a Control+ hub in the base, and a Buwizz3 in the main body, all controlled by the BrickController2 app and a gamepad. The base is powered by a Control+ hub with XL motors driving the tracks and an L motor for slewing The base was built with multiple 5x7 panels stacked side by side to create a base that would be stiff enough to not flex under the weight of the crane in addition to any counterweight that I added. Here's the base with 10 lbs of lead weights stacked on top. There's almost no flex across the frame. The tracks are detachable, and are geared down enough to allow the crane to move and turn on hard surfaces. The counterweights contain 1 lb lead diving weights, and more can be added if needed. Enjoy!
  9. Right. My crane is loosely inspired by one of the larger Liebherrs.
  10. Indeed. Just offering an example.
  11. Here's what I've got for tracks. They're geared way down, so it'll drive and turn on carpet. 20220325_223415 by Matthew Frechette, on Flickr
  12. Buwizz 3.0 in the superstructure and a Control + in the base. 20210720_221201
  13. The speed function does not work with mine either. I have a 3.0 and the latest version of the Android app.
×
×
  • Create New...