[TC6] Technic SBrick Contest - Entry Topic - Page 2 - LEGO Technic, Mindstorms, Model Team and Scale Modeling

Jim · 2014-12-19T09:43:16+00:00

25. Liebherr LR 634 Functions: XL Motor for left track XL Motor for right track 2 M Motors for raising/lowering the arm M Motor for operating bucket Manual functions: 2 LA's operating Ripper Openable doors, tool boxes and engine tower panels Adjustable seat in the cabin Adjustable suspension-lowering/rising at the front 2 positions Features: Pendular suspension via self balancing equalizer bar. Small turntables used as as indestructible bearings for tracks ans drive sprocket wheels Support rod that keeps tracks parallel to each other no matter the weight aplied Front sprockets tensioners VIDEO: Main topic

February 15, 201510 yr

25. Liebherr LR 634

Functions:

XL Motor for left track
XL Motor for right track
2 M Motors for raising/lowering the arm
M Motor for operating bucket

Manual functions:

2 LA's operating Ripper
Openable doors, tool boxes and engine tower panels
Adjustable seat in the cabin
Adjustable suspension-lowering/rising at the front 2 positions

Features:

Pendular suspension via self balancing equalizer bar.
Small turntables used as as indestructible bearings for tracks ans drive sprocket wheels
Support rod that keeps tracks parallel to each other no matter the weight aplied
Front sprockets tensioners

VIDEO:

Main topic

Edited February 15, 201510 yr by Milan

February 15, 201510 yr

26. Alfa Romeo 4C Spider

Functions:

Fully remote controlled

1M motor for gear selection (sequential gearbox)

1L motor for drive (and fake V4 engine)

1L motor for the seats

1 servo motor for steering

The gear selector changes gears on both the gear box for driving (1st to 4th gear) and for the seat operation (left/right, forward/backward, tilt seat rest)

Other noteworthy features:

Independent suspension on all wheels (McPherson at the back, double wishbone at the front)

High rev V4 fake engine, driven by the L-motor

Openable bonnet, rear bonnet, doors (the doors lock into place when closed)

Fake diskbrakes on all wheels

Pictures:

Video:

Discussion topic:

http://www.eurobrick...howtopic=103996

LDD file:

http://www.bricksafe...///AR4C_v17.lxf

February 15, 201510 yr

27. MAN Transport Truck

My model have 4 powered motors. I use a gearbox, so i have 7 functions motorised.

Primary functions:

Selection of operating mode [Driving - Manual - Handling] (M-motor)

-Driving :

Steering (M-motor)
Driving (XL-motor)
Outrigger (M-motor)

-Handling:

Open arm (M-motor)
UP arm (XL-motor)
Rotate arm (M-motor)

Secondary functions:

Hog-steering
Independent suspension
Cab tilt
V6 fake engine
Openable doors
Openable dropside
Telescopic section

Accessories:

Realistic palet forks
Gravity gripper
Trailer (fully suspended, openable dropside ...)

Video:

Pictures:

Thanks legolijntje for HD render

Discussion topic: http://www.eurobrick...howtopic=104085

Edited February 15, 201510 yr by TeClem8

February 15, 201510 yr

28. Hyster 32-12 Heavy Forklift

Discussion topic:

http://www.eurobrick...pic=103878&st=0

Sbrick/2 IR Functions:

2x XL motors for driving
1x M motor for steering
2x L motors for tilting the mast
2x L motors for lifting the forks

Other functions/features:

Led lights
Rear steered pendular axle
Openable cabin doors (and lockable)
Folding cabin (for fake oil pump inspection)
Openable side engine covers (for engine check and battery access)
Openable top grid (for switching lights on/off)
Extendable forks (manual)
Fake 6 inline cylinders engine
Working steering wheel in the cabin

Video:

Edited February 15, 201510 yr by TheItalianBrick

February 15, 201510 yr

29. Motorstorm Pacific Rift Truck - Molotov Baikal

FUNCTIONS

1) steering

2)driving

3)shifting gear

4)boost

POWER FUNCTIONS/ ELECTRONICS

1 M motor

1 L motor

1 Buggy motor

1 Servo motor

1 Rechargeable battery box

1 Old 9V motor

1 PF switch

2 IR receiver

5 PF extension wire

INFO

AWD drive with 2 differential

2 speed gearbox: 2,3:1-1,4:1

front and rear live axles

2 shocks absorbers each wheel

FRONT light and medium 9M shocks

REAR light 6,5M shocks

weight: 1,5 kg (approx)

wide: 15M

length: 54M

tall: 27M

PHOTOS OF THE "REAL" TRUCK

PHOTOS OF MY TRUCK (with an sbrick placeholder instead of 2 IR receivers in the first two images, detailed photos on the link at the bottom of the post)

VIDEO

SHORT SUMMARY

WEAKNESSES

-slow acceleration and low torque

-high steering range

-aesthetics breaks when it crashes

-boost don't explode if overloaded :(

STRENGTHS

-slow acceleration, low torque and high steering range make its features similar to the ones of trucks in the game

-probably an AAA battery box can increase torque/speed

-easily removable bodywork

-really funny to drive on smooth surface like wood flooring

-robust chassis that could be used as a platform for other trucks

-it crashes like in Motorstorm :3 (more or less)

MORE PHOTOS

WIP PHOTOS

DISCUSSION TOPIC

Edited February 15, 201510 yr by PKW

February 15, 201510 yr

30. Zis E134 Trial Truck

This is my contribution to the Contest!

Its a Zis E134 Trial Truck. Yes a Trial Truck ;) Nothing special you think? Let me change your mind!

Its full with Power Function Motors.

Facts:

Function 1 and 2:

2 or 4 XL Motors for driving ( via a switch controlled by a M-Motor you can either select 2 XL or 4 XL Motor for propulsion.

Function 3:

2 L Motors for Steering

Function 4:

A Gearbox with 2 Gears. Low and High Gear selected via a M-Motor. One for the crawling and one for flat surfaces.

Other functions:

Hood and trunk can be opened

Working Fake-Engine under the Hood.

2 LED on top and 1 LED in the back.

Everything is controlled via the S-Brick App. (I am glad i got the Beta version working since the App is very buggy at the Moment and unpredictable. :( But the Teams is working on that.

Here are some Pictures. and at the End a Video. Regarding the Video please keep in Mind that i used a old Digicam for the parts in which i couldn't use my Iphone 6, because i can't use the SBRICK APP and the Camera at the same time :( . But you get the Idea and i hope you like the Design and the Power of that Truck.

VIDEO

February 15, 201510 yr

31. Mech Mini

TOPIC

Functions:

drive and steer

move arms

open/close claw

boxing arm

turning eye

rising antenna

Power Functions:

2 IR receiver

1 AAA battery box

2 L motors for the tracks

1 M motor for arm movement and operating the gearbox

1 M motor for the claw / boxing arm

Video:

Edited February 15, 201510 yr by Fissl

February 15, 201510 yr

32. The Wiggle Truck

It's my first MOC using studless (technic) Lego.

I always wanted to create a vehicle whose control is based on the tilt of the vehicle.

Functions:

The "Wiggle Truck" is equipped with 5 motors connected to a SBrick.

1 Servo steering (tilting the main body)

2 XL motors for propulsion

1L engine for lifting

1L motor for rotating

The 2 XL motors are connected to 1 output of the SBrick and works perfect.

Link to the topic: http://www.eurobrick...howtopic=105794

The video

Pictures

Wiggetruck 01 by miketwo9398, on Flickr

Wiggetruck 02 Inside by miketwo9398, on Flickr

Wiggetruck 03 Steering neutral by miketwo9398, on Flickr

Wiggetruck 04 Steering by miketwo9398, on Flickr

Wiggetruck 05 lifted open door by miketwo9398, on Flickr

Wiggetruck 06 lifted by miketwo9398, on Flickr

Thanks

@ JIM: can you change / add [TC6] to the topic, it is my first entry with pictures and video etc. and all wend wrong the first time.

And after the entry I found out that I forgot the [TC6].

February 15, 201510 yr

33. Wall-E

RC Functions:

- 2 L motors for the tracks to drive and steer

- 2 M motors to move the arms individually

- Combined the same 2 M motors, through a differential gearbox, lift Wall-E which result in tilting his head and folding his tracks

Manual functions:

- Poseable hands

Images:

Video:

Discussion topic

February 15, 201510 yr

34. Whirligig

Functions:

1. Rotating superstructure. (L motor, speed control with train remote a)

2. Main arm rising/lowering (XL motor - standart remote a)

3. Secondary arm moving ( L motor, - standart remote b)

4. Basket rotating (M motor - speed control with train remote b)

Video

Topic

http://www.eurobrick...opic=105527&hl=

February 15, 201510 yr

35. Radical RXC V8

RC functions:

Drive- 1 Servo motor is connected to the IR receiver to turn on and off the AAA battery box. The battery box powers 4 L motors.

Steering- 1 Servo motor is used to steer the front wheels.

Adjustable Pneumatic Front Suspension- 1 M motor is used to power the mini pump and to switch the direction of the switch. The suspension can be raised mechanically and lowered by gravity.

Gearbox Selector- 1 XL motor is used to control the 2 speed + neutral + reverse gearbox. It is a sequential gearbox.

Features/functions:

- Double Wishbone longitudinal push-rod suspension on all wheels.

- Opening Gullwing doors

- Realistic model Flat-plane crankshaft V8 engine (not the weird LEGO configuration.)

- Complete red and black bodywork

- No interior due to battery box, wires, and receivers

The Video:

Pictures:

Please vote for me!

Edited February 16, 201510 yr by Epic Technic

February 15, 201510 yr

36. Compact Motorized Forklift

This a very efficient, lightweight yet powerfull forklift. All functions are motorized with 4 medium motors.

Features:

- Front wheel drive with differential

- Pendular rear axle with ackermann steering geometry

- Lifting mechanism with double chains for max lift force of over 500 grams (it can lift more than its own weight)

- Fork tilting mechanism

Video:

Topic:

http://www.eurobrick...howtopic=105902

Edited February 16, 201510 yr by Zblj

February 15, 201510 yr

37. LINDE INSPIRED FORKLIFT - 3 TON

RC PF functions:

- Drive by XL motor.

- Steering by Servo

- Mast tilt by M motor.

- Fork lift by L motor.

Manual functions:

- Interchangeable carriages for equipment.

- One Carriage with Adjustable interchangeable forks and towing hook.

- Rear towing hook.

- Removable LPG bottle.

- Opening rear panels to allow access to remove counter weight (battery box). Fits both standard and LiPo/AAA box battery box.

- Opening seat compartment to access technical functions (switch and PF recievers/Sbrick). Just like a real forklift where this gives access to motor or batteries.

- Opening "hood" to switch battery box on/off

Other functions:

- Steering wheel that turns along with the servo. Achieved through flex axle from a Znap set.

- Front, Rear and Work lights - controlled by manual switch

Pictures:

From behind; max turning angle. forks in top position.

Front view; forks in top position.

Cabin interior; dashboard above the wheel, heater with 3 "buttons" below the wheel, speaker in silver to the left and right of the dashboard, and hydraulics control on the right. The seat can barely be seen in the lower middle of the pic.

Detail shot from the rear; light on, with the seat dismantled (it was very hard to show it in any other shots)

Panels, interior and battery box removed; large motor for lift visible in the lower middle, and gear train for lift and tilt visible.

Video: (Please excuse the music, it was to boring without, and I've never used music in a video before...)

Finally, my video is uploading. It will be available here (

), and I will add the video when it's done.

I've had some trouble with my camera, and with uploading and editing the video but it will be up soon.

Link to the discussion topic

February 15, 201510 yr

38. Terrafugia Transition Street-legal Aircraft

Ch1 - L Motor for drive

Ch2 - M motor to adjust the pitch of the elevator

Ch3 - M Motor to open the wings, turn on the prop (L Motor & Switch) and connect the steering servo to the rudders (all at the same time).

Ch4 - Servo for steering front wheels (and rudders but only when the wings are extended)

1 by jamesjtillson, on Flickr

2 by jamesjtillson, on Flickr

3 by jamesjtillson, on Flickr

4 by jamesjtillson, on Flickr

5 by jamesjtillson, on Flickr

http://www.eurobrick...howtopic=105633

February 15, 201510 yr

39. Ice Mole

So, this is my TBM (Tunnel Boring Machine), built for the sole purpose of breaking into snow banks, for the joy of my kids.

It uses 4 L motors and needs 2 IR receivers, so using an sBrick for it is the perfect choice, as under 30 cm of snow, IR will fail, Bluetooth will prevail ;)

Specs:

Part count: 1235 (more or less)
Weight: 1.5 Kg (exactly)
Dimensions: 36(L) x 18(l) x 16(h) cm
Drills: 5 (only)

Functions:

L motor for left track
L motor for right track
L motor for main drill
L motor for the 4 side drills

Manual functions:

Open-able 2-sided top
Small door to see the internals

Features

Spring loaded track suspension
Back-loaded weight for balance

Pictures:

Video just as a link, no clue how to embed it from Flickr.

https://flic.kr/p/qfYDWX

Link to TC6 thread (WIP)

http://www.eurobrick...opic=105695&hl=

Thanks for this awesome contest, good luck to you all!

PS: Sorry for the photo/video quality, it's hard at night and I was really running out of time.

If possible, I would make better ones and replace these, by the time of the voting :)

Due to lack of snow, I had no possibility to test/film it outside, as I intended...

Edited February 15, 201510 yr by braker23

February 15, 201510 yr

40. Civil Titan Tank Bridge Layer

Function:

Track A&B: two XL motor

Stabilizating turret: one L motor 1 big linear actuator

Lowering/liftinr arm: one M motor 2 big linear actuator

Other feature:

Spring suspension 6 med shock abs

Chain tensioner 2 big shock abs

Operating stairs on both side

Comand turret

Openable motor hood

Openable maintenance portel

6 V fake motor

Cooling motor fan

2 big shock abs for help in the initial part of discharge

Tread page (soon updating more photo...)

Hope you enjoy it!

February 15, 201510 yr

41. TOYOTA Land Cruiser FJ45 with snow plow attachment

Scale model of Toyota Long bed truck (FJ45)

Features:

• All time 4x4 transmission

• 2-speed manual gearbox (high/low ratio)

• Live axles suspension with 2 link + panhard rod at each

• Openable doors with locks, bonnet, bed door

• Convertible roof

• Detailed saloon

• Customs stickers

• FJ45 custome Sbrick control profile was designed at designer.sbrick.com

• John Deere color scheme

Motorized functions:

• Propulsion: XL-motor

• Steering: Servo-motor

• Winch/Plow elevation: M-motor

• Snow plow tilt left/right: M-motor

Powered by LiPo battery block thru Smart Brick final release unit (sbrick.com)

+ Additional plow PF LED-lights

Plow is elevated by winch. This scheme is popular in cheap and simple snow plows. Tilt in such model usually manually customized or use hydraulics. I used lever-push mechanism to tilt left/right. Plow can be dropped easily and you can use winch as regular.